Research Publications

Papers Published in Journals

1. C.S. Sharma & Rajesh Kumar (2024). Use of low-grade limestone slurry to develop Sustainable low carbon Portland Limestone cementitious material. ISBN: 978-93-5764-275-0, p 76-84. BFC Publications, India.
2. Sahai R., Bisht R. S., Malviya N. K., Kumar S., Singh S., & Panigrahi S. K. (2024). Aspects of Waste Material Utilization and 3D Concrete Printer Development Approach: A Review. Transactions of the Indian National Academy of Engineering.
3. Alam, Development of correlations of Nusselt number and friction factor of solar thermal collector equipped with hybrid rib roughness, Sol. Energy Mater. Sol. Cells. 272 (2024) 112887. (IF. 6.9)
4. Ali, S. Srivastava, I. Haque, J. Yadav, T. Alam, T.U. Siddiqui, M.I.H. Siddiqui, E. Cuce, Heat dissipation and fluid flow in micro-channel heat sink equipped with semi-elliptical pin-fin structures: A numerical study, Int. Commun. Heat Mass Transf. 155 (2024) 107492. (IF. 7.0)
5. Kuchipudi, Sai Teja, and Debdutta Ghosh. “Automated detection and segmentation of internal defects in reinforced concrete using deep learning on ultrasonic images.” Construction and Building Materials 411 (2024): 134491
6. Nawal Kishor Banjara, Saptarshi Sasmal, Santosh Kapuria, (2024), “Fatigue and leakage-type damage detection in metallic plates and pipelines using piezoelectric patch acoustic sensors”, International Journal of Pressure Vessels and Piping, vol. 209, 105162. (Online 29th Feb., 2024) [I.F. 3.0].
7. A Tripathi, Ajeet Kr. Verma, Ashok Kr. Singh, A Pain, Nachiketa Rai and Amit Kr. Verma, (2024). “Control of microstructural and mineralogical characteristics on thermo-elastic behaviour of coal-bearing sandstone under mild to high-temperature regimes: Experimental investigation and development of AI prediction model.” Journal of Earth System Science, Springer, 133 (2), 58 (IF: 1.9/2022) [DOI: 10.1007/s12040-024-02264-9].
8. S. Ramakrishna Annapareddy, Adnan Sufian, A Pain, Alexander Scheuermann, (2024). “A generalised framework to estimate the seismic active thrust on rigid retaining walls with partially saturated backfill.” International Journal of Geomechanics, ASCE, 24 (6), 06024008 (IF: 3.7/2022) [DOI: 10.1061/IJGNAI.GMENG-8995].
9. Mahesh Sharma, Suvam Das, A Pain, D P Kanungo and S Sarkar, (2024) “Preliminary Assessment of the Shiv Bawdi Landslide in Shimla, Himachal Pradesh, India.” Landslides, Springer (IF: 6.7/2022) [Available online with DOI: 10.1007/s10346-024-02234-8].
10. Adarsh Tripathi, Mohammad Mohsin Khan, Anindya Pain, Nachiketa Rai and Mohd Ashraf Iqbal (2024) “Experimental Study on the Quasi-Static and Dynamic Tensile behaviour of Thermally Treated Barakar Sandstone in Jharia Coal Mine Fire Region, India.” Scientific Reports, Nature Publishing Group, Rep 14 (1), 5270 (2024). https://doi.org/10.1038/s41598-024-54199-2 (If: 4.6/2022).
11. Kundu, A Pain and J Das, (2024) “Earthquake-induced liquefaction potential and risk assessment of the World’s largest mobile manufacturing plant, Noida, Uttar Pradesh.” Environmental Earth Sciences, Springer, 83 (7), 194 (IF: 2.8/2022) [DOI: 10.1007/s12665-024-11494-5].
12. Kundu, J Das, A Pain and I Pal (2024) “Unveiling Earthquake Hazard in Noida, India: A Combined Probabilistic and Deterministic Seismic Hazard Assessment.” Innovative Infrastructure Solutions, Springer (IF: 2.4/2022) [Available online with DOI: 10.1007/s41062-024-01390-z]
13. Vijay Tarun Kumar Moka, Chidambaram, R.S. (2024) “Cyclic Behaviour of Precast Beam-Column Connections with Shear Key and Hybrid Rebar Coupler: An Experimental Study” Structures Journal. (I.F: 4.1)
14. Md. Muslim Ansari and Ajay Chourasia, “Performance of headed FRP bar reinforced concrete Beam-Column Joint,” Structural Engineering and Mechanics, vol. 90, no. 1, pp. 71–81, 2024.  (SCI, IF-)
15. Aziz G, Ahmad A, Md Muslim Ansari, “Investigating the High Temperature Performance of Asphalt Binders Blended with Nano-Cenospheres”, Journal of Materials in Civil Engineering (ASCE), March, 2024 (Accepted) (SCI, IF-)
16. Kumar, G.P. Singh, M. Kumar, A. Kumar, P. Singh, A.K. Ansu, A. Sharma, T. Alam, A.S. Yadav, and D. Dobrota, “Nanocomposite marvels: unveiling breakthroughs in photocatalytic water splitting for enhanced hydrogen evolution,” ACS OMEGA, 9 (6) 6147–6164 (2024). doi:10.1021/acsomega.3c07822.
17. Cuce, S. Shaik, A. Roy, C. Arumugam, A. Afzal, P.M. Cuce, A. Ghosh, T. Alam, and S.V. Shaik, “Thermal analysis of building roofs with latent heat storage for reduction in energy consumption and co2 emissions: an experimental and numerical research,” Advances in Civil Engineering, 2024 (2024). doi:10.1155/2024/6676188.
18. Priyanka, S. Kumar, A. Kumar, T. Alam, M.I.H. Siddiqui, and D. Dobrotă, “Novel entropy generation and optimization for hybrid nanofluid flow via ribbed surface parabolic trough collector,” Case Study in Thermal Engineering, 56 (March) 104231 (2024). doi:10.1016/j.csite.2024.104231.
19. Kumar, Priyanka, S. Kumar, R. Maithani, S. Sharma, T. Alam, M.I.H. Siddiqui, D. Dobrotă, and I.M. Rotaru, “Influence of 45ov-type with collective ring turbulence promoters parameters of thermal performance of flat plate heat collector,” Case Study in Thermal Engineering, 55 (2024). doi:10.1016/j.csite.2024.104113.
20. Kumar, R. Kunwer, R.K. Donga, Priyanka, S. Kumar, T. Alam, M.I.H. Siddiqui, and D. Dobrotă, “Effect of oval rib parameters on heat transfer enhancement of tio2/water nanofluid flow through parabolic trough collector,” Case Study in Thermal Engineering, 55 (2024). doi:10.1016/j.csite.2024.104080.
21. Kant, T. Alam, D. Singh, A. Sabeeh, M.I.H. Siddiqui, Heat transfer and flow behavior in solar thermal collector equipped with obstacles, Int. J. Heat Fluid Flow. 107 (2024) 109390. (IF. 2.6)
22. Rawat, P. Bhandari, V.S. Bisht, T. Alam, M.I.H. Siddiqui, Numerical Investigation of Adiabatic Ice Slurry Flow through a Horizontal T–Shaped Pipe, Fluid Dyn. 59 (2024) 344–362.
23. V.G. Ganesan, R. Naren Shankar, K. Satish Kumar, N. Kumar Gupta, R. Balaji, R. Kumar, T. Alam, D. Dobrotă, Effect of increasing bypass ratio on supersonic co-flowing jet with finite lip thickness, Int. J. Heat Fluid Flow. 107 (2024) 109386. (IF. 2.6)
24. A.F. Minai, A.A. Khan, Kitmo, M.F. Ndiaye, T. Alam, R. Khargotra, T. Singh, Evolution and role of virtual power plants: Market strategy with integration of renewable based microgrids, Energy Strateg. Rev. 53 (2024) 101390. (IF. 8.2)
25. Md Mustafa Kamal, Ali Abbas, Tabish Alam, Rohit Khargotra, Influence of Water Flow Speed on the Torque Behaviour of the Hybrid HKT Having Straight and Helical Bladed Savonius Rotor, CFD Lett. 16 (2024) 114–125.
26. Singh, S., Maiti, S., Bisht, R. S., Panigrahi, S. K., & Yadav, S. (2024). Large CO2 reduction and enhanced thermal performance of agro-forestry, construction and demolition waste based fly ash bricks for sustainable construction. Scientific Reports, 14(1), 8368. (IF. 4.6)
27. Panigrahi S. K., Patel C., Chourasia A., and Bisht R. S.  “Cross-correlation difference matrix based structural damage detection approach for building structures” J Civil Struct Health Monit (2024). https://doi.org/10.1007/s13349-024-00781-1 (Impact factor: 4.4)
28. Pudovikov, Sergey, Sai Teja Kuchipudi, Debdutta Ghosh, Herbert Wiggenhauser, and Ute Rabe. “Bewertung der Tiefe von senkrechten Rissen mit Restwandstärke in Beton mit Ultraschall-Tomografie.” (2024
29. Mukherjee, Rajesh Kumar*, A. Sofi & M. Behera (2024). Rheological and mechanical properties of different types of lightweight aggregate concrete. Industry 4.0 with Modern Technology, 248-253. https://doi.org/10.1201/9781003450924-46.
30. D.K. Das, Rajesh Kumar* & A. Sofi (2024). Hydration kinetics and stability study of pure phases of cement clinker with the addition of SCMs and dopants. Industry 4.0 with Modern Technology, 266-269. https://doi.org/10.1201/9781003450924-49.
31. Agarwal, E., Pain, A., Annapareddy, V. R., & Zhou, A. (2024). Probabilistic Seismic Stability Analysis of Reinforced Soil Retaining Structures in Partially Saturated Conditions. International Journal of Geomechanics, 24(8), 04024169 [DOI: https://doi.org/10.1061/IJGNAI.GMENG-9445]
32. Piyush Verma, Rajesh Kumar, Snigdhajit Mukherjee, Mahesh Sharma (2024). Sustainable self-compacting concrete with marble slurry and fly ash: Statistical modeling, microstructural investigations, and rheological characterization. Journal of Building Engineering, 94, 109785. https://doi.org/10.1016/j.jobe.2024.109785 (Impact Factor: 6.7/Q1/Ref. JCR 2024
33. Chandrabhan Patel, Kanti L. Solanki, Vikesh Kumar, V. Chakradhar, Soraj Kumar Panigrahi (2024). “IoT-Driven Monitoring and Controlling to Improve Performance of Thermoelectric Air Conditioning System”, Journal of Building Engineering on (https://doi.org/10.1016/j.jobe.2024.110081) (IF: 6.7, Q1).
34. Shanmugam, G.K., Jeeva, S.K., Godson, M.D., Madhiyarasu, P. and Abishek, R.R., (2024). Experimental evaluation of geotextile in-filled sand cushioning system against rock fall impact using 2D digital image correlation technique.  Measurement, p.115181. (https://doi.org/10.1016/ j.measurement.2024.115181)
35. Nagesh, Santha Kumar and Ganesh Kumar (2024). “Influence of Soil Contaminated Water on Clogging Phenomenon of different void based pervious concrete” Magazine of Concrete Research, ICE Publishing, UK (IF : 2.46, Q1)
36. Ajay Chourasia, Mickey Mecon Dalbehera, Ashish Kapoor, Kishor S. Kulkarni, Govind Gaurav, Satyavrat Singh, and Ramancharla Pradeep Kumar, (2024). Damage assessment of buildings due to land subsidence in Joshimath town of Northwestern Himalaya, India. Journal of Natural Hazards (IF 3.7) Springer.
37. Jyoti and S. K. Singh., 2024. “Development of newer composite cement with processed ladle furnace slag: properties and comparative assessment”. Journal of Materials in Civil Engineering, ASCE, Impact Factor-3.2, Q1 (Accepted in June 2024).
38. Behaviour and design of cold-formed high-strength steel built-up beams. Journal: Thin-Walled Structures (2024): 112143. Authors:  Kumar, S. Kavin, M. Anbarasu, and Chanchal Sonkar. Impact Factor: 5.7.
39. Chandrabhan Patel, Kanti L. Solanki, Vikesh Kumar, V. Chakradhar, Soraj Kumar PanigrahiKumar (2024). IoT-driven monitoring and controlling to improve performance of thermoelectric air conditioning system. Journal of Building Engineering. https://doi.org/10.1016/j.jobe.2024.110081 (IF: 6.7)
40. Shewale, M., Bahrami, A., Murthi, P., & Chidambaram, R. S. (2024). Enhancing Load-Carrying Capacity of Reinforced Concrete Columns with High Aspect Ratio Using Textile-Reinforced Mortar Systems. Buildings, 14(7).
41. Piyush Verma, Rajesh Kumar, Snigdhajit Mukherjee, Mahesh Sharma (2024). Sustainable self-compacting concrete with marble slurry and fly ash: Statistical modeling, microstructural investigations, and rheological characterization. Journal of Building Engineering, 94, 109785. DOI: 10.1016/j.jobe.2024.109785 (Impact Factor: 6.7/Q1/Ref. JCR 2024)
42. Semwal, A. Prajapati, Rajesh Kumar, Sachin Kashyap, Shahnavaz Khan, RS Chidambaram, Gunjan Joshi, Rajni Lakhani (2024). “Thermo-mechanical behaviour of lightweight precast sandwich panel incorporated with solid waste – An Experimental Investigation”. Technologies for Sustainable Buildings and Infrastructure, Springer. DOI: 10.1007/978-981-97-4844-0.
43. K. Malviya & M. Samanta (2024), “Lateral load sharing and response of piled raft foundation in cohesionless medium: An experimental approach”, Geomechanics and Engineering: An International Journal, (IF 2.5), Techno Press.
44. Mittal, M. Samanta & D. Kanungo (2024), “Influence of isolated footing embedment on the seismic performance of building considering the soil-foundation-structure interaction: An experimental approach” Journal of Rock Mechanics and Geotechnical Engineering, (IF 9.4), Elsevier.
45. Mittal & M. Samanta (2024), “Influence of spacing and slenderness ratio of end-socketed pile foundation on seismic response of building considering soil pile structure interaction: An experimental approach” Journal of Structural Engineering, (IF 3.7), ASCE.
46. Vaibhav Mittal, Manojit Samanta and Madan Chandra Maurya, “Effect of Soil Constitutive Model & Slenderness Ratio of Piles on Seismic Performance of moment -Resisting Frames supported on Pile Foundation considering Soil-Pile -Structure Interaction” in the Journal Practice Periodical on Structural Design and Construction (IF -1.6)
47. Saumiyaa, K.S., Anbarasu, M. and Sonkar, C., 2024, October. Behaviour and design of cold-formed ultra-high-strength steel hollow section column members. In Structures (Vol. 68, p. 107122). Elsevier. DOI: https://doi.org/10.1016/j.istruc.2024.107122.
48. Vishwakarma, P.K., Mishra, K.B. & Aravind Kumar, A., 2024, Experimental Investigation on the Variation in Solid Fuel Fire Whirl Properties with Imposed and Fuel Rotation. Fire Technol (2024). https://doi.org/10.1007/s10694-024-01627-4. (IF:2.3).
49. M.S.Aswathy,2024, Assessment of Tunneling-Induced Surface Settlement by Linear Regression Method.Indian Geotechnical Journal.https://api.semanticscholar.org/CorpusID:271521564.
50. Sahai, R., Bisht, R. S., Singh, S., & Panigrahi, S. K. (2024). Design analysis and development of a gantry robot for multi-layer 3-D concrete printing with simulation and experimental validation. Mechanics Based Design of Structures and Machines, 1-30 ( impact factor: 2.9).
51. Sini Kushwah, Shweta Singh, Rachit Agarwal, Nikhil Sanjay Nighot, Rajesh Kumar, Humaira Athar &SrinivasaraoNaik B. Mixture of biochar as a green additive in cement-based materials for carbon dioxide sequestration. J Mater. Sci: Mater Eng. 19, 27 (2024).
52. PiyushVerma, Rajesh Kumar*, Snigdhajit Mukherjee, Mahesh Sharma (2024). “Rheological and Mechanical Properties of Self-Compacting Concrete under Partial Replacement of Marble Slurry and Fly Ash”. Technologies for Sustainable Buildings and Infrastructure, Springer. DOI : 10.1007/978-981-97-4844-0.
53. ShubhamSemwal, AbhilashaPrajapati, Rajesh Kumar*, SachinKashyap, Shahnavaz Khan, RS Chidambaram, Gunjan Joshi, Rajni Lakhani (2024). “Thermo-mechanical behaviour of lightweight precast sandwich panel incorporated with solid waste – An Experimental Investigation”. Technologies for Sustainable Buildings and Infrastructure, Springer. DOI : 10.1007/978-981-97-4844-0.
54. Abhilasha Prajapati, Rajesh Kumar*, SoumitraMaiti, Rajni Lakhani, Amit Yadav (2024). “Impact of Foaming Agent: Water Ratio on Foam Stability of Lightweight Concrete”. Applied Engineering and Technology, Vol 3, No 2 (2024): August 2024. ISSN: 2829-4998. https://doi.org/10.31763/aet.v3i2.1397.
55. Pushpender Kumar, Nikhil Sanjay Nighot, Rajesh Kumar*, Surabhi, MS Kirgiz, ArpitGoyal (2024). “Advancements in Precast Concrete Sandwich Panels for Load Bearing Structures”. Applied Engineering and Technology, Vol 3, No 1 (2024): April 2024. ISSN: 2829-4998.
56. Pushpender Kumar, Rajesh Kumar*, Nikhil Sanjay Nighot, Surabhi, Mohd. Reyazur Rahman, R. Siva Chidambaram, Shahnawaz Khan (2024). “Improving Sustainability of Precast Concrete Sandwich Wall Panels through Stone Waste Aggregates and Supplementary Cementitious Materials”. Applied Engineering and Technology, Vol. 3, No. 2, August 2024, pp. 102-114. ISSN: 2829-4998
57. Ajay Chourasia,Kishor S. Kulkarni,SagarTomar, Mickey MeconDalbehera, Ashish Kapoor, Govind Gaurav, R. Pradeep Kumar (2025) 10:5 “Machine learning‑based rapid visual screening for building damage assessment: study of Joshimath town of Garhwal Himalaya” IndiaJournal of Building Pathology and Rehabilitation. https://doi.org/10.1007/s41024-024-00519-y
58. Kumar, P., Arora, H. C., Chidambaram, R. S.,& Kumar, A. (2024) Prediction of confined compressive strength of concrete column strengthened with FRCM composites. Structural Concrete.
59. Shewale, M., Murthi, P., Chidambaram, R. S., & Gobinath, R. (2024). Performance Evaluation of Hybrid Fiber‐Reinforced Inorganic Mortar for Textile‐Reinforced Mortar Applications. Advances in Civil Engineering (Wiley), 2024(1), 2370560.
60. Yogesh, R.V., Kumar, S.G. & Kumar, G.S (2024). Experimental investigations on granular column improvement in saturated ground subjected to repeated shaking events and its performance assessment in liquefaction and reliquefaction mitigation. Bulletin of Earthquake Engineering. https://doi.org/10.1007/s10518-024-02075-9. 
61. RV, Y., Kumar S, G., & Kumar G, S. (2024). Sustainable pervious concrete pile for liquefaction & re-liquefaction mitigation. Géotechnique Letters, 1-21. (https://doi.org/10.1680/jgele.24.00118).
62. Garg, Priyana, Raj Kumar, Harbaaz Singh, Meenakshi Goyal, Anupama Mogha, and Naina Gautam. “Isolation, Characterization, and Modification of Starch Isolated From Waste‐Cooked Non‐Waxy Rice Water.” Starch‐Stärke (2024): e202400053.
63. Shorab Jain, Deepika Sahni & R. Pradeep Kumar (2024), Fire Safety Audit of Buildings & Lessons Learnt from Urban India, The Bridge & Structural Engineer, Vol.54, No.3, pp 19-33, September 2024
64. Sandeep Gupta, CO2 Assisted Geo-polymerization: A Win-Win Pragmatic Approach for the Synthesis of Soda Ash Leading to Reversal of the Climate Clock, RSC Sustainability (Royal Society of Chemistry), 2024, 2, 3782-3787. DoI: https://doi.org/10.1039/D4SU00541D
65. Bhawani Antarvedi, Nawal Kishor Banjara & Suvir Singh, “Enhancing concrete performance at high temperatures through polypropylene fiber geometry optimization”, Indian Journal of Engineering & Materials Sciences, Vol. 31, December 2024, pp. DOI: 10.56042/ijems.v31i6.10959
66. P. Kundu, A. Pain, J. Das, A. Kumar. (2024) “Study of Seismic Site Effects and Development of Soil-Building Resonance Map of Noida City, The Industrial Hub of India.” Indian Geotechnical Journal, Springer (IF: 1.4/2023) [DOI: 10.1007/s40098-024-01134-x] (available online).
67. K. Verma, A. Pain, E. Agarwal, (2024). “Efficient Probabilistic Approach to Analyse Tunnel Support with Uncertain Probability Distribution Function of Input Parameters”, International Journal of Geomechanics, ASCE, 24 (12), 04024274 (IF: 3.3/2023) [DOI: 10.1061/IJGNAI.GMENG-9912].
68. Ekansh Agarwal, A Pain, V. S. Ramakrishna Annapareddy and Annan Zhou, (2024) “Probabilistic seismic stability analysis of reinforced soil retaining structures in partially saturated conditions.” International Journal of Geomechanics, ASCE, 24(8), 04024169(IF: 3.3/2023) [DOI:10.1061/IJGNAI.GMENG-944]

Papers Published in Journals:

1. Malviya DK, Samanta M, Dash RK, Kanungo DP (2023) Anthropogenic ally induced instability in road cut slopes along NH-39, Manipur, North-East Indian Himalaya: Assessment and Mitigation Measures. Environmental Development and Sustainability. https://doi.org/10.1007/s10668-023-02960-4 (SCIE, IF: 4.08).
2. Mohd Hanifa, Rachit Agarwal, U. Sharma, P.C Thapliyal and L.P. Singh “A review on CO₂ capture and sequestration in the construction industry: Emerging approaches and commercialized technologies” (IF: 8.3), Journal of CO₂ Utilization (Vol. 67, page number. 102292, published Date – 1 Jan 2023)
3. Solanki, A., Karade, S.R. and Singh, L.P., Sharma, U., 2023. A Review of C 3 a Hydration with Admixtures and Its Role in Sulfate Attack. Advances in Civil Engineering Materials, 12(1), pp.58-77.
4. Vaibhav Mittal, Manojit Samanta, Rajesh Kumar Dash, Philips Omuwumi Falae, D.P. Kanungo (2023), “Surface Explorations and Investigation of Foundation Performance for Distress Assessment of the Building.” Journal of Performance of Constructed Facilities (ASCE), https://ascelibrary.org/doi/abs/10.1061/JPCFEV.CFENG-4187.
5. Abhilasha, Rajesh Kumar, Rajni Lakhani, RK Mishra, S Khan (2023). Utilization of Solid Waste in the Production of Autoclaved Aerated Concrete and their Effects on its Physio-mechanical and Microstructural Properties: Alternative sources, characterization, and performance insights, International Journal of Concrete Structures and Materials, 17, Article number: 6, Springer Nature. https://doi.org/10.1186/s40069-022-00569-x (Impact Factor: 3.2/2021)
6. Anurag and Rajesh Kumar (2023). “Optimization of clinker factor for low carbon penta-blended cement mortar via Box-Behnken Design of Response Surface Methodology”, Recent Advances in Structural Engineering & Construction Management, Lecture Notes in Civil Engineering, vol 277. Springer.  https://doi.org/10.1007/978-981-19-4040-8_47
7. Goyal, A., & Karade, S. R. (2023). Effect of fly ash and red mud on strength and electrochemical properties of seawater mixed concrete. European Journal of Environmental and Civil Engineering. https://doi.org/110.1080/19648189.2023. 2194956
8. Hanifa, R. Agarwal, U. Sharma, Thapliyal, P. C., L. P. Singh, A review on CO2 capture and sequestration in the construction industry: Emerging approaches and commercialized technologies, Journal of CO2 Utilization, 67(1), 102292, 2023. (IF: 8.321)
9. Nighot, N. S., & Kumar, R. (2023). A comprehensive study on the synthesis and characterization of eco-cementitious binders using different kind of industrial wastes for sustainable development. Developments in the Built Environment, Elsevier, 100135. https://doi.org/10.1016/j.dibe.2023.100135 (Impact Factor: 5.563/2021)
10. Rajesh Kumar (2023). Recent progress in newer cementitious binders as an alternative to Portland cement: Need for the 21st century. Recent Advances in Structural Engineering & Construction Management, Lecture Notes in Civil Engineering, vol 277. Springer. https://doi.org/10.1007/978-981-19-4040-8_63
11. Singh, Siddharth, Mickey MeconDalbehera, SoumitraMaiti, Ravindra Singh Bisht, NageshBabuBalam, and Soraj Kumar Panigrahi. “Investigation of agro-forestry and construction demolition wastes in alkali-activated fly ash bricks as sustainable building materials.” Waste Management 159 (2023): 114-124. (I.F. 8.816, Q1)
12. Singh, Siddharth, Mickey MeconDalbehera, A. Aravind Kumar, Soumitra Maiti, NageshBabuBalam, Ravindra Singh Bisht, and Soraj Kumar Panigrahi. “Elevated temperature and performance behaviour of rice straw as waste bio-mass based foamed gypsum hollow blocks.” Journal of Building Engineering (2023): 106220. (I.F. 7.144, Q1)
13. Solanki A., Singh L. P., Karade S. R., and Sharma U. (2023) “A Review of C3A Hydration with Admixtures and Its Role in Sulfate Attack,” Advances in Civil Engineering Materials 12, no. 1: 58–77. https://doi.org/10.1520/ACEM20210158
14. Yumnam, Mahesh, Debdutta Ghosh, and Hina Gupta. “Empirical mode decomposition-based techniques for imaging of shallow delamination in concrete using impact echo. “Mechanical Systems and Signal Processing 184 (2023): 109668. (Impact Factor: 8.934)

Papers Published in Journals

1. Agarwal E, Pain A, Mukhopadhyay T, Metya S, Sarkar S. Efficient computational system reliability analysis of reinforced soil-retaining structures under seismic conditions including the effect of simulated noise. Engineering with Computers. 2022 Jun; 38(2):901-23.1-23. https://doi.org/10.1007/s00366-020-01281-8. (IF: 7.963)
2. Agarwal, E., & Pain, A (2022). Reliability assessment of reinforced slopes with unknown probability distribution. Geosynthetics International, ICE. https://doi.org/10.1680/jgein.21.00106 (IF: 4.565)
3. Charu Gupta, R. Siva Chidambaram and A.B. Danie Roy (2022) Shear Resistance Behavior of Exterior Beam-Column Joint with Steel Fiber Reinforced Concrete, Structural Integrity Book Series, Chapter, Springer Proceedings. (Web of Science Indexed)
4. Dahiya N, Pandit K and Sarkar S 2022 A comparison of slope stability assessment techniques using different rock mass classification systems and finite element method (FEM): A case study from the Garhwal Himalayas, India; J. Earth Syst. Sci. 131:242
5. Eswar, M., Chourasia, A. and Gopalakrishnan, N. (2022), ‘Seismic Response Control of Buildings using Shape Memory Alloys as Smart Material: State of the Art Review’, Earthquakes and Structures, 23(2), 207-219. https://doi.org/10.12989/eas.2022.23.2.207 (SCIE, IF – 2.025)
6. Hitesh gaur, Tarun Kumar M, R. Siva Chidambaram and Naveen Kwatra, (2022) “Hysteretic Performance of Precast Beam-Column Joint with Improved Energy Dissipation Capacity Structural Integrity Book Series, Chapter, Springer Proceedings. (Web of Science Indexed)
7. Gaur, H., Moka, V.T.K., Rajendran, S.C. and Kwatra, N., 2022. Hysteretic Performance of Precast Beam-Column Joint with Improved Energy Dissipation Capacity. In International Conference on Advances in Structural Mechanics and Applications (pp. 336-349). Springer, Cham. (Web of Science).
8. Kapoor NR, Kumar A, Kumar A, Kumar A, Mohammed MA, Kumar K, Kadry S, Lim S. Machine learning-based CO2 prediction for office room: a pilot study. Wireless Communications and Mobile Computing. 2022 Mar 7; 2022. https://doi.org/10.1155/2022/9404807 (IF: 2.146)
9. Kelvin Baariu, Moka V.T.K, R Siva Chidambaram, S R Karade., 2022, “A critical Review of the Performance of Precast Structures under different types of loading”, Structural Engineering Digest (SED), Indian Association of Structural Engineers. 12 (1), 102-112.
10. Kothapalli, Naveen Kumar, R. Siva Chidambaram, and Pankaj Agarwal. “Experimental Evaluation of Steel Bracings and Metallic Yield Damper as Retrofit Techniques for Severely Damaged RC Building Frames.” Journal of Earthquake Engineering (2022): 1-24. (SCI-Indexed)
11. Kuchipudi, S.T., Ghosh, D., Yumnam, M., Gupta, H. (2022). “Detection of Debonds in Reinforced Concrete Using Ground Penetrating Radar”. In: Mandayam, S., Sagar, S.P. (eds) Advances in Non-Destructive Evaluation. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-9093-8_18
12. Kuchipudi, S.T., Ghosh. D, Gupta. H, “Automated Assessment of Reinforced Concreteelements using Ground Penetrating Radar”, ‘Automation in Construction’, Elsevier. https://doi.org/10.1016/j.autcon.2022.104378
13. Kuchipudi, S.T., Ghosh. D, (2022) “An ultrasonic wave-based framework for imaging internalcracks in concrete”, Structural Control & Health Monitoring, Wiley. https://doi.org/10.1002/stc.3108
14. Kuchipudi ST, Ghosh D, Gupta H. Automated Assessment of Reinforced Concrete Elements using Ground Penetrating Radar. Automation in Construction. 2022 Aug 1; 140:104378. https://doi.org/10.1016/j.autcon.2022.104378(IF: 10.517)
15. K.V. Naveen Kumar, Chidambaram, R. S and Pankaj Agarwal, (2022), Cyclic Evaluation of Severely Damaged RC Frames Repaired and Strengthened through an FRP-Wrapped Coupler-Box Confinement, ASCE Journal of Composite for Construction. (SCI-Indexed)
16. Mahadev Rokade, Mahesh Gaikwad, Suvir Singh and Sachin Kadam (2022), “A Simplified Regression-based Approach for Concrete Mechanical Properties at Elevated Temperature”, Asian Journal of Civil Engineering. Volume 23 (2022). https://doi.org/10.1007/s42107-022-00469-1
17. Mahesh Gaikwad, Harpal Singh, Suvir Singh (2022), “Fundamental Behaviour of Concrete Constitutive Parameters in the Post-Heating State of Fire”, Structural Fire Safety, Special Issue, Indian Association of Structural Engineers, Vol.12, Issue 4.
18. Mittal V, Samanta M. Closure to “Causes of Failure and Strengthening Measures of a Pile Foundation Supporting Transmission Line Tower. Journal of Performance of Constructed Facilities. 2022 Aug 1;36 (4):07022004. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001592.(IF: 2.372)
19. Moka, V.T.K. and Rajendran, S.C., 2022. Role of coupler in structural behaviour of RC elements. Materials Today: Proceedings. (Best Paper Award – Recipient), (Scopus Indexed).
20. Moka, V.T.K. and Rajendran, S.C., 2022. Experimental investigation on Flexural Behavior of Precast Beam-Beam Connections using Mechanical Connectors. 17^th Symposium on Earthquake Engineering. LNCS. Springer. (Scopus Indexed).
21. Nighot, N. S., & Kumar, R. (2023). A comprehensive study on the synthesis and characterization of eco-cementitious binders using different kind of industrial wastes for sustainable development. Developments in the Built Environment, 14, 100135. https://doi.org/10.1016/j.dibe.2023.100135
22. Nikhil Jadav, R. Siva Chidambaram (2022)   Damage Tolerance Capacity of Exterior Beam Column Joint with HPFRCC, Structural Integrity Book Series, Chapter, Springer Proceedings. (Web of Science Indexed)
23. Rakshana Ponniah, R. Siva Chidambaram (2022)   Flexural Behaviour of RC Beams Strengthened with Textile Reinforced Concrete, Structural Integrity Book Series, Chapter, Springer Proceedings. (Web of Science Indexed)
24. Sharma U, Solanki A, Singh LP. Granulometric effect of silica nanoparticles on hydration kinetics and microstructure of cement-based materials. European Journal of Environmental and Civil Engineering. 2022 May 20:1-3. https://doi.org/10.1080/19648189.2022.2080768 (IF: 2.516)
25. Solanki A, Singh LP, Karade SR, Sharma U. Mineralogy of tricalcium aluminate hydration with silica nanoparticles. Construction and Building Materials. 2022 Jul 18; 340:127707. https://doi.org/10.1016/j.conbuildmat.2022.127707 (IF: 7.693)
26. Waseem, S.A., Roy, A.B., R. Siva Chidambaram and Ghangas, G., (2022) Feasibility of Geo-Grid as confining Reinforcement in RC Columns: An Experimental Investigation, Journal of The Institution of Engineers (India): Series A (SCI-Indexed)
27. Yogesh Yadhav, R. Siva Chidambaram (2022) Performance Evaluation of Retrofitted Exterior Beam Column Joint under Cyclic Loading, Structural Integrity Book Series, Chapter, Springer Proceedings. (Web of Science Indexed)
28. Baariu K, Moka VT, Chidambaram RS, Karade SR. A Critical Review of the Performances of Precast Structure under Different Types of Loading. Structural Engineering Digest Journal, pp. 102-112, Indian Association of Structural Engineers, 2022.
29. Dahiya N, Pandit K, Sarkar S (2022) a comparison of slope stability assessment techniques using different rock mass classification systems and finite element method (FEM): A case study from Garhwal Himalayas, India. J. Earth Syst. Sci.
30. Gaur H, Moka VT, Rajendran SC, Kwatra N. Hysteretic Performance of Precast Beam-Column Joint with Improved Energy Dissipation Capacity. In International Conference on Advances in Structural Mechanics and Applications 2022 (pp. 336-349). Springer, Cham. https://doi.org/10.1007/978-3-030-98335-2_22
31. Kuchipudi ST, Ghosh D, Yumnam M, Gupta H. Detection of Debonds in Reinforced Concrete Using Ground Penetrating Radar. In Advances in Non-Destructive Evaluation 2022 (pp. 219-232). Springer, Singapore. https://doi.org/10.1007/978-981-16-9093-8_18
32. Kumar A, Kapoor NR, Arora HC, Kumar A. Smart Cities: A Step toward Sustainable Development. In Smart Cities 2022 (pp. 1-43). CRC Press.
33. Moka VT, Rajendran SC. Role of coupler in structural behaviour of RC elements. Materials Today: Proceedings. 2022 May 18. https://doi.org/10.1016/j.matpr.2022.05.097
34. Aswathy M S and Vinoth M (2022) Twin tunnelling caused distortions and its effect on a hospital building on mixed ground conditions, International Journal of Geotechnical Engineering, DOI: 10.1080/19386362.2022.2117342. (SJR: 0.57)
35. Baariu K., Tarun kumar MV, Chidambaram RS, Karade SR (2022). A Critical Review of the Performance of Precast Structures under Different Types of Loading. Structural Engineering Digest, 12(1), 102-112.
36. Dahiya, N., Pandit, K. & Sarkar, S. (2022) a comparison of slope stability assessment techniques using different rock mass classification systems and finite element method (FEM): A case study from the Garhwal Himalayas, India. J Earth Syst Sci 131, 242. https://doi.org/10.1007/s12040-022-01988-w
37. Hina Gupta, Debdutta Ghosh, and Achal K. Mittal. “Monitoring of Settlement in Masonry Arch using FBG Sensors.” Journal of Non-Destructive Testing and Evaluation (JNDE) 19, no. 1 (2022): 23-30.
38. Kelvin Baariu, M V Tarun Kumar, R Siva Chidambaram, S R Karade (2022), “A Critical Review of the Performances of Precast Structure under Different Types of Loading”, Structural Engineering Digest Journal, 12(1),102-112, Indian Association of Structural Engineers (National Journal)
39. Kumar, N., Thapliyal, P. C., Kumar, A. & Kumar, A., A mini review on paraffin-graphene and related hybrid phase change materials for building energy applications, Energy Storage, 2022, 1-16.
40. Mayakuntla, Prasanna Kumar, Debdutta Ghosh, and Abhijit Ganguli. “Classification of Corrosion Severity in Concrete Structures Using Ultrasonic Imaging and Linear Discriminant Analysis. “Sustainability 14.23 (2022): 15768. (Impact Factor: 3.7)
41. Rajesh Kumar & Abhishek Srivastava (2022). Influence of lightweight aggregates and Supplementary Cementitious Materials on the properties of Lightweight Aggregate Concrete. Iranian Journal of Science and Technology, Transactions of Civil Engineering, Springer Nature. ISSN: 2228-6160. https://doi.org/10.1007/s40996-022-00935-5 (Impact Factor: 1.461/2021).
42. Sai Teja Kuchipudi, Debdutta Ghosh. “An Ultrasonic wave-based framework for imaging internal cracks in concrete medium” Structural control and health monitoring (2022); 29(12): e3108 https://doi.org/10.1002/stc.3108 (Impact Factor: 6.058)
43. Sai Teja Kuchipudi, Debdutta Ghosh, and Hina Gupta. “Automated Assessment of Reinforced Concrete Elements using Ground Penetrating Radar.” Automation in Construction 140 (2022): 104378. https://doi.org/10.1016/j.autcon.2022.104378 (Impact Factor: 10.517)
44. Satyanarayana K & R. Siva Chidambaram, K V Naveen Kumar (2022), “Influence of FRP on the Shear Behaviour of RC Rectangular Beam Elements (Best Paper Award – Recipient) Materials Today Proceedings, Elsevier (Scopus-Indexed)
45. Siva Chidambaram (2022)” The Diverse Techniques of Precast Connections”, Civil Engineering & Construction Review. March 2022 (National Magazine)
46. Soju J. Alexander; P. Sumathi; S. K. Panigrahi; C. BharathiPriya; and N. Gopalakrishnan, “Evaluation of Embedded Dual-Piezoelectric-Based Transducer with Miniature Impedance Analyzer for Monitoring the Curing of Cement Mortar” IEEE Transactions on Instrumentation and Measurement 72 (2022): 6000910. (IF:5.332)
47. Solanki, A., Sharma, U., Singh, L. P., Karade, S. R. (2022). Mineralogical and micro structural studies of C–S–H exposed to sulphate attack. European Journal of Environmental and Civil Engineering, 1-18. DOI: 10.1080/19648189.2022.2140206
48. Solanki A., Singh L.P., Karade S.R., Sharma U. (2022) Mineralogy of tricalcium aluminate hydration with silica nanoparticles, Construction and Building Materials, 340, 127707, doi.org/10.1016/j.conbuildmat.2022.127707
49. Tamjeed N A & R. Siva Chidambaram (2022) “Shear Strength of Steel Fiber Reinforced Concrete Beam– A Review” Materials Today Proceedings, Elsevier (Scopus-Indexed)
50. Tarun Kumar V M & R. Siva Chidambaram (2022) “Role of Coupler in Structural Behaviour of RC Elements – A Review” (Best Paper Award – Recipient) Materials Today Proceedings, Elsevier (Scopus-Indexed)
51. Vinoth M, Aswathy MS (2022). 3D Evolution of soil arching during shield tunnelling in silty and sandy soils: A comparative study. Int J Numer Anal Methods Geomech. 1-24. https://doi.org/10.1002/nag.3470. (IF: 4.22)
52. Verma et al. (2022) “Reliability Assessment of Tunnels Using Machine Learning Algorithms” in Indian Geotechnical Journal. Springerlink Publication.

Papers Published in Journals

1. Agarwal E, Pain A. Efficient Probabilistic Stability Analysis of Geosynthetic Reinforced Slopes Using Collocation-Based Stochastic Response Surface. International Journal of Geomechanics. 2021 Oct 1:21(10):04021189. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002157. (IF: 3.819)
2. Agarwal E, Pain A. Probabilistic stability analysis of geosynthetic-reinforced slopes under pseudo-static and modified pseudo-dynamic conditions. Geotextiles and Geomembranes. 2021 Dec 1;49(6):1565-84. https://doi.org/10.1016/j.geotexmem.2021.07.005. (IF: 5.292)
3. Agarwal E, Pain A, Sarkar S. Stochastic stability analysis of geosynthetic reinforced slopes subjected to harmonic base shaking. Transportation Geotechnics. 2021 Jul 1;29:100562. https://doi.org/10.1016/j.trgeo.2021.100562. (IF: 3.293)
4. Kapoor NR, Kumar A, Alam T, Kumar A, Kulkarni KS, Blecich P. A review on indoor environment quality of Indian school classrooms. Sustainability. 2021 Oct 27;13(21):11855. https://doi.org/10.3390/su132111855 (IF: 3.889)
5. Kapoor NR, Kumar A, Meena CS, Kumar A, Alam T, Balam NB, Ghosh A. A systematic review on indoor environmental quality in naturally ventilated school classrooms: a way forward. Advances in Civil Engineering. 2021 Feb 18;2021. https://doi.org/10.1155/2021/8851685 (IF: 1.843)
6. Kumar A, Arora HC, Mohammed MA, Kumar K, Nedoma J. An optimized neuro-bee algorithm approach to predict the FRP-concrete bond strength of RC beams. IEEE Access. 2021 Dec 31;10:3790-806. https://doi.org/10.1109/ACCESS.2021.3140046 (IF: 3.476)
7. Mittal V, Samanta M. Causes of Failure and Strengthening Measures of a Pile Foundation Supporting Transmission Line Tower. Journal of Performance of Constructed Facilities. 2021 Aug 1;35(4):04021034. 10.1061/(ASCE)CF.1943-5509.0001592 (IF: 2.372)
8. Solanki A, Singh LP, Karade SR, Sharma U. Functionality of silica nanoparticles on hydration mechanism and microstructure of tricalcium aluminate. Construction and Building Materials. 2021 Sep 13;299:124238. https://doi.org/10.1016/j.conbuildmat.2021.124238. (IF: 7.693)
9. Aman Kumar, Amith K S, Vaishnavi , Ganesh Kumar, “Numerical study on Tunnel-Soil Interaction under dynamic loading conditions, December 2021
10. Amith K S, Ganesh Kumar S “Assessment of Underground Structure- Soil Interaction under Dynamic Conditions through Shaking Table Testing”, 8IYGEC-IIT Madras-September 2021
11. Amith K S, Ganesh Kumar S “Assessment of Underground Structure- Soil Interaction under dynamic conditions”. IGC Trichy -December 2021
12. Mittal V, Samanta M. A Critical Review on Design Philosophies of Different Design Standards on Seismic Soil–Structure Interaction. Seismic Design and Performance. 2021:1-3. https://doi.org/10.1007/978-981-33-4005-3_1
13. Neeraj, Pandit K, Sarkar S (2021) Numerical Analysis for slope stability evaluation in rock fall prone area- A case study from Garhwal Himalayas India. Proceeding of international conference EGCON-2021
14. Stability assessment of a himalayan rock slope: a case study using rock mass classifications, kinematic analysis and numerical techniques in EGCON 2021, the international conference on Recent Advances in Geotechnics.
15. Aman Kumar, Harish Chandra Arora, Mazin Abed Mohammed, Krishna Kumar, Jan Nedoma. An optimized neuro-bee algorithm approach to predict the FRP-concrete bond strength of RC beams. IEEE Access, 2021, 10, 3790-3806. (IF = 3.367)
16. Dheeraj Kumar Singh, Harish Chandra Arora, Rahul Kumar. State of the Art on Relation of Corrosion of Reinforcing Steel with Surface Crack Width in Corroded Reinforced Concrete Structural Elements. International Research Journal of Engineering and Technology, 2021, 8(9), 356-365.
17. Jeeshan Khan and Santha Kumar G., Influence of binary antifreeze admixtures on strength performance of concrete under cold weather conditions, Journal of Building Engineering, 34 (2021) 102055, 1-8. Citation-10. (I.F. 7.09).
18. M Samanta, Abhishek R, VA Sawant (2021) Investigation on Axial Response of Pile Due to Staged Tunneling: A Numerical Approach, Book Chapter, Lecture Notes in Civil Engineering, Vol. 185, pp 267-278, In the book ‘Stability of Slopes and Underground Excavations’ Part of the ‘Lecture Notes in Civil Engineering’ Book Series. Springer, Singapore, https://doi.org/10.1007/978-981-16-5601-9_23.
19. M Samanta and VA Sawant (2021) “Experimental investigation on green field surface settlement in cohesion less medium due to staged tunneling” Innovative Infrastructure Solution, 6(2), 1-13. https://doi.org/10.1007/s41062-021-00475-3, Springer link Publication
20. M Vinoth and Aswathy M.S (2021) “Behaviour of Existing Tunnel Due to Adjacent Deep Excavation- A Review” published in International Journal of Geotechnical Engineering. DOI:10.1080/19386362.2021.1952800. Taylor & Francis Publication. (SJR: 0.57)
21. Rahul Kumar, Harish Chandra Arora, Vikas Prabhakar, Shobha Ram, Dheeraj Kumar Singh. Assessment of residual shear strength of corroded reinforced concrete beams using analytical modeling. i-manager’s Journal on Civil Engineering, 2021, 11(3), 12-22.
22. Solanki A., Singh L.P., Karade S.R., Sharma U. (2021) Functionality of silica nanoparticles on hydration mechanism and microstructure of tricalcium aluminate, Construction and Building Materials, 299, 124238,  doi.org/10.1016/j.conbuildmat.2021.124238.
23. Thapliyal, P. C., Green polymer nanocomposites, Abstracts of International Conferences & Meetings (AICM), 21, 2021.
24. Thapliyal, P. C., Protective Coatings having Renewable Content Contributing towards Sustainability in Buildings, Macromol. Symp., 398, 200086, 2021. (IF: 0.85)
25. A. Badkul, R. Paswan, S. K. Singh, & J. P. Teger (2021), A comprehensive study on the performance of alkali activated fly ash/GGBFS geopolymer concrete pavement” Road Materials and Pavement Design, Taylor and Francis, UK (IF: 3.21) https://doi.org/10.1080/14680629.2021.1926311
26. A.K.Sinha, M. Vinoth, V. G. Havanagi and S. Chandra (2021), Potential Investigation of Stabilised Fuming Furnace Slag for Road Construction, The Journal of Solid Waste Technology and Management, SJR 0.18 (Q4)
27. A. Tripathi, N. Gupta, A. K. Singh, S. P. Mohanty, N. Rai, A. Pain, (2021). “Effects of Elevated Temperatures on the Micro structural, Physico-Mechanical and Elastic Properties of Barakar Sandstone: A Study from One of the World’s Largest Underground Coalmine Fire Region, Jharia, India”, Rock Mechanics and Rock Engineering, Springer, 54, 1293–1314. [DOI: 10.1007/s00603-020-02315-9] (IF: 6.730/2020)
28. Agarwal, N., Meena, C.S., Raj, B.P., Saini, L., Kumar, A., Gopalakrishnan, N., Kumar, A., Balam, N.B., Alam, T., Kapoor, N.R., Aggarwal, V., 2021. Indoor Air Quality Improvement in COVID-19 Pandemic: Review. Sustainable Cities and Society, Vol. 70, 102942. DOI: https://doi.org/10.1016/j.scs.2021.102942 [Impact Factor: 7.587]
29. Alam, T., Meena, C.S., Balam, N.B., Kumar, A., Cozzolino, R., 2021.Thermo-Hydraulic Performance Characteristics and Optimization of Protrusion Rib Roughness in Solar Air Heater. Energies, Vol. 14, pp. 3159. DOI: https://doi.org/10.3390/en14113159 [Impact Factor: 3.004]
30. Aman Kumar, Harish Chandra Arora, Mazin Abed Mohammed, Krishna Kumar, Jan Nedoma. An optimized neuro-bee algorithm approach to predict the FRP-concrete bond strength of RC beams. IEEE Access, 2021, 10, 3790-3806. (IF = 3.367)
31. Aravind Kumar. A, Rajiv Kumar (2021), Ansari A. A and Rakesh Kumar, Experimental and numerical simulation studies of liquefied petroleum gas fire in a full–scale compartment, Process Safety progress, AICHE, Wiley (IF:1.334)
32. Aravind Kumar. A, Rajiv Kumar, Ansari A. A and Rakesh Kumar (2021), Non-isothermal Degradation Analysis of Plywood and Determination of Kinetic Parameters Using Coats–Redfern Method, Journal of Institution of Engineers India Series: E, Springer (IF:0.976) Jun, 2021.
33. Aravind Kumar. A, Rajiv Kumar and Ansari A. A (2021), Room Corner Fire Growth Studies of plywood Lining Material Under Fully Ventilated Condition, Journal of Institution of Engineers India Series: A, Springer (IF:0.507), Vol.102, 2021, pp.545-551.
34. Aswathy M.S, M Vinoth and Achal Mittal (2021) “Impact of Governing Factors on Prediction of Tunneling Induced Surface Settlement in Young Alluvium Deposit” published in Indian Geotechnical Journal. Springer link Publication. (SJR: 0.39)
35. Banti A. Gedam (2021), Fire resistance design method for reinforced concrete beams to evaluate fire-resistance rating, Structures, Vol. 33, October 2021, PP. 855-877 (IF2.983).
36. Banti A. Gedam “Fire resistance design method for reinforced concrete beams to evaluate fire-resistance rating.” Structures, (2021),33, 855-877. (SCI). DOI: https://doi.org/10.1016/j.istruc.2021.04.046
37. Charu Gupta, R. Siva Chidambaram and A.B. Danie Roy (2021) Shear Resistance Behavior of Exterior Beam-Column Joint with Steel Fiber Reinforced Concrete Adv. Struct. Mechanics Appln. (ASMA), 77,2021Springer Proceedings.
38. Dheeraj Kumar Singh, Harish Chandra Arora, Rahul Kumar. State of the Art on Relation of Corrosion of Reinforcing Steel with Surface Crack Width in Corroded Reinforced Concrete Structural Elements. International Research Journal of Engineering and Technology, 2021, 8(9), 356-365.
39. E. Agarwal, A. Pain, (2021). “Probabilistic stability analysis of geosynthetic-reinforced slopes under pseudo-static and modified pseudo-dynamic conditions”, Geotextiles and Geomembranes, Elsevier (available online with DOI: 10.1016/j.geotexmem.2021.07.005) (IF: 5.292/2020).
40. E. Agarwal, A Pain, (2021). “An efficient probabilistic stability analysis of geosynthetic reinforced slopes using collocation based Stochastic Response Surface”, International Journal of Geomechanics, ASCE, 21(10) (DOI:10.1061/(ASCE)GM.1943-5622.0002157) (IF: 3.819/2020).
41. E. Agarwal, A. Pain, S. Sarkar, (2021). “Stochastic stability analysis of geosynthetic reinforced slopes subjected to harmonic base shaking”, Transportation Geotechnics. Elsevier, 29, 100562 (IF: 3.293/2020). (DOI: 10.1016/j.trgeo.2021.100562).
42. E. Agarwal, A. Pain, T. Mukhopadhyay, S. Metya, S. Sarkar, (2021). “Efficient computational system reliability analysis of reinforced soil retaining structures under seismic conditions including the effect of simulated noise”, Engineering with Computers, Springer, (IF: 7.963/2020). (DOI: 10.1007/s00366-020-01281-8)
43. F. P. Omowuni, E. Agarwal, A. Pain, R. K. Dash, D. P. Kanungo, (2021). “A data driven efficient framework for the probabilistic slope stability analysis of Pakhi landslide, Garhwal Himalaya”, Journal of Earth System Science, Springer, (accepted for publication) (IF: 1.371/2020).
44. Falae, P.O., Dash, R.K., Kanungo, D.P. & Chauhan, P.K.S. (2021), Interpretation on water seepage and degree of weathering in a landslide based on pre‐ and post–monsoon electrical resistivity tomography, Near Surface Geophysics, DOI: 10.1002/nsg.12142, IF: 1.186
45. Falae, P.O., Dash, R.K., Samanta, M. &Kanungo, D.P. (2021), Geo‐Integrated Assessment of Landslide Zone around Gadora along NH 58 of Garhwal Himalayas, India, Near Surface Geophysics, DOI: 10.1002/nsg.12151, IF: 1.186
46. Hitesh gaur, Tarun Kumar M, R. Siva Chidambaram and Naveen Kwatra (2021) Hysteretic Performance of Precast Beam-Column Joint with Improved Energy Dissipation Capacity, Adv. Struct. Mechanics Appln. (ASMA), 79,2021, Springer Proceedings.
47. Jeeshan Khan and Santha Kumar G. (2021), Influence of binary antifreeze admixtures on strength performance of concrete under cold weather conditions, Journal of Building Engineering, 34 (2021) 102055, 1-8. (I.F. 3.379). DOI: 10.1016/j.jobe.2020.102055
48. Kapoor, N.R., Kumar, A., Meena, C.S., Kumar, A., Alam, T., Balam, N.B., Ghosh, A., 2021. A Systematic Review on Indoor Environment Quality in Naturally Ventilated School Classrooms: A Way Forward. Advances in Civil Engineering, Article ID 8851685. DOI: https://doi.org/10.1155/2021/8851685 [Impact Factor: 1.924 (2020)]
49. Kumar, R. (2021). Effects of high-volume dolomite sludge on the properties of eco-efficient lightweight concrete: Microstructure, statistical modeling, multi-attribute optimization through derringer’s desirability function, and life cycle assessment. Journal of Cleaner Production, 307, 127107. https://doi.org/10.1016/j.jclepro.2021.127107 (IF:9.297/2020/Q1).
50. Meena, C.S., Raj, B.P., Saini, L., Agarwal, N., Ghosh, A., 2021. Performance Optimization of Solar-Assisted Heat Pump System for Water Heating Applications. Energies, Vol.14, pp. 3534. DOI: https://doi.org/10.3390/en14123534 [Impact Factor: 3.004]
51. M. S. Aswathy, M. Vinoth and Achal Mittal (2021), Impact of Governing Factors on Prediction of Tunneling Induced Surface Settlement in Young Alluvium Deposit, The Journal of Solid Waste Technology and Management, SJR 0.18 (Q4), Indian Geotechnical Journal, ESCI SJR 0.46 (Q2)
52. M. Samanta and V A Sawant (2021), ‘Experimental investigation on Greenfield surface settlement in cohesionless medium due to staged tunneling’ Innovative Infrastructure Solutions, Springer Publication. 6, 106, https://doi.org/10.1007/s41062-021-00475-3\
53. M. Vinoth and M. S. Aswathy (2021), Behaviour of Existing Tunnel Due to Adjacent Deep Excavation- A Review, International Journal of Geotechnical Engineering, SJR 0.585 (Q2) 21 Jul 2021
54. M Vinoth and Aswathy M.S (2021) “Behaviour of Existing Tunnel Due to Adjacent Deep Excavation- A Review” published in International Journal of Geotechnical Engineering. DOI: 10.1080/19386362.2021.1952800. Taylor & Francis Publication. (SJR: 0.57)
55. Nikhil Jadav, R. Siva Chidambaram (2021) Damage Tolerance Capacity of Exterior Beam Column Joint with HPFRCC, Adv. Struct. Mechanics Appln. (ASMA), 78, 2021 Springer Proceedings. (accepted)
56. Nishant Raj Kapoor, Ashok Kumar, Chandan Swaroop Meena, Anuj Kumar, Tabish Alam, Nagesh B Balam, &Aritra Ghosh., A systematic review on Indoor Environmental Quality in naturally ventilated school classrooms: A Way Forward., Feb. 2021. Advances in Civil Engineering, (SCI) Hindawi, Impact Factor 1.924
57. Padmanabhan, G., and Shanmugam, G. K. (2021). “Liquefaction and reliquefaction resistance of saturated sand deposits treated with sand compaction piles. Bulletin of Earthquake engineering (https://doi.org/10.1007/s10518-021-01143-8)(SCI, Impact factor 3.827 Q1)
58. Pandit, K., Singh, M., Sharma, S. et al. (2021), Back-Analysis of a Debris Slope through Numerical Methods and Field Observations of Slope Displacements. Indian GeotechJ.https://doi.org/10.1007/s40098-021-00553-4
59. P. O. Falae, R. K. Dash, M. Samanta and D.P. Kanungo (2021), Geo-integrated assessment of the landslide zone around Gadora along NH-58 of the Garhwal Himalayas, India’ Near Surface Geophysics, Wiley Publication, 19(2), pp: 183 -198, https://doi.org/10.1002/nsg.12151
60. Rahul Kumar, Harish Chandra Arora, Vikas Prabhakar, Shobha Ram, Dheeraj Kumar Singh. Assessment of residual shear strength of corroded reinforced concrete beams using analytical modeling. i-manager’s Journal on Civil Engineering, 2021, 11(3), 12-22.
61. Raj, B.P., Meena, C.S., Agarwal, N., Saini, L., Khahro, S.H., Subramaniam, U., Ghosh, A. 2021. A review on numerical approach to achieve building energy efficiency for Energy, Economy, and Environment (3E) benefit. Energies, Vol. 14, pp. 4487. DOI: https://doi.org/10.3390/en14154487 [Impact Factor: 3.004]
62. Rajesh Kumar, Rajni Lakhani and Ashok Kumar, “Physico-mechanical and thermal properties of Lightweight Structural Concrete with Light expanded clay aggregate for Energy Efficient Buildings”. Lecture Notes in Civil Engineering, Springer, ISSN: 2366-2557 (Scopus indexed) (accepted on 23.04.2021).
63. Rajesh Kumar (2021), Effects of high-volume dolomite sludge on the properties of eco-efficient lightweight concrete: Microstructure, statistical modeling, multi-attribute optimization through derringer’s desirability function, and life cycle assessment.” Journal of Cleaner Production, Elsevier, 307, 127107. https:/ /doi.org/10.1016/j.jclepro.2021.127107 (Impact Factor:9.297/2020/Q1).
64. Rakesh Kumar. S, Ansari. A. A and Aravind Kumar. A (2021), Fire Safe Interior Surface Finishes, AMC Indian Journal of Civil Engineering, Vol.4(1),2021, pp.29-33.
65. Rakshana Ponniah, R. Siva Chidambaram (2021) Flexural Behavior of RC Beams Strengthened with Textile Reinforced Concrete, Adv. Struct. Mechanics Appln. (ASMA), 101, 2021 Springer Proceedings. (accepted)
66. Rosaliya K., Kulkarni Kishor S, Prasanna V. R, C. S. Meena, Ashok K., Raffaello C., (2021). Estimation of carbon footprint of residential building in warm humid climate of India through BIM, Energies, 14(14), 4237. (SCI, Impact Factor-3.004).
67. Rosaliya K., Kulkarni Kishor Sitaram, Prasanna V. R, C. S. Meena, Ashok Kumar., Raffaello C., Estimation of carbon footprint of residential building in warm humid climate of India through BIM, Feb. 2021, Energies (SCI, IF-3.004), Vol. No. Issue 14(14), Page 4237.
68. Rosaliya K., Kulkarni Kishor S, Prasanna V. R, C. S. Meena, Ashok K., Raffaello C., (2021). Estimation of carbon footprint of residential building in warm humid climate of India through BIM, Energies, 14(14), 4237. (SCI, Impact Factor-3.004).
69. Saini, L., Meena, C.S., Raj, B.P., Agarwal, N., Kumar, A., 2021. Net Zero Energy Consumption Building in India: An Overview and Initiative towards Sustainable Future. International Journal of Green Energy. Taylor and Francis. DOI: https://doi.org/10.1080/15435075.2021.1948417 [Impact Factor: 2.459]
70. Santha Kumar G and Aman Kumar (2021), Influence of granite fine powder on the performance of cellular light weight concrete, Journal of Building Engineering, Elsevier 40, 102707 (Impact factor: 5.318) (Q1)
71. Sarkar, S., Pandit, K., Dahiya, N. et al. (2021), Quantified landslide hazard assessment based on finite element slope stability analysis for Uttarkashi–Gangnani Highway in Indian Himalayas. Nat Hazards 106, 1895–1914, https://doi.org/10.1007/s11069-021-04518-xhttps://doi.org/10.1007/s11069-021-04518-x]
72. Song, Z., Liu, J., Bai, Y., Shi, X., Kanungo, D.P., Qi, C. & Bu, F. (2021), Investigation of Temperature Effect on Strength Properties of Polyurethane-Treated Sand, Journal of Materials in Civil Engineering, 33(3):04020482, DOI: 10.1061/ (ASCE)MT. 1943-5533.0003557, IF: 1.984
73. Srivastava A., Kumar R. & Lakhani R. (2021). “Low energy Eco-cementitious binders as an alternative to ordinary Portland cement: A sustainable viable solution for the modern cement industries” in ‘Smart Materials, Technologies, and Devices: Applications of Industry 4.0’ published by Springer (In Press).
74. Tabish Alam, Chandan Swaroop Meena, Nagesh Babu Balam, Ashok Kumar, and RaffaelloCozzolino., Thermo-Hydraulic Performance Characteristics and Optimization of Protrusion Rib Roughness in Solar Air Heater., March 2021, Energies, (Impact Factor: 3.004). Vol. No. 14, Page 3159.
75. T Alam, CS Meena, NB Balam, A Kumar, R Cozzolino (2021), Thermo-Hydraulic Performance Characteristics and Optimization of Protrusion Rib Roughness in Solar Air Heater” Energies, Vol 14 (11) pp. 3159, 10.3390/en14113159
76. V. Mittal and M. Samanta (2021), Causes of Failure and Strengthening Measure of a Pile Foundation Supporting Transmission Line Tower’ Journal of Performance of Constructed Facilites, ASCE, 35(4), https://doi.org/10.1061/(ASCE)CF.1943-5509.0001592
77. V. S. Ramakrishna Annapareddy, A. Pain, (2021). “Finite Element Modeling (FEM) vs Simplified Force-based Methods for Rigid Retaining Walls Under Earthquake Excitation”, Journal of Earthquake and Tsunami, World Scientific Publishing Company, (IF: 1.483/2020) (DOI: 10.1142/S1793431121500202)
78. Yogesh Yadhav, R. Siva Chidambaram (2021) Performance Evaluation of Retrofitted Exterior Beam Column Joint under Cyclic Loading, Adv. Struct. Mechanics Appln. (ASMA), 78 ,2021 Springer Proceedings.

Papers Published in Journals

1. Aggarwal, V., Meena, C.S., Kumar, A., Alam, T., Kumar, A., Ghosh, A., Ghosh, A., 2020. Potential and Future Prospects of Geothermal Energy in Space Conditioning of Buildings: India and Worldwide Review. Sustainability, Vol. 12, pp. 8428. DOI: https://doi.org/10.3390/su12208428 [Impact Factor: 3.251]
2. Anshul Gaur, Abhishek Singh, Anuj Kumar, Ashok Kumar & Kamal Kapoor., Video Flame and Smoke Based Fire Detection Algorithms: A Literature Review, July 2020, Fire Technology (Impact Factor: 1. 42), Volume 56, Issue 5 pp. 1943-1980
3. Anurag Verma, Surya Prakash & Anuj Kumar (2020), A Comparative Analysis of Data-Driven Based Optimization Models for Energy-Efficient Buildings, IETE JOURNAL OF RESEARCH,” 05 Nov 2020 Art No O4. , Article No. ,44136, 2020
4. Anurag Verma, Surya Prakash & Anuj Kumar (2020), ANN-based energy consumption prediction model up to 2050 for a residential building: Towards sustainable decision making, Environmental Progress & Sustainable Energy, 19 October 2020, https://doi.org/10.1002/ep.13544
5. Aravind Kumar. A, Rajiv Kumar, Ansari A. A and Rakesh Kumar, Quasi steady state Liquefied gas pool fire in a full-scale compartment, Advances in Thermodynamics and Heat Transfer, Vol.5, 2020, pp.102-107.
6. Chidambaram, R. S., & Agarwal, P. (2020) Seismic Resistant Behaviour of Exterior beam-column joint with Fiber Hybridization. The Indian Concrete Journal ,94(10),20-30.
7. G. Kumar and M. Samanta (2020), Experiemntalevaluation of stress concentration ratio of soft soilreinforcedwith stone column’ Innovative Infrastructure Solutions, Springer Publication. 5,18, https:// doi.org/ 10.1007/ s41062-020-0264-6
8. Gandhi, M.; Ashok Kumar, Elangovan, R.; Meena, C.S.; Kulkarni, K.S.; Kumar, A.; Bhanot, G.; Kapoor, N.R, A Review on Shape-Stabilized Phase Change Materials for Latent Energy Storage in Buildings, October 2020, Sustainability (SCI, IF-3.473), Vol. No. issue 12 (22), Page 9481
9. Gandhi, M., Kumar, A., Rajasekar, E., Meena, C.S., Kulkarni, K.S., Kumar, A., Bhanot, G., Kapoor, N.R., 2020. A Review on Shape-Stabilized Phase Change Materials for Latent Energy Storage in Buildings. Sustainability, Vol. 12, pp. 9481. DOI: https://doi.org/10.3390/su12229481 [Impact Factor: 3.251]
10. Goyal, A., & Karade, S. R. (2020). Efficiency of cathodic prevention to control corrosion in seawater mixed concrete. Journal of Building Pathology and Rehabilitation, 5(1), 1-11.
11. Goyal, A., & Karade, S. R. (2020). Steel Corrosion and Control in Concrete Made with Seawater. Innovations in Corrosion and Materials Science, 10(1), 58-67.
12. Khan J S and Santha Kumar G (2020), Influence of binary antifreeze admixtures on strength performance of concrete under cold weather conditions. Journal of Building Engineering, Elsevier, 102055 (Impact factor: 5.318), (Q1)
13. Kumar, G. S., Saini, P. K., & Karade, S. R. (2020). Impact of Mixing Approaches on Properties of Recycled Aggregate Mortar. ACI Materials Journal, 117(6), 201-214.
14. Kurian, R.; Kulkarni, K.S.; Ramani, P.V.; Meena, C.S.; Kumar, A. 2021. Cozzolino, R. Estimation of Carbon Footprint of Residential Building in Warm Humid Climate of India through BIM. Energies, Vol. 14, pp. 4237. DOI: https://doi.org/10.3390/en14144237 [Impact Factor: 3.004]
15. M Zaid, MR Sadique, M Samanta (2020), Effect of unconfined compressive strength of rock on dynamic response of shallow unlined tunnel’ SN Applied Science, Springer link Publication, 2, 2131, https://doi.org/10.1007/s42452-020-03876-8
16. M Zaid, MR Sadique, M.M. Alam, M Samanta (2020), Effect of shear zone on dynamic behaviour of rock tunnel constructed in highly weathered granite’Geomechanics and Engineering: An International Journal, Techno Press Publication, 23(3), pp. 245-259, http://dx.doi.org/10.12989/gae.2020.23.3.24
17. P. Punetha and M. Samanta (2020), Modelling of shearbehaviour of interfaces involvingsmoothgeomembrane and nonwovengeoetxtileunderdynamic and staticloading conditions’ ; Geotechnical and Geological Enginnering. Springer Publication, 38:6313–6327, https://doi.org/10.1007/s10706-020-01437-9
18. Rakesh Kumar. S, Ansari. A. A. and Aravind Kumar. A (2020), Grooved Building blocks for concealed utility services, AMC Indian Journal of Civil Engineering, Vol.3(2),2020, pp.7-12.
19. Rakesh Kumar. S, Ansari. A. A and Aravind Kumar. A, Grooved Building blocks for concealed utility services, AMC Indian Journal of Civil Engineering, Vol.3(2), 2020, pp.7-12.
20. SayantaniLala, Kshitij Jain, Ashok Kumar, E. Rajasekar, Kishor S. Kulkarni. Design Aids for Supplementary Lighting Design in India., September 2020, Journal of The Institution of Engineers (India). (Impact Factor: 0.390). Vol. No. 101(4), Page 643-656.
21. S. K. Singh, Ashok Kumar, Sara Ali, SayantaniLala. Investigating the Application of Passive Cooling Strategies in Hot-Dry Climate for Energy Efficient Affordable Housing: Case Study, Dec. 2020, Optimization in Building Design, Annual Technical Volume 2020, Architectural Engineering Division Board, The Institution of Engineers, 2020.
22. Srinivasaraonaik B, L.P. Singh, S. Shina, I. Tyagi, A. Rawat (2020), Studies on the mechanical properties and thermal behavior of microencapsulated eutectic mixture in gypsum composite board for thermal regulation in the buildings, Journal of Building Engineering 31 (2020) 101400 (I.F.:5.01)
23. Srinivasaraonaik B, L.P. Singh, S. Sinha, I. Tyagi, & G. Mittal (2020), “Studies on thermal properties of microencapsulated eutectic phase change material incorporated different mortar mixes”, International Journal of Energy Research 45, 2488-2497 (I.F-3.7).
24. Tabish Alam, Ashok Kumar, Nagesh B. Balam, Thermo-Hydraulic Performance of Solar Air Heater Duct Provided with Conical Protrusion Rib Roughnesses (Chapter no. 16), 2020, Advances in Energy Research, Vol. 2, pp. 159-168, Springer
25. Verma, A; Prakash, S; Kumar (2020), A, AI-based Building Management and Information System with Multi-agent Topology for an Energy-efficient Building: Towards Occupants Comfort, IETE Journal of Research, https:// doi.org/ 10.1080/ 03772063.2020.1847701 , 23 Nov 2020
26. Vivek Agarwal, Chandan Swaroop Meena, Ashok Kumar, Tabish Alam, Anuj Kumar, Arijit Ghosh, & Aritra Ghosh., Potential and Future Prospects of Geothermal Energy in Space Conditioning of Buildings: India and Worldwide Review, Oct. 2020, Sustainability, (SCI, IF-3.473), Impact Factor 2.576
27. Goyal and S.R. Karade, “Steel Corrosion and Control in Concrete made with Seawater”, Innovations in Corrosion and Materials Science, Volume 10, Issue 1, 2020, pp. 58-67, DOI : 10.2174/ 2352094909666191121104836.
28. Singh, S. Maiti, S. Rani, H. Raj, R.S. Bisht, S.K. Panigrahi, and I. Tyagi, “Ti Doped BaMnO3 Perovskite Structure as Photocatalytic Agent for the Degradation of Noxious Air and Water Pollutants”, SN Applied Sciences, Vol. 2, Issue 2, February 2020, Article 310, DOI: 10.1007/s42452-020-2121-9.
29. Wang, J. Liu, J. Chen, F. Bu, Y. Bai, D.P. Kanungo, Z. Song, and C. Qi, “Experimental Study on Compressibility and Rebound Characteristics of Sand Reinforced with Polymer and Fiber”, Journal of Natural Fibers, February 10, 2020 (online), DOI: 10.1080/15440478.2020.1726251.
30. Sangeeta, B.K. Maheshwari and D.P. Kanungo, “GIS Based Pre- and Post-Earthquake Landslide Susceptibility Zonation with Reference to 1999 Chamoli Earthquake”, Journal of Earth System Science, Vol. 129, January 2020, Article 55, pp. 1-20, DOI: 10.1007/s12040-019-1319-y.

Papers Published in International Journals

1. Chourasia, S. Singhal and J. Parashar, “Experimental Investigation of Seismic Strengthening Technique for Confined Masonry Buildings”, Journal of Building Engineering, Vol. 25, September 2019, Article 100834, DOI: 10.1016/j.jobe.2019.100834.
2. Gaur, A. Singh, A. Kumar, K.S. Kulkarni, S. Lala, K. Kapoor, V. Srivastava, A. Kumar and S.C. Mukhopadhyay, “Fire Sensing Technologies: A Review”, IEEE Sensors Journal, Vol. 19, No. 9, May 2019, pp. 3191-3202, DOI: 10.1109/JSEN.2019.2894665. (Impact Factor: 3.076)
3. Verma, S. Prakash, V. Srivastava, A. Kumar, and S.C. Mukhopadhyay, “Sensing, Controlling, and IoT Infrastructure in Smart Building: A Review”, IEEE Sensors Journal, Vol. 19, No. 20, October 15, 2019, pp. 9036-9046, DOI: 10.1109/JSEN.2019.2922409.
4. B.A. Gedam, “Time-Dependent Behaviour Prediction of the Prestressed HPC I-Girder, Engineering Structures”, Engineering Structures, Vol. 201, December 15, 2019, Article 109763, DOI: 10.1016/j.engstruct.2019.109763.
5. Chauhan, G.J. Joshi and P. Parida, “Car following Model for Urban Signalized Intersection to Estimate Speed Based Vehicle Exhaust Emissions”, Urban Climate, ScienceDirect, Elsevier, Vol. 29, September 2019, Article 100480, DOI: 10.1016/j.uclim.2019.100480.
6. G.S. Kumar, “Influence of Fluidity on Mechanical and Permeation Performances of Recycled Aggregate Mortar”, Construction and Building Materials, Elsevier, Vol. 213, July 20, 2019, pp. 404-412, DOI: 10.1016/j.conbuildmat.2019.04.093. (Impact Factor 4.01)
7. G.S. Kumar, P.K. Saini, S.R. Karade and A.K. Minocha, “Chemico-Thermal Treatment for Quality Enhancement of Recycled Concrete Fine Aggregates”, Journal of Material, Cycles and Waste Management, Springer, Vol. 21, Issue 5, September 2019, pp. 1197–1210, DOI: 10.1007/s10163-019-00874-w. (Impact Factor: 2.01)
8. Liu, Z. Song, Y. Lu, Y. Bai, W. Qian, D.P. Kanungo, Z. Chen and Y. Wang, “Monitoring of Vertical Deformation Response to Water Draining–Recharging Conditions using BOFDA- Based Distributed Optical Fiber Sensors”, Environmental Earth Sciences, Vol. 78, Issue 14, July 2019, Article 406, pp. 1-11, DOI: 10.1007/s12665-019-8409-7 .
9. Behera, A.K. Minocha and S.K. Bhattacharyya, “Flow Behavior, Microstructure, Strength and Shrinkage Properties of Self-Compacting Concrete Incorporating Recycled Fine Aggregate”, Construction and Building Materials, Vol. 228, December 20, 2019, Article 116819, DOI: 10.1016/j.conbuildmat.2019.116819.
10. M.K. Singh, R. Ooka, H.B. Rijal, S. Kumar, A. Kumar and S. Mahapatra, “Progress in Thermal Comfort Studies in Classrooms Over Last 50 Years and Way Forward”, Energy and Buildings, Vol. 188–189, April 1, 2019, pp. 149-174, DOI: 10.1016/j.enbuild.2019.01.051.
11. N.B. Balam and A. Gupta, “A Fourth Order Accurate Finite Difference Method to Evaluate the True Transient Behaviour of Natural Convection Flow in Enclosures”, International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 30, Issue 3, October 12, 2019, pp. 1233-1290, DOI: 10.1108/HFF-06-2019-0519.
12. Vashistha, S.K. Singh, D. Dutt and V. Kumar, “Sustainable Utilization of Paper Mill Solid Wastes via Synthesis of Nanosilica for Production of Belite Based Clinker”, Journal of Cleaner Production, Vol. 224, July 1, 2019, pp. 557-565, DOI: 10.1016/j.jclepro.2019.03.207.
13. Vashistha, S.K. Singh, D. Dutt and V. Kumar, “Synthesis of Nanosilica from Fly Ash and its Utilization with Lime Sludge in Concrete: an Environmentally Friendly and Sustainable Solution”, Clean Technologies and Environmental Policy, Vol. 21, Issue 9, November 2019, pp. 841–1853, DOI: 10.1007/s10098-019-01753-6.
14. Vashistha, V. Kumar, S.K. Singh, D. Dutt, G. Tomar and P. Yadav, “Valorisation of Paper Mill Lime Sludge via Application in Building Construction Materials: A Review”, Construction and Building Materials, Vol. 211, June 30, 2019, pp. 371-382, DOI: 10.1016/j.conbuildmat.2019.03.085.
15. Hou, Z. Guo, Q. Li, X. Zhang, J. Liu, S. Yang, X. Cheng, R. Kumar, B. Srinivasaraonaik and L.P. Singh, “Comparison Study on the Sulfate Attack Resistivity of Cement-Based Materials Modified with nanoSiO2 and Normal SCMs: Pore Structure and Phase Composition”,Construction and Building Materials, Vol. 228, December 20, 2019, Article 116764, DOI: 10.1016/j.conbuildmat.2019.116764.
16. P.O. Falae, D.P. Kanungo, P.K.S. Chauhan and R.K. Dash, “Electrical Resistivity Tomography (ERT) based Subsurface Characterisation of Pakhi Landslide, Garhwal Himalayas, India”, Environmental Earth Sciences, Vol. 78, Issue 14, July 2019, Article 430, pp. 1-18, DOI: 10.1007/s12665-019-8430-x.
17. P.S. Yadav, P.K. Yadav, K.P. Yadav and S.K. Bharti, “A Hybrid Method to Augment the Efficiency of Distributed Computing System by DAG – Using Finest Task Allocation with Dual Mode Processor”, International Journal of Innovative Technology and Engineering , Vol. 8, Issue 11, September 2019, pp. 4275-4284, DOI: 10.35940/ijitee.K1974.0981119.
18. P.S. Yadav, P.K. Yadav and K.P. Yadav, “A Nobel Approach for Scheduling of Task Graph to Reduce the overall Make-Span”, International Journal of Engineering and Advance Technology, Vol. 8, Issue 5, June 2019, pp. 961-968.
19. R.S. Chidambaram and P. Agarwal, “Flexural Behavior of Reinforced Concrete Beams with HPFRCC”, Journal of Central South University, Vol. 26, Issue 9, September 2019, pp. 2609−2622, DOI: 10.1007/s11771-019-4198-0.
20. S.K. Kirthika, M. Surya and S.K. Singh, “Effect of Clay in Alternative Fine Aggregates on Performance of Concrete”, Construction and Building Materials, Vol. 228, December 20, 2019, Article 11681, DOI: 10.1016/j.conbuildmat.2019.116811.
21. Nimbalkar, A. Pain, S.M. Ahmad and Q. Chen, “Stability Assessment of Earth Retaining Structures under Static and Seismic Conditions”, Infrastructures, Vol. 4, Issue 2, June 2019, pp. 1-15, DOI: 10.3390/infrastructures4020015.
22. Singhal, A. Chourasia, S. Challapa and J. Parashar, “Precast Reinforced Concrete Shear Walls: State of the Art Review”, Structural Concrete, Vol. 20, No. 3, June 2019, pp. 886-898, DOI: 10.1002/suco.201800129.
23. Jami, S.R. Karade and L.P. Singh, “A Review of the Properties of Hemp Concrete for Green Building Applications”, Journal of Cleaner Production, Vol. 239, December 1, 2019, Article 117852, DOI: 10.1016/j.jclepro.2019.117852.
24. Sharma, L.P. Singh, D. Ali and C. Poon, “Effect of Particle Size of Silica Nanoparticles on Hydration Reactivity and Microstructure of CSH Gel”, Advances in Civil Engineering Materials, Vol. 8, Issue 3, November 2019, pp. 346-360, DOI: 10.1520/ACEM20190007.
25. V.S. R. Annapareddy and A. Pain, “Effect of Strain-Dependent Dynamic Properties of Backfill and Foundation Soil on the External Stability of Geosynthetic Reinforced Waterfront Retaining Structure Subjected to Harmonic Motion”, Applied Ocean Research, Elsevier, Vol. 91, October 2019, Article 101899, DOI: 10.1016/j.apor.2019.101899.
26. Bai, J. Liu, Z. Song, Z. Chen, C. Jiang, X. Lan, X. Shi, F. Bu and D.P. Kanungo, “Unconfined Compressive Properties of Composite Sand Stabilized with Organic Polymers and Natural Fibers”, Polymers, Vol. 11, Issue 10, October 2019, Article 1576, pp. 1-17, DOI: 10.3390/polym11101576.

Papers Published in National Journal

1. A. Chourasia, J. Parashar and S. Singhal, “Confined Masonry Construction for India: A Techno Economical Solution for Improved Seismic Behaviour”, Current Science, Vol. 117, No. 7, October 10, 2019, pp. 1174-1183, DOI: 10.18520/cs/v117/i7/1174-1183.
2. A. Chourasia and S. Gupta, “Influential Parameters for Headed Bars in RC Beam-Column Joint”, Current Science, Vol. 16, No. 10, May 25, 2019, pp. 1666-1673, DOI: 10.18520/cs/v116/i10/1666-1673.
3. A. Chourasia and S. Singhal, “Perforated Plastic Cement Bags as Retrofit Material for Masonry Building”, Nirman Sarika, A Newsletter of BMTPC, Vol. 8, Issue 3, July-September 2019, pp 31-35.
4. A. Pain, A.V.S Ramakrishna and S. Sarkar, “Seismic Stability Analysis Of Municipal Solid Waste Landfills using Strain Dependent Dynamic Properties”, Indian Geotechnical Journal, Springer, Vol. 49, No. 2, April 2019, pp. 204-215, DOI: 10.1007/s40098-018-0314-6.
5. K. S. Kulkarni, S. Lala, K. Jain and A. Kumar, “Technologies Transforming Waste to Wealth for Construction Sector: An Overview”, Nirman Sarika, A Newsletter of BMTPC, Vol. 8, Issue 3, July-September 2019, pp. 7-11.
6. R. Tiwari, K. Puntambekar and P. Parida, “Study of Gender Preference to Parameters of Public Transport Evaluation—A Case of Bhopal, Nagarlok”, Quarterly Journal of Urban Affairs, Vol. LII, Part 1, pp. 48-56, Centre for Urban Studies Indian Institute of Public Administration.
7. R. S. Chidambaram and P. Agarwal, “Shear Resistance Behavior of Geo-grid Confined RC Elements under Static and Cyclic Loading”, Current Science, Vol. 117, Issue 2, July 25, 2019, pp. 260-271, DOI: 10.18520/cs/v117/i2/260-271.
8. Siddharth, M. Singh, S. Maiti, R.S. Bisht, S.K. Panigrahi and Sameer, “Investigation of Low Frequency Sound Absorption Property of Fluorogypsum Material for Indoor Applications”, The Journal of Acoustical Society of India, Vol. 46, No. 2, April 2019, pp. 78-86.
9. S.K. Singh and S.K. Kirthika, “Effect of Elevated Temperatures on High Strength Concrete- A Review”, The Indian Concrete Journal, Vol. 93, No. 10, October 2019, pp. 53-65.
10. S.K. Kirthika, S.K. Singh and S.R. Karade, “Residual Properties of Basalt and Polypropylene Hybrid Fibre Reinforced Concrete Exposed to Elevated Temperatures”, The Indian Concrete Journal, Vol. 93, No. 8, August 2019, pp. 16-31.

International Journals

1. Ghosh, D., Beniwal, S., Ganguli, A., & Mukherjee, A. (2018). Reference free imaging of subsurface cracks in concrete using Rayleigh waves. Structural Control and Health Monitoring, e2246.https://doi.org/10.1002/stc.2246  (Impact Factor: 3.622)
2. Ghosh, D., Mittal, A. K., Bhattacharyya, S. K., &Behera, S. (2019). The Effect of Macroroughness in Front of Building for Tsunami Pressure Dissipation—A Numerical Study. In Recent Advances in Structural Engineering, Volume 1 (pp. 1013-1024). Springer, Singapore. (Book Chapter Springer)
3. Gupta, H., Ghosh, D., & Mittal, A. K. (2019). Seismic Performance of a Heritage Rubble Stone Masonry Building—A Case Study. In Recent Advances in Structural Engineering, Volume 2 (pp. 317-328). Springer, Singapore.(Book Chapter Springer)
4. Bisht, R.S., Pathak, P.M. and Panigrahi, S.K., 2018. Experimental investigations on permanent magnet based wheel mechanism for safe navigation of climbing robot. Procedia Computer Science, 133, pp.377-384.
5. Singh Siddharth, SoumitraMaiti, Hari Raj, Ravindra Singh Bisht, A. K. Minocha, S. K. Panigrahi, S. J. Alexander, Sameer Yadav, and Mahavir Singh. “X-ray photoelectron spectroscopy study on adsorption property of harmful air pollutants on zeolite prepared from fly ash.” Materials Research Express (2018).Volume 5, Number 8.
6. Chaurasia, A., S. K. Panigrahi, and S. S. Patel. “Damage Identification of Reinforced Concrete Beam Using Modal Curvature Approach.” Journal of Scientific & Industrial Research, June, V-77, (2018).
7. Patel, Shiv Singh, Ajay Chourasia, S. K. Panigrahi, S. K. Bhattacharyya, and Jalaj Parashar. “A Study on Efficacy of Wavelet Transform for Damage Identification in Reinforced Concrete Buildings.” Journal of Vibration Engineering & Technologies(2018): 1-12.
8. Anuj Kumar, Abhishek Singh, Ashok Kumar, Manoj Kumar Singh, Pinakeswar Mahanta, and Subhas Chandra Mukhopadhyay. Sensing Technologies for Monitoring Intelligent Buildings: A Review. IEEE SENSORS Journal, Vol. 18, No. 12, 4847- 4860, June 15, 2018 (Impact Factor: 2.512).
9. L.P. Singh, Vishakha Bisht, M.S. Aswathy, Leena Chaurasia and Sanjay Gupta, “Studies on performance enhancement of recycled aggregate by incorporating bio and nano materials”, Construction and Building Materials, 181, 12 June 2018, pp. 217–226.
10. Pandit K., Sarkar S., Sharma M. (2019) Optimization Techniques in Slope Stability Analysis Methods. In: Pradhan S., Vishal V., Singh T. (eds) Landslides: Theory, Practice and Modelling. Advances in Natural and Technological Hazards Research, vol 50. Springer, Cham. DOI: 10.1007/978-3-319-77377-3_11
11. Sarkar S., Pandit K., Sharma M., and Pippal A. “Risk assessment and stability analysis of a recent landslide at Vishnuprayag on the Rishikesh–Badrinath highway, Uttarakhand, India”, Current Science (IF: 0.843 in 2016), Vol. 114 Issue 7, April, 2018, p1527-1533. DOI: 10.18520/cs/v114/i07/1527-1533
12. S. Nimbalkar, AVS Ramakrishna and A. Pain, (2018). “A simplified approach to seismic stability of tailings dams”, Journal of Rock Mechanics and Geotechnical Engineering, Elsevier (Available online with DOI: 10.1016/j.jrmge.2018.06.003)
13. A. Pain, AVS Ramakrishna and Sanjay Nimbalkar, (2018) “Seismic Active Thrust on rigid retaining wall using strain dependent dynamic properties”, International Journal of Geomechanics, ASCE (Accepted, in Press) (IF: 2.332/2017) [SCI Indexed].
14. L.P. Singh, V. Bisht, M.S. Aswathy, L. Chaurasia, S. Gupta, “Studies on performance enhancement of recycle aggregate by incorporating bio & nano materials”, Construction and Building Materials, 181, (2018),217-226. (I.F. = 3.5)
15. P. Hou, R. Li, H. Li, N. Xie, X. Cheng, L.P. Singh, “The use of hydrophobicity and pozzolanic reactivity of the PMHS/nanosilica hybrid composites on the water absorption of cement mortar”, Journal of Thermal Analysis and Calorimetry, (2018), https://doi.org/10.1007/s10973-018-7320-x (I.F. = 2.0)

National Journals

1. Ghosh, H. Gupta, A. Mittal, R. Shekhar (2018) “Inspection of Heritage Structure using Infrared Thermography”, The e-Journal of Nondestructive Testing, Vol.23 No.04 -ISSN 1435-4934
2. Ghosh, K. Rahul, D. Roy, A. Ganguli, S. Tuli, A. Mukherjee (2018) “Combination of thermal and ultrasonic imaging techniques for detection of sub-surface defects in concrete”,The e-Journal of Nondestructive Testing, Vol.23 No.04 -ISSN 1435-4934
3. Gupta H, Ghosh D, Behera S, Mittal AK. “Comparative study between ERS Sensors and VWSG”,The e-Journal of Nondestructive Testing, Vol.23 No.04 -ISSN 1435-4934
4. N. Gopalakrishnan, Ashok Kumar, Kishor S. Kulkarni, Sayantani Lala.  Green Building: An Imperative Development. RITES Journal, Pages 14.1-14.16.
5. A. Pain, AVS Ramakrishna and S. Sarkar, (2018) “Seismic stability analysis of municipal solid waste landfills using strain dependent dynamic properties”, Indian Geotechnical Journal, Springer (Available online with DOI: 10.1007/s40098-018-0314-6)
6. Boski Chauhan, G J Joshi, Purnima Parida, Driving cycle analysis to identify intersection influence zone for urban intersections under heterogeneous traffic condition, submitted to Journal of Sustainable Cities and Society,Elsevier, Science Direct,  Volume 41, August 2018, Pages 180-185.

International Journals

1. A. Singh, Y. Pandey, Ashok Kumar, M.K. Singh, Anuj Kumar and S.C. Mukhopadhyay, “Ventilation Monitoring and Control System for High Rise Historical Buildings”, IEEE Sensors Journal, Vol. 17, No. 22, November 15, 2017, pp. 7533-7541. (IF 2.617)
2. B.M. Suman and P.K. Yadav, “Empirical Approach for Prediction of Indoor Air Temperature of a Building”, IOSR Journal of Mechanical and Civil Engineering, Vol. 14, No. 5, Ver. 1, 2017, pp. 44-49. (IF 3.16)
3. Balvir Singh, R.S. Chidambaram, S. Sharma and N. Kwatra, “Behavior of FRP Strengthened RC Brick In-filled Frames Subjected to Cyclic Loading”, Structural Engineering and Mechanics, Vol. 16, No. 5, 2017, pp. 557-566. (IF 1.18)
4. Bivina G.R., Purnima Parida, Mukti Advani and Manoranjan Parida, “Pedestrian Level of Service Model for Evaluating and Improving Sidewalks from Various Land Uses”, European Transport\Trasporti Europei, International Journal of Transport Economics, Engineering and Law, No. 67, January 2018, ISSN 1825-3997.
5. Chandan Swaroop Meena, Akash Deep and Arup Kumar Das, “Understanding of Interactions for Bubbles Generated at Neighbouring Nucleation Sites”, Heat Transfer Engineering, Vol. 39, No. 10, pp. 885-900, DOI: 10.1080/01457632.2017.1338866. (IF 1.170)
6. C. Shermi and R.N. Dubey, “Study on Out-Of-Plane Behaviour of Unreinforced Masonry Strengthened With Welded Wire Mesh & Mortar”, Construction and Building Materials, Vol 143, July 15, 2017, pp. 104-20. (IF 3.169)
7. C. Shermi and R.N. Dubey, “Performance Evaluation of a Reinforced Masonry Model and an Unreinforced Masonry Model Using a Shake Table Testing Facility”, Journal of Performance of Constructed Facilities (ASCE), Vol. 32, No. 1, November 22, 2017, 04017121.
8. E. Rajasekar, Ashok Kumar and Ramachandriah Alur, “Thermal Performance of Building Envelopes”, Encyclopedia of Sustainable Technologies, 1st Edition, Elsevier, Vol. 2, July 2017, pp. 169-188.
9. K.K. Pradhan, S. Chakraverty and S.K. Panigrahi, “Implementation of Numerical Approximations in Studying Vibration of Functionally Graded Beams”, International Journal of Dynamics and Control, Springer, November 29, 2017 (online), pp. 1-24.
10. Kishor S. Kulkarni, Ashok Kumar and Navjeev Saxena, “An Integrated Approach towards a Model Village: Case Study from Belagavi District”, Journal of Environmental Nanotechnology, Vol. 6, No. 2, June 2017, pp. 48-54. (IF 0.601)
11. L.P. Singh, W. Zhu, T. Howind and U. Sharma, “Quantification and Characterization of CSH in Silica Nanoparticles Incorporated Cementitious System”, Cement and Concrete Composites, Vol. 79, May 2017, pp. 106-116. (I.F.= 4.26)
12. Mukti Advani, Purnima Parida and Shobhna Pattnaik, “Pedestrian Serviceability Index Including Pedestrians on Vehicle-Path”, Journal of Traffic and Transportation Engineering, Vol. 5, No. 6, November-December 2017, S. No. 20.
13. M.A. Iqbal, V. Kumar and A.K. Mittal, “Behaviour of Pre-stressed and Reinforced Concrete Plates Subjected to Impact Loads Induced by Free Falling Indenter”, Procedia Engineering, Vol. 173, 2017, pp. 397-402.
14. M.K. Singh, S. Kumar, R. Ooka, H. B. Rijal, G. Gupta and Anuj Kumar, “Status of Thermal Comfort in Naturally Ventilated Classrooms during the Summer Season in Composite Climate of India”, Building and Environment, Vol. 128, January 15, 2018, pp. 287-304. (IF 4.593)
15. M. Sharma, M. Samanta and S. Sarkar, “A Laboratory Study on Pullout Capacity of Helical Soil Nail in Cohesionless Soil”, Canadian Geotechnical Journal, Vol. 54, No. 10, pp. 1482-1495, DOI: org/10.1139/cgj-2016-0243.
16. Neeraj Jain and A.K. Minocha, “Pollution Monitoring, Dispersion Modelling and proposed Siting Criteria for New Brick Kilns”, Journal of Environmental Science, Toxicology and Food Technology (IOSR), Vol. 11, No. 12, December 2017, pp. 53-59.
17. Neeraj Jain and R. K. Verma, “Characterization and Utilization of ETP Sludge of an Automobile Industry for Development of Construction Products, Journal of Mechanical and Civil Engineering (IOSR), Vol. 15, No. 2, March 2018, pp. 65-71.
18. Priyanka Tomar, Rajni Lakhani, V.K. Chhibber and Rajesh Kumar, “Macro-Defect Free Cements: A Future Oriented Polymer Composite Materials for Construction Industries”, Composite Interfaces, Taylor & Francis Ltd., Vol. 25, No. 5-7, February 2018, pp. 607-627, DOI: 10.1080/09276440.2018.1439637. (IF: 1.083)
19. R. Bharti, R.S. Chidambaram, and N. Kwatra, “Influence of Fiber Reinforced Concrete on Plastic Behavior on Exterior Beam Column Joint under Cyclic Loading”, Procedia Engineering, Vol. 173, 2017, pp. 1122-1129.
20. Rajesh Kumar, Rajni Lakhani and Priyanka Tomar, “A Simple Novel Mix Design Method and Properties Assessment of Foamed Concretes with Limestone Slurry Waste”, Journal of Cleaner Production, Elsevier, Vol. 171, January 2018, pp. 1650-1663, DOI:10.1016/j.jclepro.2017.10.073. (IF: 6.207)
21. R. Kumar, S. Singh and L.P. Singh, “Studies on Enhanced Thermally Stable High Strength Concrete Incorporating Silica Nanoparticles”, Construction and Building Materials, Vol. 153, October 30, 2017, pp. 506-513. (I.F. 3.16)
22. R. Palla, S.R. Karade, G. Mishra, U. Sharma and L.P. Singh, “High Strength Sustainable Concrete using Silica Nanoparticles”, Construction and Building Materials, Vol. 138, May 01, 2017, pp. 285-295. (I.F. = 3.16)
23. R.S. Chidambaram, and P. Agarwal, “Performance Evaluation of Innovative Hybrid Rebar Coupler in Reinforced Concrete Beams Subjected to Monotonic Loading”, Structural Concrete, DOI: 10.1002/suco.201700083. (IF 1.4)
24. Sayantani Lala, N. Gopalakrishnan and Ashok Kumar, “A Comparative Study on the Seismic Performance of the Different Types of Bamboo Stilt Houses of North-East India”, Journal of Environmental Nanotechnology, Vol. 6, No. 2, June 2017, pp. 59-73. (IF 0.601)
25. S. Rajput, L.P. Singh, C.U. Pittman and D. Mohan, “Lead (Pb2+) and Copper (Cu2+) Remediation from Water using Superparamagnetic Maghemite (γ-Fe2O3) Nanoparticles Synthesized by Flame Spray Pyrolysis (FSP)”, Journal of Colloid and Interface Science, Vol. 492, April 15, 2017, pp. 176-190. (I.F. = 4.23)
26. Shailza Singh and Prabhjot Singh Chani, “Thermal Comfort Analysis of Indian Subjects in Multi-Storeyed Apartments: An Adaptive Approach in Composite Climate”, Indoor and Built Environment, DOI: 10.1177/1420326X17712797. (IF 1.181)
27. T. Alam and Man Hoe Kim, “Heat Transfer Enhancement in Solar Air Heater Duct with Conical Protrusion Roughness Ribs”, Applied Thermal Engineering, Vol. 126, pp. 485-469. (IF 3.3560)
28. V. Kumar, M.A. Iqbal and A.K. Mittal, “Energy Absorption Capacity of Pre-stressed and Reinforced Concrete Slabs Subjected to Multiple Impacts”, Procedia Structural Integrity, Vol. 6, 2017, pp. 11-18.
29. V. Kumar, M.A. Iqbal and A.K. Mittal, “Behaviour of Pre-stressed Concrete under Drop Impact Loading”, Procedia Engineering, Vol. 173, 2017, pp. 403-408.
30. V. Kumar, M.A. Iqbal and A.K. Mittal, “Impact Resistance of Pre-stressed and Reinforced Concrete Slabs under Falling Weight Indenter”, Procedia Structural Integrity, Vol. 6, 2017, pp. 95-100.
31. V.S.R. Annapareddy, A. Pain, and S. Sarkar, “Seismic Translational Failure Analysis of MSW Landfills using Modified Pseudo-Dynamic Approach”, International Journal of Geomechanics, Vol. 17, No. 10, October 2017, DOI: 10.1061/(ASCE)GM.1943-5622.0000990.
32. V.V. Nelubova, P. Hou, V.V. Strokova, L.P. Singh, D.D. Netsvet and D.O. Bandarenko, “Complex Study of Modified Binder Properties”, Advances in Engineering Research, Vol. 133, 2017, pp. 543-548.

National Journals

1. Ashok Kumar, Sayantani Lala and Kishor S. Kulkarni, “Impact of Increased Heights and Floor Area Ratio (FAR) on Housing Environments”, Nirman Sarika, World Habitat Day Special Issue, Vol. 6, No. 3, July-September 2017, pp. 58-63, BMTPC, New Delhi.
2. Ashok Kumar, Sayantani Lala, Kishor Kulkarni and Vijay Raj Deopa, “Housing at the Centre for Sustainable Future of Cities”, Journal of Indian Buildings Congress, Volume 25, No. 2, December 2017, pp. 153-160, ISSN 2349-7475.
3. अतुल कुमार अग्रवाल, “सस्ती भवन तकनीक-सीबीआरआई का राष्ट्र निर्माण में योगदान”, भारतीय वैज्ञानिक एवं औद्योगिक अनुसंधान पत्रिका, वर्ष 25, अंक 1 एवं 2, 2017, पृ. 63-74, , सीएसआईआर- राष्ट्रीय विज्ञान संचार एवं सूचना स्रोत संस्थान, नई दिल्ली।
4. अतुल कुमार अग्रवाल, “आधुनिक युग की विकसित भवन सामग्रियां”, वैज्ञानिक, वर्ष 49, अंक 4, अक्टूबर-दिसंबर 2017, पृ. 23-27, हिन्दी विज्ञान साहित्य परिषद, भाभा परमाणु अनुसन्धान केंद्र, मुंबई।
5. अतुल कुमार अग्रवाल, “भवन निर्माण सामग्रियों में लकड़ी का विकल्प”, वैज्ञानिक, वर्ष 49, अंक 2, अप्रैल-जून 2017, पृ. 27-31, हिंदी विज्ञान साहित्य परिषद, भाभा परमाणु अनुसन्धान केंद्र, मुंबई।
6. बाल मुकुंद सुमन, “भवनों में पर्यावरण अनुकूलित उष्मारोधी सामग्री के उपयोग से भूमंडलीय ताप का नियंत्रण”, वैज्ञानिक, वर्ष 49, अंक 2, अप्रैल-जून 2017, पृ. 21-26, हिंदी विज्ञान साहित्य परिषद, भाभा परमाणु अनुसंधान केंद्र, मुंबई ।
7. Jiten Shah, Gaurang Joshi, Shriniwas Arkatkar and Purnima Parida, “Estimation of Free Speed of Pedestrian Flow on Stairways at Busy Suburb Rail Transit Station in India”, Current Science, Vol. 113, No. 5, September 2017, pp. 10.
8. N. Gopalakrishnan, Ashok Kumar, Kishor S. Kulkarni and Sayantani Lala, “Green Buildings: An Imperative Development”, RITES Journal, Vol. 20, No. 1, January 2018, pp. 14.1-14.16.
9. R.S. Chidambaram, V.V.S.S.K. Dadi, and P. Agarwal, “Seismic Retrofitting of Damaged Column of Buildings by using External Bolted Mechanical Couplers with and without FRP Confinement”, The Master Builder, Vol.19, No.11, 2017, pp. 32-36.
10. S.K. Singh and S.K. Kirthika, “Manufactured Sand: A Foreseeable Alternative to River Sand”, Nirman Sarika, World Habitat Day Special Issue, Vol. 6, No. 3, July-September 2017, pp. 39-46, BMTPC, New Delhi.
11. S. Sarkar and M. Samanta, “Stability Analysis and Remedial Measures of a Landslip at Keifang, Mizoram – A Case Study”, Journal of Geological Society of India, Vol. 89, No. 6, 2017, pp. 617-740.
12. T.B. Roy, S. Banerji, S.K. Panigrahi, A. Chourasia, Tirca Lucia and Ashutosh Bagchi, “Modal Identification and Damage Detection in Structures Using Non-Linear and Non-Stationary Vibration Response”, Journal of Structural Engineering, Vol. 44, No. 3, August-September 2017, pp. 220-227.

International Journals

1. A. Pain, D. Choudhury and S.K. Bhattacharyya, “Seismic Rotational Stability of Gravity Retaining Walls by Modified Pseudo-Dynamic Method”, Soil Dynamics and Earthquake Engineering, Vol. 94, 2017, pp. 244-253, DOI: 10.1016/j.soildyn.2017.01.016.
2. A. Pain, D. Choudhury and S.K. Bhattacharyya, “Closure to Seismic Uplift Capacity of Horizontal Strip Anchors Using a Modified Pseudo-Dynamic Approach”, International Journal of Geomechanics, 2017, DOI: 10.1061/(ASCE)GM.1943-5622.0000471
3. A. Pain, D. Choudhury and S.K. Bhattacharyya, “Seismic Rotational Displacement of Retaining Walls: A Pseudo-Dynamic Approach”, Innovative Infrastructure Solutions, Vol. 1, No. 22, 2016, DOI: 10.1007/s41062-016-0023-x.
4. Ajay Chourasia, S.K. Bhattacharyya, Pradeep Bhargava and N.M. Bhandari, “Seismic Performance of Different Masonry Buildings: A Full-Scale Experimental Study”, International Journal of Performance of Constructed Facilities, 2016, ISSN: 0887-3828, DOI: 10.1061/(ASCE)CF.1943-5509.0000850.
5. Akash Kumar, Chandan Swaroop Meena and Arup Kumar Das, “Interaction of Asymmetric Films Around Boiling Cylinder Array: Homogenous Interface to Chaotic Phenomenon”, Journal of Heat Transfer, 2017, 139(4):041502-041502-11.
6. Ashok Kumar, Ajay Chourasia, Sayantani Lala, Aditya Kumar and V ijayraj, “Prefabricated Foundation System for Single Storey Houses”, International Journal for the Advancement of Performance Information & Value, Vol. 8, No. 2, January 2017, pp. 78-91.
7. Changqing Qi, Jimin Wu, Jin Liu and D.P. Kanungo, “Assessment of Complex Rock Slope Stability at Xiari, Southwestern China”, Bulletin of Engineering Geology and Environment, Vol. 75, No. 2, 2016, pp. 537-550.
8. D. Ghosh, A.K. Mittal and S.K. Bhattacharyya, “Multiphase Modeling of Tsunami Impact on Building with Openings”, The Journal of Computational Multiphase Flows, DOI: 10.1177/0010836716653881.
9. Harendra Kumar, Nutan Kumari Chauhan and P.K. Yadav, “Dynamic Tasks Scheduling Algorithm for Distributed Computing Systems under Fuzzy Environment”, International Journal of Fuzzy System Applications, Vol. 5, No. 4, 2016, pp. 77-95, ISSN: 2156-177X, EISSN: 2156-1761, DOI: 10.4018/IJFSA.
10. J. Liu, Y. Wang, Y. Lu, J. Wei and D.P. Kanungo, “Application of Distributed Optical Fiber Sensing Technique in Monitoring the Ground Deformation”, Journal of Sensors, 2017, DOI: 10.1155/ 2017/6310197.
11. J. Liu, J. Wei, H. Hu, J. Wu, S. Sun and D.P. Kanungo, “Research on the Engineering Geological Conditions and Stability Evaluation of the B2 Talus Slide at the Jinan Bridge Hydropower Station, China”, Bulletin of Engineering Geology and Environment, 2017, DOI: 10.1007/s10064-017-1005-8.
12. Kranthi Kumar, V.A. Sawant, Pradeep Kumar and S.K. Shukla, “Numerical and Experimental Investigations of Granular Anchor Piles in Loose Sandy Soil Subjected to Uplift Loading”, International Journal of Geomechanics, published online, July 7, 2016, ISSN: 1532-3641, Ref Paper No. MS GMENG- 1459R2- [EMID :8617ccd195fd661b].
13. K. Lakshmi, A. Rama Mohan Rao and N. Gopalakrishnan, “Singular Spectrum Analysis combined with ARMAX Model for Structural Damage Detection”, Structural Control and Health Monitoring, published online, November 8, 2016, DOI: 10.1002/stc.1960.
14. K.V. Kumar, T.J. Saravanan, R. Sreekala, N. Gopalakrishnan and K.M. Mini, “Structural Damage Detection through Longitudinal Wave Propagation using Spectral Finite Element Method”, Geomechanics and Engineering, Vol. 12, No. 1, 2017, pp. 161-183.
15. L.P. Singh, D. Ali and U. Sharma, “Studies on Optimizations of Silica Nanoparticles in Cementitious Material”, Cement Concrete Composites, Vol. 70, 2017, pp. 60-68.
16. L.P. Singh, S.K. Bhattacharyya, S.P. Shah, G. Mishra and U. Sharma, “Studies on Early Stage Hydration of Tricalcium Silicate incorporating Silica Nanoparticles: Part II”, Construction and Building Materials, Vol. 102, 2016, pp. 943-949.
17. L.P. Singh, W. Zhu, T. Howind and U. Sharma, “Quantification and Characterization of CSH in Silica Nanoparticles incorporated Cementitious System”, Cement and Concrete Composites Vol. 79, 2017, pp. 106-116.
18. M. Mittal, “Explosibility of Hydrogen-Air Mixtures in Large Spherical Vessel”, International Journal of Innovative Research and Advanced Studies”, Vol.4, No.3, 2017, pp. 160-165.
19. M. Mittal, “Explosion Pressure Measurement of Methane-Air Mixtures in Different Sizes of Confinement”, Journal of Loss Prevention in Process Industries, Vol. 46, March 2017, pp. 200-208.
20. P. Punetha, P. Mohanty and M. Samanta, “Microstructural Investigation on Mechanical Behavior of Soil-Geosynthetic Interface in Direct Shear Test”, Geotextiles and Geomembranes, 2017, DOI: 10.1016/ j.geotexmem.2017.02.001.
21. R. Gupta and P.K. Yadav, “Reliability Analysis of Distributed Computing System using Fault Tree Analysis”, CiiT International Journal of Networking and Communication Engineering, ISI Vol. 8, No. 8, August 2016, pp. 286-291, ISSN: 0974 – 9713.
22. R. Palla, S.R. Karade, G. Mishra, U. Sharma and L.P. Singh, “High Strength Sustainable Concrete using Silica Nanoparticles”, Construction and Building Materials, Vol. 138, 2017, pp. 285-295.
23. Santha Kumar G and A.K. Minocha, “Studies on Thermochemical Treatment of Recycled Concrete Fine Aggregates for Use in Concrete”, Journal of Material Cycles and Waste Management, Springer, March 2017, published online, DOI 10.1007/s10163-017-0604. ISSN: 1438-4957.
24. Surendra Beniwal, Debdutta Ghosh and Abhijit Ganguli, “Ultrasonic Imaging of Concrete using Scattered Elastic Wave Modes”, NDT & E International, Vol. 82, 2016, pp. 26-35, DOI: 10.1016/j.ndteint.2016.04.003.
25. S. Patel, Ajay Chourasia, S.K. Panigrahi, J. Parashar, N. Parvez and M. Kumar, “Damage Identification of RC Structures using Wavelet Transformation”, Procedia Engineering, Vol. 144, pp. 336-342, published online.
26. S. Rajput, L.P. Singh, C.U. Pittman and D. Mohan, “Lead (Pb 2+) and Copper (Cu2+) Remediation from Water using Superparamagnetic Maghemite (ã-Fe2O3) Nanoparticles Synthesized by Flame Spray Pyrolysis (FSP)”, Journal of Colloid and Interface Science, Vol. 492, 2017, pp. 176-190.
27. T.J. Saravanan, G.V.R. Rao, J. Prakashvel, N. Gopalakrishnan, N. Lakshmanan and C.V.R. Murty, “Dynamic Testing of Open Ground Storey Structure and In-Situ Evaluation of Displacement Demand Magnifier”, ASCE Journal of Performance of Constructed Facilities, Vol. 31, No. 5, 2017, 04017055-1: 20.
28. T.J. Saravanan, N. Gopalakrishnan and N.P. Rao, “Experiments on Coupled Axial-Flexural Wave Propagation in a Sagged Rod with Structural Discontinuity using Piezoelectric Transducers”, Journal of Vibration and Control, 2017, pp. 1- 15, DOI: 10.1177/ 1077546317693431.
29. T.J. Saravanan, N. Gopalakrishnan and N.P. Rao, “Detection of Damage through Coupled Axial- Flexural Wave Interactions in a Sagged Rod using Spectral Finite Element Method”, Journal of Vibration and Control, 2016, pp. 1-20, DOI: 10.1177/ 1077546316630855.

National Journal

1. A.K. Mittal, M.M. Dalbehera, S.K. Bhattacharyya, Bharat Bhushan and Sachin Kumar, “Performance of High Strength Reinforced Concrete Beams under Multiple Loading: Experimental Study”, The Indian Concrete Journal, Vol. 90, No. 8, August 2016, pp. 26-31.
2. Ashok Kumar, Aravind Kumar and Somya Srivastava, “Night Ventilation Cooling – A Green Retrofit Strategy for Existing Buildings”, Consulting Ahead, Vol. 10, No. 2, July 2016, pp. 17-29.
3. C. Priya Bharathi and N. Gopalakrishnan, “Parameter Identification of Long Stroke and Short Stroke MR Damper for its Use in Semi-Active Vibration Control”, Journal of The Institution of Engineers (India): Series A, 2016, pp 1-10, DOI: 10.1007/s40030-016-0182-y
4. M. Mittal, “Explosion Severity Measurement for Hydrogen-Air Mixture in 20-litre Sphere”, Chemical Engineering World, Vol.51, No. 5, 2016, pp. 32-34.
5. M. Mittal, “Hazard Analysis and Safety of Pipes against Internal Gaseous Explosions in Industries- Part-1”, Chemical Industry Digest, Vol. 29, No. 6, 2016, pp. 96-104.
6. M. Mittal, “Hazard Analysis and Safety of Pipes against Internal Gaseous Explosions in Industries- Part-2”, Chemical Industry Digest, Vol. 29, No.7, 2016, pp. 73-79.
7. P.C. Thapliyal, S.R. Karade and A. Pundir, “Effect of Coating Thickness and Nano Additive on Permeability of Some Modified Waterborne Acrylic Coatings”, Journal of Indian Chemical Society, Vol. 94, No. 1, 2017, pp. 47-52.
8. Rajesh K. Verma and Zubair Ahmed, “Surface Treatment of Secretariat Building, Chandigarh (India) using Selected Concrete Sealers for Protection from Environmental Deterioration”, Current Science, Vol. 111, No.7, 2016, pp. 1234-1241, ISSN: 0011-3891.
9. V.K. Tonk, V.K. Dwivedi, P.K. Yadav and P.K. Yadav, “Coded-Cooperation based Multi-Relay Algorithm for Device-to-Device Communication in 5G Cellular Networks”, Indian Journal of Science and Technology, Vol. 10, No. 4, January 2017, pp. 1-10, DOI: 10.17485/ijst/2017/v10i4/110889.

International Journals

1. A.A. Ansari and Rakesh Kumar, “Fire Performance of Plywood Treated with Chemical Surface Barrier”, International Journal of Housing & Human Settlement Planning, Vol. 1, No. 1, 26-34, 2015, ISSN: 2455-8516 (online).
2. A. Aravind Kumar and Rajiv Kumar, “Prediction Time for Sprinkler Activation and Fire Suppression for Polyurethane Foam Fire using Computational Fluid Dynamics”, Fire Engineer, 30-32, 44, July-September, 2015
3. Ajay Chourasia, S.K. Bhattacharyya, Pradeep Bhargava and N.M. Bhandari, “Seismic Performance of Different Masonry Buildings: A Full-scale Experimental Study”, International Journal of Performance of Constructed Facilities, American Society of Civil Engineers, ISSN 0887-3828, DOI 10.1061/(ASCE)CF.1943-5509.0000850.
4. Ajay Chourasia, Y. Tarannum, S.K. Bhattacharyya and J. Parashar, “Fragility Analysis for Seismic Vulnerability Assessment of Buildings: A Review”, International Journal of Earthquakes & Structure, International Research Journal of Engineering & Technology, Vol. 2, No. 6, 502-508, September 2015, 3-ISSN: 2395-0056, p-ISSN: 2395-0072.
5. Ajay Chourasia and S.K. Bhattacharyya, “Confined Masonry Construction for India: Prospects & Solution for Improved Behaviour”, IBC Journal, Vol. 1, September 2015, ISSN 2349-7467
6. A. Pain, D. Choudhury and S.K. Bhattacharyya, “Seismic Uplift Capacity of Horizontal Strip Anchors using a Modified Pseudo-Dynamic Approach”, International Journal of Geo Mechanics, ASCE, Vol. 16, No. 1, 2016, 04015025, DOI: 10.1061/ (ASCE) GM.1943-5622.0000471, (IF: 1.197/2013).
7. Ashok Kumar, P.S. Chani and Rajesh Deoliya, “Low Embodied Energy Sustainable Building Materials and Technologies”, Special Volume of Key Engineering Materials, Vol. 650, 13-20, April-May 2015, © (2015) Trans Tech Publications, Switzerland, DOI:10.4028/www.scientific.net/KEM.650.13.
8. B.M. Suman and R.K. Garg, “Energy Efficient Building through Energy Simulation using Different Insulating Materials”, European Journal of Applied Engineering and Scientific Research, Vol. 4, No. 1, 7-15, 2015
9. B.M. Suman, “Thermal Conductivity Measurement of Powder Material and its Optimum Application for Energy Efficient Cold Storage”, International Journal of Applied Engineering and Technology, Vol. 5, No. 1, 78-83, 2015.
10. B. Singh, Ishwarya G., M. Gupta and S. K. Bhattacharyya, “Geopolymer Concrete: A Review of Some Recent Developments”, Construction and Building Materials, 85, 78-90, 2015
11. B. Singh, M.R. Rahman, R. Paswan and S.K. Bhattacharyya, “Effect of Activator Concentration on the Strength, ITZ and Drying Shrinkage of Fly Ash/Slag Geopolymer Concrete”, Construction and Building Materials, 118, 171-179, 2016
12. Harpal Singh, “Synergistic Effect of Phosphorus-Halogen Fire Retardant Additives on the Flammability of Polyurethane Foams”, Polyurethanes, Vol. 10, No. 3, 26-29, 2015
13. Leena Chaurasia and Vishakha Bisht, “Resistance of Bio-based Cementitious Material to Acid Attack”’ International Journal of Current Research, Vol. 7, No. 11,23,112-118, November, 2015
14. L.P. Singh, D. Ali and U. Sharma, “Studies on Optimizations of Silica Nano-Particles in Cementitious Material”, Cement Concrete Composites, 70, 60-68, 2016
15. L.P. Singh, S.K. Bhattacharyya, S.P. Shah, G. Mishra, and U. Sharma, “Studies on Early Stage Hydration of Tricalcium Silicate incorporating Silica Nano-Particles: Part II”, Construction & Building Materials, 943-949, 102 2016
16. L.P. Singh, S.K. Bhattacharyya, A. Goel, U. Sharma and G. Mishra, “Hydration Studies of Cementitious Material using silica Nano-Particles”, Journal of Advanced Concrete Technology, Vol. 13, 345-354, 2015
17. L.P. Singh, S.K. Bhattacharyya, A. Goel, and G. Mishra, “Quantification of Hydration Products in Cementitious Material incorporating Silica Nano-Particles”, Frontiers of Structural and Civil Engineering, 1-6, 2015.
18. L.P. Singh, S.K. Bhattacharyya, S.P. Shah, G. Mishra, S. Ahalawat and U. Sharma, “Studies on Early Stage Hydration of Tricalcium Silicate incorporating Silica Nano-Particles”, Construction & Building Materials, Vol. 74, 278–286, 2015.
19. M.K. Dwivedi, Neeraj Jain, Pragati Sharma and Chanchal Alawa, “Adsorption of Safranin from Waste Water using Coal Fly Ash”, IOSR Journal of Applied Chemistry, Vol. 8, No. 4, 27-55, April 2015.
20. M. Mittal, “Model for Prediction of Explosion Pressures of Organic Dust Clouds in Industrial Units”, International Journal of Advanced Engineering Technology, Vol. 6, No. 2, 19-28, April- June, 2015.
21. Neeraj Jain and Mridul Garg, “Formulation of Sulphate Resistant Super Sulphated Cement Using Fluorogypsum and Granulated Blast Furnace Slag”, IOSR Journal of Mechanical and Civil Engineering, Vol. 12, No. 3, 153-159, May 2015
22. Neeraj Jain, M.K. Dwivedi, Rashmi Agarwal and Pragati Sharma, “Removal of Malachite Green from Aqueous Solution by Zeolite-Iron Oxide Magnetic Nano-Composite”, IOSR Journal of Environmental Science, Toxicology and Food Technology, Vol. 9, No. 6, 42-50, Jun 2015.
23. R.K. Verma and A. Chourasia, “Protection of Bio-Deteriorated Reinforced Concrete using Concrete Sealers”, International Journal of Materials Chemistry and Physics, USA, Vol. 1, No. 1, 11-19, August 2015.
24. R.K. Verma, L. Chaurasia, V. Bisht and M. Thakur, “Bio-Mineralization and Bacterial Carbonate Precipitation in Mortar and Concrete”, Bioscience and Bioengineering, USA, Vol. 1, No. 1, 5-11, April 2015.
25. S.R. Karade, “Potential of Cork Cement Composite as a Thermal Insulation Material”, Key Engineering Materials, Theme: Materials and Construction Technologies for Sustainable Development, Vol. 666, 17-29, November 2015.
26. Vivek Sood, B.M. Suman and Ashok Kumar, “Effect of Plasters/Coatings on the Thermo-Physical Behaviour of Light Weight Pond Ash Blocks Based on Non Autoclaving”, Special Topic Volume Invited Peer Reviewed Papers on Materials and Technologies in Construction with Reference to Energy Efficiency and Sustainable Development, Trans Tech Publications, Switzerland, December, 2015.

National Journal

1. Ashok Kumar, Rajesh Deoliya and P.S. Chani, “Evaluation on Thermal Behaviour of a Green Roof Retrofit System Installed on Experimental Building in Composite Climate of Roorkee, India”, Refereed Journal of the Institution of Engineers (India): Series A, Vol. 96, 277-284, December 2015.
2. Ashok Kumar and Vijay Raj Deopa, “Concept of Public Spaces for All in Sustainable and Smart Cities”, Special Issue, Nirman Sarika, BMTPC, New Delhi, Vol. 4, No. 3, 8-11, October 2015.
3. Achal Mittal, M.M. Dalbehera, S.K. Bhattacharyya, Bharat Bhusan and Sachin Kumar,” Performance of High Strength Reinforced Concrete Beams under Multiple Impact Loading: Experimental Study”, Indian Concrete Journal, 2016.
4. B.S. Rawat, J. Ballabh and Rahul Kumar, “Imidacloprid 200 SL: An Odorless Termiticide for Buildings”, Pestology, Vol. 39, No. 3, 10-14, 2015.
5. M.Mittal, “Particle Size Moderation for Reducing Dust Explosions in Process Industries”, Chemical Products Finder, Vol. 33, No. 12, 15-18, May 2015
6. M. Mittal, “Domains of Flammability and Thermal Ignitability of Organic Dust-Polyethylene”, Chemical Industry Digest, Vol. 28, No. 8, 67-73, 2015.
7. M. Mittal, “Flammability and Thermal Ignitability Diagram for Lycopodium Dust”, Chemical Engineering World, Vol. 50, No. 9, 40-48, 2015.
8. M. Mittal, “Electrostatic Explosion Hazard for Ignition Sensitive Dusts”, Chemical Products Finder, Vol. 34, No. 5, 40-43, Oct 2015
9. S.K. Bhattacharyya and Atul Kumar Aggarwal, “CSIR-CBRI- Central Building Research Institute, Roorkee”, Current Science, Vol. 108, No. 8, 1444-1453, April 25, 2015.

International Journals

1. Aravind A. Kumar, Rajiv Kumar and Shorab Jain, “Application of Computational Fluid Dynamics for Different Fire Strengths in a Compartment using Combustion Modeling”, International Journal of Fire Science and Technology, Vol. 33(2014) No.2 35-46, DOI:http://dx.doi.org/10.3210/fst.33.35
2. Ashok Kumar, R. Deoliya, and P.S Chani, “Insulating Materials for Energy Saving in Buildings”, published in Special topic volume with Invited Peer Reviewed Papers on Materials and Technologies for Green Construction, Key Engineering Materials, Vol. 632 (2015), 1-14.
3. A. Pain, D. Choudhury and S. K. Bhattacharyya, “Seismic Stability of Retaining Wall-Soil Sliding Interaction using Modified Pseudo-dynamic Method”, Geo-technique Letters (ICE), 2015, 5(1), 56-61 [(DOI): 10.1680/geolett.14.00116].
4. D.P. Kanungo, Shaifaly Sharma and Anindya Pain, ”Artificial Neural Network (ANN) and Regression Tree (CART) Applications for the Indirect Estimation of Unsaturated Soil Shear Strength Parameters”, Frontiers of Earth Sciences, September 2014, Volume 8, Issue 3, pp 439-456 DOI:10.1007/s11707-013-0146-5, 2014
5. Jayant Joshi, Harish Chandra Arora and Umesh Kumar Sharma, “Structural Performance of Differently Confined and Strengthened Corroding Reinforced Concrete Columns”, Construction and Building Materials (Elsevier, UK), Vol. 82, February 2015, 287-295.
6. L.P. Singh, A. Goel, S. K. Bhattacharyya, S. Ahalawat, S. Sharma Usha and G. Mishra, “Effect of Nanosilica on Chloride Permeability in Cement Mortar”, Advances in Cement Research, 2014, 26 (1), 1-10.
7. L.P. Singh, Sriman K. Bhattacharyya, Rahul Kumar, Geetika Mishra, Usha Sharma, Garima Singh and Saurabh Ahalawat, “Sol-Gel Processing of Silica Nano-particles and their Applications”, Advances in Colloid and Interface Science, Vol. 214, December 2014, 17-37
8. L P Singh, S P Shah, S K Bhattacharyya, S. Ahalawat, G. Mishra and U Sharma “ Studies on Early Stage Hydration of Tricalcium Silicate Incorporating Silica Nano-particles: Part-I”, Construction & Building Materials, 74 (2015), 278-286
9. L.P. Singh, A. Goel, S. K, Bhattacharyya, S. Ahalawat, U. Sharma and G. Mishra, “Effect of Morphology and Dispersibility of Silica Nano-particles on the Mechanical Behaviour of Cement Mortar”, International Journal of Concrete Structures and Materials, doi 10.10071 $ 40069-015-0099-2 , February 28, 2015
10. Leena Chaurasia, R K Verma and V Bisht, “Microbial Carbonate Precipitation by Urease Producing Bacteria in Cementitious Materials”, International Journal of Advanced Biotechnology Research, Vol 5, No. 4, 2014, 671-679
11. M. Mittal, “Comparative Analysis of Dust Explosion Vent Areas for Industrial Units According to Various Methods”, Int. Journal of Advanced Engineering Research and Studies, Vol. 4, No.1, Oct.-Dec 2014, 83-92.
12. M. Mittal, “Domains of Flammability and Thermal Ignitability of Organic Dusts for Explosion Hazard Analysis and Safety”, International Journal of Advanced Engineering Research and Studies, Vol.4, No.2, Jan-March 2015, 50-56
13. Mridul Garg and Aakanksha Pundir, “Utilization of Brine Sludge in Non-structural Building Components – A Sustainable Approach”, Journal of Waste Management (USA). DOI: 10.1155/9048, 2014, 1-7.
14. Neeraj Jain, Mridul Garg, and A. K. Minocha, “Green Concrete from Sustainable Recycled Coarse Aggregates: Mechanical and Durability Properties”, Journal of Waste Management, Vol. 2015, Article ID 281043, January 2015, 1-8.
15. P.C. Thapliyal, S.R. Karade and Kirti Singh, “Improvement of Properties of Coating Systems with Cardanol Modified Epoxy Primer”, Journal of. Material Environ. Science, 6(4), 1009-15, 2015
16. P. K. S. Chauhan, Gayatri Devi and Abha Mittal “Site Response Study of Jammu City using Micro-tremor Measurements”, International Journal of Geotechnical Earthquake Engineering (IJGEE), Vol. 5, Issue 2. , 19-36.
17. P K Yadav, M P Singh, and A. Aggarwal, “Workload Analysis in a Grid Computing Environment: A Genetic Approach” International Journal of Computer Applications (0975 – 8887) Volume 93, No. 16, 26-29, May 2014
18. P. K Yadav, Nadeem Ahamad and R.K Sharma, ”A Network Flow Model for Determining the Safe Evacuation Plan of a Public Building”, IOSR Journal of Mathematics (IOSR-JM),Volume 10, Issue 5, Ver. IV , 13-24 , 2014
19. Ruchi Gupta and P.K. Yadav , “Mathematical Modelling of Load Distribution Problem in Distributed Computing Environment: A State of Art”, International Journal of Advanced Research in Computer Science and Software Engineering, Volume 4, Issue 7, 1106 -1119, July 2014
20. Rajiv Kumar and Narendra Kumar, “Species Concentrations in Enclosure Fires,” Journal of Applied Fire Science, Vol. 23, No. 4, 2013-14, 529-550
21. Sagar Gulati, K. Bhatia and P. K Yadav, “Execution Time and Failure Rate based Model for Reliability Optimization in Distributed Systems”, IRACST – International Journal of Computer Networks and Wireless Communications (IJCNWC), ISSN: 2250-3501 Vol. 4, No. 5, October 2014, 312-318, 2014
22. Shiv Lal, Nagesh Babu Balam, and H.K. Jain, “Performance Evaluation, Energy Conservation Potential, and Parametric Study of Borehole Heat Exchanger for Space Cooling in Building”, Journal of Renewable and Sustainable Energy, Volume 6, Issue 2 ,(2014) ; DOI: http://dx.doi.org/10.1063/1.4872362
23. Lakhani, R.*, Kumar, R., & Tomar, P. (2014). Utilization of stone waste in the development of value added products: A state of the art review. Journal of Engineering Science and Technology Review. 7, Issue 3, 180-187, ISSN: 1791-2377. DOI: 10.25103/jestr.073.29 

National Journal

1. Ashok Kumar, Sumeet Kumar, and Astha Chaudhary, “Intelligent Building Envelope, Solar Skin & Operable Stoma”, Journal of Architecture + Design, October 2014, 110 -115.
2. Ashok Kumar, Rajesh Deoliya, and P.S.Chani, “Single and Double Glazing Systems – for Retrofitting Existing Buildings”, Journal of Indian Institute of Architects, (India) January 2015, 16-22.
3. A.K.Minocha and M.K.Goyal, “Physico-chemical Analysis of Water from Different Location of Roorkee
   Township India,” Journal of Environmental Protection, 34(5): 424-428, 2014
4. A.K.Pandey, and R.S.Bisht, “Numerical Modelling of Infilled Clay Brick Masonry Under Blast Loading”,
   Advances in Structural Engineering, 17.4 (2014): 591-606.
5. B.M. Suman, “Study on Discomfort Degree Hours of Building Treated with Different Thermal Insulating
   Materials by Computer Software”, New Building Materials & Construction World, (NBM&CW) Vol. 20,
   Issue- 1, July (2014), 202- 206.
6. CVR Murty, Ajay Chourasia, Pradeep Kumar, Anup Karanth and Hari Kumar “Lessons from 1st May 2013 Doda (India) Earthquake Reiterate Urgent Need to Mitigate Seismic Risk,” J. of Disaster & Development
   Vol. 7 (1), December. 2014, 112-128
7. Harpal Singh, “Investigation on Properties of Water and Methylene Chloride Blown Rigid Polyurethane
   Foam”, Journal of Polymer & Composites, Vol. 2, No. 1, 46-54, 2014
8. H C Arora, U.K. Sharma, B.K. Rao and A. Chakraborty, “A Pilot Investigation for Comparative Assessment of Corrosion Durability of Reinforced Concrete Beams”, Indian Concrete Journal, Vol. 88, No. 5, May 2014, 36-44.
9. I. Siddharth, Swapnil K. and Ashok Kumar, “Flexi – Housing”, Journal of The Indian Institute of Architects, December 2014, 22-25.
10. M. Behera, S.K. Bhattacharyya, A.K. Minocha, R. Deoliya and S. Maiti, “Recycled Aggregate from C&D
    Waste and its Use in Concrete – A Breakthrough towards Sustainability in Construction Sector: A Review”, Construction and Building Materials, Vol. 68, October 15, 2014, 501–516.
11. M. Mittal, “Ignition Temperature of Micron- and Nano-Aluminum Dust Clouds: A Theoretical Model”
    Chemical Engineering World, Vol. 49, No. 12, December 2014, 38-47.
12. Mridul Garg, L.P Singh, Soumitra Maiti and Aakanksha Pundir, “Characterization of Automobile Effluent
    Treatment Plant Sludge: Its Utilization in Construction Materials” Construction and Building Materials,
    Vol 73, 30 December 2014, 603–609.
13. Neeraj Jain and Mridul Garg, “Development of Green Paving Blocks Using Recycled Aggregates: An
    Approach towards Sustainability,” IOSR Journal of Environmental Science, Toxicology and Food Technology, Vol. 9, Issue 1, January 2015, 52-61.
14. P.C. Thapliyal and Kirti Singh, “Water Based Coatings”, Everyman’s Science, 49(3), 2014, 149-52
15. Rajni Lakhani, Rajesh Kumar and Priyanka Tomar, “Utilization of Stone Waste in the Development of Value Added Products: A State of the Art Review’’ Journal of Engineering Science and Technology Review, Vol.7, Issue 3, August 2014, 180-187, ISSN: 1791-2377
16. S.K. Manocha, H.K. Singh, P.K. Yadav and B.M. Suman, “Prediction of Indoor Thermal Comfort Level
    using Fuzzy Logic”, IOSR J. of Mechanical and Civil Engineering, V.11, Issue 3 (May-June 2014), 25-33
17. T. Meraj, AK Pandey, and BK Rao, “Flexural Behaviour of Latex Modified Steel Fiber Reinforced Concrete”, Indian Journal of Engineering & Materials Sciences, Vol. 21, April 2014, 219-226
18. Vivek Sood, Ashok Kumar and S.K. Agarwal, “Comparative Hydration Behavior of Met kaolin- Microfine System” Journal of Engineering Computers & Applied Science, ISSN: 2319-5606, Volume 3, No. 4, April 2014, 60-65
19. Vinod Kumar Gupta, S. Kumar, R. Singh, L.P. Singh, S.K. Shoora and B. Sethi, “Cadmium (II) ion Sensing through p-tert-butyl calix[6]arene based Potentiometric Sensor” Journal of Molecular Liquids, Volume 195, July 2014, 65-68

Journals

1. Ashok Kumar, P.S.Chani & Rajesh Deoliya, Green Retrofit Potential in Existing Research Laboratories and Demonstration of Energy Efficient and Sustainable Technologies: Case Study, International Journal of Science, Engineering and Technology Research, Volume 3, Issue 3, March 2014, 400-405.
2. A.K. Minocha & M. K. Goyal, Effect of Immobilization of Cadmium Ions on the Hydration of Ordinary Portland Cement, Chemical Engineering & Process Technology 4(7), 2013(ISSN:2157-7048.1000170)
3. A.K. Minocha & M.K. Goyal, Immobilization of Molybdenum in Ordinary Portland Cement,Chemical Engineering & Process Technology 4(5), 2013 (ISSN:2157-7048.1000162)
4. A.Chourasia, S.K. Bhattacharyya, P. Bhargava & N. M. Bhandari, Ínfluential Aspects on Seismic Performance of Confined Masonry Construction, Natural Science, Vol.5, No. 8A1, 56-62, 2013
5. A.K. Pandey, Flexural Ductility of RC Beam Sections at High Strain Rates, Computers and Concrete, Vol. 12(4), 2013, 537-552.
6. D. P. Kanungo, A. Pain & S. Sharma, Finite Element Modeling Approach to Assess the Stability of Debris and Rock Slopes – A Case Study from The Indian Himalayas, Natural Hazards, 2013, Vol.69(1), 1-24 (DOI: 10.1007/s11069-013-0680-4).
7. Deepankar Choudhury, Amey Deepak Katdare & A. Pain, New Method to Compute Seismic Active Earth Pressure on Retaining Wall Considering Seismic Waves, Geotechnical and Geological Engineering, Vol. 32 (2), 391-402, 2014 (DOI: 10.1007/s10706-013-9721-8).
8. D. P. Kanungo & S. Sharma, Rainfall Thresholds for Prediction of Shallow Landslides around Chamoli-Joshimath Region, Garhwal Himalayas, India. Landslides, DOI 10.1007/s10346-013-0438-9, 2013
9. L.P. Singh, S.R. Karade, S. K. Bhattacharyya, M. M. Yousuf & S. Ahalawat, Beneficial Role of Nanosilica in Cement Based Materials – A Review, Construction & Building Materials, Vol. 47, 1069-1077, Oct, 2013.
10. Mridul Garg & Aakanksha Pundir, Investigation of Properties of Fluorogypsum-Slag Composite Binders-Hydration, Strength and Microstructure, Cement and Concrete Composites, Vol. 45,227-233, 2014 (Impact Factor: 3.359).
11. M. Mittal, Explosibility of Micron and Nano-Size Aluminum Powders, Chemical Engineering World, Vol.48, No.6, 38-47, June 2013.
12. M. Mittal, Explosion Hazards and Safety in Industries Handling Grain Products, Journal of Engineering Research and Studies, IV/III, 1-11, July-Sept. 2013.
13. M. Mittal, Study of Explosibility Data of Coal Dust for Designing Explosion Safety Measures, International Journal of Advanced Engineering Technology, Vol. IV/III, 82-91, July-Sept. 2013.
14. M. Mittal, Limiting Oxygen Concentration for Coal Dusts for Explosion Hazard Analysis and Safety, Journal of Loss Prevention in the Process Industries, Vol. 26, Issue 6, 1106-1112, Nov. 2013.
15. M. Mittal, Explosion Characteristics of Micron- and Nano-Size Magnesium Powders, Journal of Loss Prevention in the Process Industries, Vol. 27, 55-64, Jan. 2014.
16. M. Mittal, Experimental Study of Pyrolysis Gases for Thermo-Kinetic Modeling of Dust Explosions, Chemical Engineering World, Vol. 49, No.1, 49-53, Jan. 2014.
17. M. Mittal, Models for Minimum Explosible Concentration of Organic Dust Clouds, International Journal of Advanced Engineering Research & Studies, Vol. III, Issue II, 124-129, January-March, 2014.
18. M. Mittal, Measures to Prevent Sugar Dust Explosion, Chemical Engineering World, Vol.48, No.4, 60-66, April 2013.
19. Monika Chauhan, M. Gupta, B. Singh, A. K. Singh & V. K. Gupta, Effects of Functionalized Lignin on the Properties of Lignin-Isocyanate Prepolymer Blends and Composites, European Polymer Journal, Vol. 52, 32-43, 2014.
20. P.C. Thapliyal & Kirti Singh, Aerogels as Promising Thermal Insulating Materials: An Overview, Journal of Materials, Article ID 127049, 10, 2014, doi:10.1155/2014/127049.
21. P. Dhoke, R. Bhargava, & S. Jain, A Comparative Analysis of the Provisions of Smoke Control Systems in Buildings of National Building Code of India with other International Building Codes, International Journal of Engineering and Scientific Research (IJSER), Vol. 4(2), 2013.
22. Rajiv Kumar and M. P. Singh, Correlations among Signatures for Detection of Different Types of Fires, Fire Technology, Published online, 5^th July, 2013.
23. Rajiv Kumar & Vatsal Agarwal, Species Concentrations, Temperatures and Velocities in Fire Plumes, Journal of Applied Fire Science. Vol. 22(3), 239-258, 2013.
24. Rajiv Kumar, R.K. Sharma, P.K. Yadav & A.K. Gupta, Use of Fire Models in Post Fire Investigations-A Case Study, Journal of Applied Fire Science, Vol. 22(3), 259-277, 2013.
25. Rajni Lakhani & Priyanka Tomar, Studies on Polymer Blend for Repair Applications, New Building Materials & Construction World, Vol 20, Issue-8, 144-147, February 2014.
26. Shaorui Sun, Penglei Xu, Jimin Wu, Jihong Wei, Wengan Fu, Jin Liu & D.P. Kanungo, Strength Parameter Identification and Application of Soil–Rock Mixture for Steep-Walled Talus Slopes in South-Western China, Bulletin of Engineering Geology and Environment, 73(1),123-140, 2014
27. S. Sarkar, D. P. Kanungo & S. Sharma, Landslide Hazard Assessment in The Upper Alaknanda Valley of Indian Himalayas, Geomatics, Natural Hazards and Risk, http://dx.doi.org/10.1080/19475705.2013.847501, 2013
28. S. K. Senapati, Knowledge Resource Sharing among The Building Research Institutes at a Global Level, International Research Journal of Library & Information Science (ISSN: 2249-0213) , No. 3, 448-558, 2013
29. V. K. Gupta, S. Kumar, R. Singh, L. P. Singh, S. K. Shoora & B. Sethi, Cadmium (II) Ion Sensing through P-Tert-Butyl Calix [6] Arene Based Potentiometric Sensor, Journal of Molecular Liquids, 195, 65–68, 2014.
30. A. K. Mittal, N. Agrawal & V. K. Gupta, Wind Induced Mean Interference Effects on Tall Rectangular Buildings, Journal of Wind and Engineering, 10(2), 1-17, 2013
31. D. P. Kanungo, A. Pain & S. Sharma, Stability Assessment of a Potential Debris Slide in Garhwal Himalayas, India, Indian Landslides, Vol. 6 (2), 9-20, 2013
32. Harpal Singh, A Review of Fire Retardants for Commercially Important Polyurethane Foams, Journal of Construction Engineering, Technology & Management, STM Journals, Vol. 3, No. 3, 1-36, 2013
33. Harpal Singh, Effect of Isocyanurate and Carbodiimide Groups towards the Flammability of Polyurethane Foams, Polyurethanes, Vol. 7, No. 1, 30-37, 2013
34. Harpal Singh, Effect of Synergism and Char Formation on the Fire Retardant Properties of Rigid Polyurethane Foam, Fire Engineer Journal, Vol. 38, No. 2, 7-10, April-June, 2013
35. Harpal Singh, Impact of Nitrogen and Silicone Containing Additives on the Fire Retardancy of Polyurethane Foams, Polyurethanes, Vol. 8, No. 4, 45-49, 2013
36. Harpal Singh, Investigation on Ignition, Pyrolysis and Combustion of Commercially Important Polyurethane Foams, Fire Engineer Journal, Vol. 39, No. 1, 7-11, January-March, 2014
37. Mithalesh K. Dwivedi, Suresh Jain & Neeraj Jain, A PVC-Based Crown Ether Membrane Sensor for Cu2+, Journal of Chemistry and Environment, 17(9), 13-18, 2013
38. Neeraj Jain & Jaswinder Singh, Mass Balancing and Life Cycle Assessment of Municipal Solid Waste, Journal of Chemistry and Environment, 17(5), 13-18, 2013.
39. Neeraj Jain, Immobilization of Hazardous Cr (VI) in Blended Cement: XRD and Leaching Studies, Journal of Chemistry and Environment, 17(10), 28-34, 2013.
40. N.K.Saxena & Sunil K. Sharma, Studies on Generation of Smoke and Toxic Combustion Products from Fire Retarded Materials, Indian Journal of Environmental Protection, 33(2), 145-151, 2013
41. N.K.Saxena & Sunil K. Sharma, Metal Complex Based Coating for Fire Protection of Electric Cables, Paint India, 63 (8) , 53-55, 2013
42. P.C. Thapliyal, Nano Coatings and Paints for Green Future, Nano Digest, 5(4), 42, 2014.
43. Rajni Lakhani, S.P. Agrawal, Sapna Ghai & R.K.Saxena, Å’ek jks/ku gsrq ofeZD;wykbV lhesaV Vkbysaa, Bharatiya Vaigyanik Evam Anusandhan Patrika, Vol 20, Issue – II, 246-250 (published in May 2013).
44. Rajiv Kumar & M.P. Singh, Correlations among Fire Signatures for Detection, Fire Engineer, 39(1), 29-34, January-March, 2014.
45. S. Rukhaiyar, M. Singh & A. Pain, A Study of Numerical Modeling of a Rock Slope Based on Modified Mohr-Coulomb Criterion, Journal of Rock Mechanics and Tunneling Technology, Vol. 19(2), 81-98, 2013.

Conference/Workshop/Seminars

1. Ashok Kumar, Research on Building Materials & Technologies at CSIR-CBRI: An Overview and Possible Areas of Cooperation with BMTPC, National Workshop – cum- Brain Storming Session on Possible Areas of Cooperation on Alternate and Emerging Housing Technologies with BMTPC, New Delhi ,June 12, 2013.
2. Ashok Kumar, Alterative and Innovative Technologies for Social Housing, National Conference on Punchayati Raj and Rural Development, Gujarat State Govt, August 17, 2013.
3. Anirudh Jain, Nivedita Sharma & Ashok Kumar, Restructuring Trees to Accommodate Human Habitat, International Conference on Future Build 2013, University of Bath, United Kingdom, Sept. 4^th – 6^th, 2013, 160-166.
4. Ashok Kumar, Low Cost Housing, National Workshop on Cost Effective Building Practices, Dept. of Architecture, Giani Zail Singh PTU Campus, Bathinda, March 14, 2014.
5. Ashok Kumar, Cost Effective and Innovative Technologies for Housing, National Workshop on Cost Effective Building Practices, Dept. of Architecture, Giani Zail Singh, PTU Campus, Bathinda, March 14, 2014.
6. K. Sharma, A. Dwivedi, P. Chand & S. Singh, A Comprehensive Geotechnical Investigation in Boulder Deposit, Indian Geotechnical Society Conference, IGC 2013 (ISBN : 978-81-925548-1-5)
7. Dwivedi & P. K. S Chauhan, Delineation of Distress Area in Mosque Using GPR, Indian Geotechnical Society Conference, IGC 2013 (ISBN : 978-81-925548-1-5)
8. A. K. Mittal , Prefabricated Technologies for Sustainable Technologies in Hilly Regions, India Prefab, Institute of Engineers (IE), Uttarakhand State Centre, Dehradun, March 8-9 , 1-12, 2014.
9. Abha Mittal, Gayatri Devi & P.K.S.Chauhan, Seismic Hazard Estimation of Jammu Region Using Probabilistic Approach, Indian Geotechnical Conference –2013 on Geotechnical Advances and Noval Geotechnical at IIT- Roorkee, December 22-24, 2013.
10. Abha Mittal, Gayatri Devi & P. K. S. Chauhan, Application of ANN to Predict Liquefaction Potential of Soil Deposits for Chandigarh Region, India, 3^rd International Conference on Soft Computing for Problem Solving (SocPros-13), Greater Noida Extensiion Centre of IIT, Roorkee, December 26-28, 2013.
11. Ajay Chourasia, Development of Generic Engineering Guidelines for Confined Masonry at IIT Gandhinagar, Organised by CEERI (CM Network); IIT Gandhinagar and IIT Kanpur, Feb. 22-23, 2014.
12. A.K. Pandey, Impact Response of RC Beams in Flexure, International Conference on Trends and challenges in concrete structures organized by Indian Concrete Institute at Ghaziabad, UP India, December 19-21, 2013.
13. A.K.Mittal, D. Ghosh, S. Behera, I.A. Siddiqui & D. Dharmshaktu , Wind Flow Simulation in the Vicinity of Tall Buildings through CFD , 8th Asia-Pacific Conference on Wind Engineering (APCWE-8), Dec. 10-14, 682-690, 2013, Chennai, India.
14. A.K. Mittal, S. Behera & D. Ghosh , Role of Tall Buildings in Urban Infrastructure: Research Issues, National Conference on Sustainable Infrastructure Developement (NCSID) jointly organised by Civil Engineering Department of National Institute of Technical Teachers Training and Research (NITTTR), Chandigarh and Chitkara University, Himachal Pradesh , 43-50, March 13-14, 2014.
15. Singh, Natural Fiber Composites for Building Application, International Conference on Composite Materials and Technology, Feb 7-8, 2014, ATIRA, Ahmedabad.
16. C.A. Eldho & S.R. Karade, Cement Based Anodes – Future of Electrochemical Repair Techniques, International Conference on Trends and Challenges in Concrete Structures, organized by Indian Concrete Institute, 714-722, Dec. 19-21, 2013, Ghaziabad, U.P., India
17. Ghosh, A.K. Mittal, S. Behera & A. Gupta , Wind Flow Characteristics around Rooftop Solar Array – A Numerical Study, 8th Asia-Pacific Conference on Wind Engineering (APCWE-8), Dec 10-14, 674-681, 2013, Chennai, India.
18. G. Lavanya, T. Meraj, A. K. Pandey & B. Singh, Developments in SBR Latex Modified Concrete for Structural Applications- A Critical Review, International Conference on Trends and Challenges in concrete structure, Indian Concrete Institute, 19-21 December, 2013, Ghaziabad, UP, India.
19. G. Tiwari, N.K. Samadhiya & A. Pain, Stress Strain Distribution with in Geosynthetic Reinforced Slopes: A Parametric Study, International proceeding of Indian Geotechnical Conference, IIT Roorkee, India , 2013 (Paper ID: 06088101820130429).
20. G. Tiwari, N.K. Samadhiya & A. Pain, Study of Effect of Bolt Anchorage Parameters on Rock Slope Stability by FEM, International proceeding of 4th Indian Rock Conference, 431-439, Solan, India.
21. G. S. Parvathi & P. K. Basudhar, Visco Elastic Foundation Model Parameter Estimation Using Inverse Analysis Technique, Proceedings of the Indian Geotechnical Conference, Dec. 22-24_, 2013, Roorkee
22. Harpal Singh, Effect of Phosphorus-Nitrogen Synergism towards the Flammability of Rigid Polyurethane Foam, National Conference on Fire Research and Engineering (FiRE 2014), Department of Mechanical & Industrial Engineering, Indian Institute of Technology Roorkee, 36, March 1-2, 2014
23. Harpal Singh, Preparation and Properties of Fire Retardant Rigid Polyurethane Foam with Synergistic Charring Agent, International Conference on Polyurethane, PUTECH-2014, India Expo Centre, Greater Noida (New Delhi), India, 2-8, March 12-14, 2014.
24. Koushik Pandit, Ajay Chourasia & S. K. Bhattacharyya, Algorithm Developed by Numerical Approach for Improving Underground Coal Recovery, Indian Geotechnical Conference 2013, Roorkee, December 22-24, 2013.
25. L.P. Singh, Microstructure Improvement of Cementitious Systems Using Nanomaterials: A Key for Enhancing the Durability of Concrete, during CONCREEP@9 at MIT, USA, Sept. 22-25, 2013.
26. L.P. Singh, Preparation of Nanoparticles Using Nano-Powder Synthesizer, 8th Uttarakhand State Science Technology Congress, Dec 26-28, 2013, Dehradun.
27. M. Samanta, R. Bhowmik & P. Mohanty, Analysis of Pile Group Subjected to Embankment Induced Soil Movement, IGC-2013, 114, December 22 -24^th, (Theme- Physical & Numerical Modelling & Soft Computing), Roorkee
28. Mridul Garg and Aakanksha Pundir, Towards Maximizing the Use of Fly Ash as Cementitious Material for Sustainable Building Components, 8^th Uttarakhand State Science Technology Congress (8^th USSTC), 187, 26-28 Dec. 2013, Dehradun
29. N. K.Saxena, Sunil K. Sharma & Sushil Kumar, Fire and Smoke Retardant Compositions for Cotton Fabrics, Fire India 2013, 9^th International Conference and Exhibition, Fire Risk Mitigation: The Global Trends, October 24-26, 2013, Mumbai
30. N. Saxena, C. Sonkar & S. Saxena, An Improved Strengthening Scheme for Stone Masonry Buildings, International Conference on Trends and Challenges in Concrete Structures, organized by ICI, India, 2013, 678-684.
31. N. Saxena, Webbed Slab Substituting Flat Slab & Lintel Band as a Seismic Disaster Reduction Measure, International Conference on Trends and Challenges in Concrete Structures, Organized by ICI, India, 520-529, 2013.
32. P. Kakarla, S. Sharma, D. P. Kanungo, A. Pain & R. Anbalagan, Artifical Neural Network Approach Based Indirect Estimation of Shear Strength Parameters of Soil, International proceeding of Indian Geotechnical Conference 2013, IIT Roorkee, India (Paper ID: 0301774620130328).
33. P. K. S. Chauhan & A. Dwivedi, Investigation for Foundation of a Mosque Minar Using GPR, Indian Geotechnical Society Conference, IGC 2013 (ISBN: 978-81-925548-1-5)
34. P. Chand, , R. Chandra, A.K. Sharma, A. Dwivedi & K.G. Garg, Control of Heave in Expansive Clays by in-Situ Reinforcement, Indian Geotechnical Society Conference, IGC 2013 (ISBN : 978-81-925548-1-5)
35. P. C. Thapliyal, Innovations in Advance Materials for Inclusive Development, Proc. National Conference on Innovations in Science and Technology for Inclusive Development, IL-2, 49, 2014.
36. P. C. Thapliyal, N. Dabas, S. Tewatiya & K. Singh, Nanotechnology for Sustainable Development, Proc. National Conference on Innovations in Science and Technology for Inclusive Development, 72-110, 2014.
37. Ravindra S. Bisht & Soju J. Alexander, Mobile Robots for Periodic Maintenance and Inspection of Civil Infrastructure: A Review, Proceedings of the 1^st International and 16th National Conference on Machines and Mechanisms (iNaCoMM2013), IIT Roorkee, India, Dec 18-20, 2013.
38. Ravindra S. Bisht & Soju J. Alexander, Design Parameter Analysis of Adhesion Mechanisms for Climbing Robots, 8th Uttarakhand State Science and Technology Congress, Dehradun, Dec. 26-28, 2013.
39. R. Bhowmik & M. Samanta , Numerical Analysis of Piled-Raft Foundation Under Vertical Load in Stone Column Improved Soil, IGC-2013, Roorkee, 112, 22-24 December. (Theme- Physical & Numerical Modelling & Soft Computing)
40. S. K. Panigrahi, A. Chaurasia, S. K. Bhattacharyya, Alexander Soju & Parashar Jalaj, Noise Influence on Condition Monitoring of Structures, 8th Uttarakhand State Science and Technology Congress, Dehradun, Dec 26-18, 2013
41. S. Sarkar, D.P. Kanungo, S. Sharma & D. Singh, Potential Landslide Zones along Pipalkoti – Joshimath Road, Alaknanda Valley, Indian Geotechnical Conference, Dec. 22-24, 2013, Roorkee, India
42. S. Behera, A.K. Mittal, S.K. Bhattacharyya, A. Gupta & D. Ghosh, Wind Forces on Inclined Solar Panels on Flat Roofs , 8th Asia-Pacific Conference on Wind Engineering (APCWE-8), Chennai, India, 527-532, Dec 10-14, 2013
43. S. Saxena, C. Sonkar & N. Saxena, Distress Diagnosis by Dynamic Characteristics, International Conference on Trends and Challenges in Concrete Structures, organized by ICI, 598-609, 2013, India.
44. S. S. Pawar, N. Saxena & R. N. Dubey, Design of Earthquake and Wind Resistant High Rise Composite and RC Building Systems, International Conference on Trends and Challenges in Concrete Structures, organized by ICI, 530-539, 2013, India.
45. S. Rukhaiyar, N. K. Samadhiya & A. Pain, Artificial Neural Networks as a Basis for Predicting Polyaxial Strength of Intact Rock, International proceeding of 4th Indian Young Geotechnical Engineers Conference, 29-32, 2013, IIT Madras, India

S. Jain, A. Arvind Kumar & R. S. Chimote, Numerical Simulation of Water Mist Velocity Distribution Using Computational Fluid Dynamics, National Conference on Fire Research & Engineering: FiRE 2014, Department of Mechanical & Industrial Engineering, IIT Roorkee with sponsorship from the BARC, March 1-2, 2014, Roorkee.

Journals

1. Ashok Kumar, Rajni Lakhani, S. K. Bhattacharyya & Sapna Ghai, Low cost construction technology for cold climate: case study of Ladakh region, International Journal of Science Technology and Management, Vol. 3, Issue 1, April 2012
2. Ashok Kumar & B. M. Suman, Experimental evaluation of insulation materials for walls and roofs and their impact on indoor thermal comfort under composite climate, International Journal of Building & Environment, Vol. 59, 635-643, 2013
3. A. K. Pandey, Discussion paper 108/M48, Factors affecting bond between new old concrete, ACI Materials Journal, Vol.109 (3), May 2012
4. B. M. Suman & V. K. Sharma, Thermal behaviour of EPS concrete, The Indian Concrete Journal, Vol. 86, No. 6,56-59, June 2012
5. B. Singh, L. Kumar, M. Gupta, M. Chauhan & G. S. Chauhan, Effect of activated crumb rubber on the properties of crumb rubber modified bitumen, Journal of Applied Polymer Science, Vol. 129, 2821-2831, Published Online-2012, USA.
6. B. Singh, L. Kumar, M. Gupta & G. S. Chauhan, Polymer modified bitumen of recycled LDPE and maleated bitumen, Journal of Applied Polymer Science, Published Online 2012, Vol.127, 67-78, 2013, USA, DOI: 10.1002 /app. 36810.
7. B. S. Rawat, Scope of green termiticide in buildings, Pestology, Vol. XXXVI (7), 25-28, July 2012
8. B. S. Rawat, Search of suitable physical barrier for termite management in buildings, Ann. Entomol, 30(2), 1-8,April 2012
9. B.S. Rawat, Effectiveness of fipronil 2.5 E.C. for termite management in buildings, Pestology, XXXVI (8), 19-24,July 2012
10. D. P. Kanungo, A. Pain & S. Sharma, Finite element modelling approach to assess the stability of debris and rock slopes-A case study from the Indian Himalayas, Natural Hazards, 2013, DOI:10.1007/s11069-013-0680-4.
11. Harpal Singh, Advances in halogen-based fire retardant additives for polyurethane foams, Polyurethanes today, Vol. 6(2), 36-39, June 2012
12. Harpal Singh, Characterization of smoke and toxicity from burning polyurethane foams, Fire engineer, Vol. 37(2) , 19-23, April 2012
13. Harendra Kumar, M. P. Singh & P. K. Yadav, Optimal tasks assignment for multiple heterogeneous processors with dynamic re-assignment, International Journal of Computers & Technology, Vol. 4, No 2, 528-535, March 2013
14. K. B. Ladhane, Pradeep Kumar & V. A. Sawant, Field investigations on GAP system subjected to tensile force, Entire Research, Vol. 4(2), 1-4, April 2012
15. L. P. Singh, S. K. Bhattacharyya, P. Singh & S. Ahalawat, Granulometric synthesis and characterisation of dispersed nanosilica powder and its application in cementitious system, Advances in Applied Ceramics, Vol. 111, No.4, 220-227, May 2012
16. L. P. Singh, S. K. Bhattacharyya, G. Mishra & S. Ahalawat, Reduction of calcium leaching in cement hydration process using nanomaterials, Journal of Materials Technology, Vol. 27, No.3, 233-238, July 2012
17. L. P. Singh, S. K. Bhattacharyya & S. Ahalawat, Preparation of size controlled silica nano particles and its functional role in cementitious system. Journal of Advanced Concrete Technology, Vol. 10, 245-352, 2012
18. Manju Mittal, Dust explosion violence measurement with 20-L spherical vessel, Chemical Products Finder, Vol.31 No.5, Oct. 2012.
19. Manju Mittal, Electrostatic ignition hazards in industries, Chemical Engineering World, Vol. 47, No.11, 47-49, Nov. 2012
20. Manju Mittal, Explosion hazards in maize starch plant and safety measures, Chemical Engineering World, Vol.47, No.12, 74-78, Dec. 2012
21. Manju Mittal, A. A. Ansari, Rakesh Kumar & Sushil Kumar, Safety in pneumatic transport of powder, Chemical Engineering World, Vol.47, No.4, 58-65, April 2012
22. Monika Chauhan, M. Gupta, B. Singh, A. K. Singh & V. K. Gupta, Pine needle/isocyanate composites- Dimensional stability, biological resistance, flammability and thermo- acoustic characteristics, Polymer Composites, Vol. 33(3), 324-335, 2012, USA
23. Mridul Garg & Aakanksha Pundir, Comprehensive study of fly ash binder developed with fly ash- alpha gypsum plaster- Portland Cement, Construction and Building Materials, Vol. 37, 758-765, 2012
24. Neeraj Jain, A. K. Minocha & J. Singh, Air dispersion modelling of brick kilns: Sitting criteria and good housekeeping practices for brick industry in Uttar Pradesh, Indian J. Environmental Protection, Vol. 32 (4), 276-282, April 2012
25. P.K.S. Chauhan. & Y. Pandey, Feasibility of seismic alert system in India, NED University Journal of Research, Karachi, Thematic Issue on Earthquake 2012, 35-44,Oct. 2012
26. P. Pal & S. K. Bhattacharyya, Slosh dynamics of liquid filled composite containers- A two dimensional mesh less local Petrov-Galerkin approach, Journals of Fluids & Structures, March 2013.
27. Pratima Dhoke, Ravi Bhargava & Shorab Jain, A comparative analysis of the provisions of smoke control systems in buildings of national building code of India with other international building codes, International Journal of Engineering and Scientific Research, Vol. 4( 2), Feb. 2013, Houston, TX, USA
28. Ramkrishna Dandapat, Arghya Deb & S. K. Bhattacharyya, Localised failure in fibre reinforced- Polymer wrapped cylindrical concrete columns, Journal of ACI, Structural Engg. , Vol. 109, Issue.4, July 2012
29. Rajiv Kumar & Vatsal Agarwal, Species concentrations-Temperatures and velocities in fire plumes, Journal of Applied Fire Science, Vol. 22(3), 239-258, March 2013
30. Rajiv Kumar, R. K. Sharma, P. K. Yadav & A. K. Gupta, Use of fire models in post fire investigations-A case study, Journal of Applied Fire Science, Vol. 22(3), 259-277, March 2013
31. Sagar Gulati, P. K. Yadav & K. Bhatia, A reliability model for the task scheduling in distributed systems based on fuzzy theory, CIIT International Journal of Networking and Communication Engineering, Vol. 4 (11), 684-688, August 2012
32. S. K. Senapati & Jagtar Singh, Ethical concerns in librarianship- Basic issues, PEARL- Journal of Library & Information Science, Vol. 6, No. 2, 65-69, June 2012
33. S. K. Panigrahi, S. Chakraverty & B. K. Mishra, Damage identification of multi storey shear structure from sparse modal information, ASCE-Journal of Computing in Civil Engineering, Vol. 27, No. 1, 1-9, Jan 2013
34. S. K. Agarwal, Vivek Sood & L. P. Singh, Chemically activated blended cements as sustainable cements, NBM&CW, 196-201, Nov. 2012
35. S. Kanodia & P. C. Thapliyal, Green synthesis of thiophenyl-1,4-naphthoquinones, J. Ind. Chem. Soc. , Vol. 89(6), 833-836, 2012
36. S. Sarkar, D. P. Kanungo & S. Kumar, Rock mass classification and slope stability assessment of road cut slopes in Garhwal Himalayas, India ,Geotechnical and Geological Engineering, Vol. 30 (4), 827-840, 2012
37. Subham Dastidar, Ravi Chahar, Vivekananda Bal, Satyendra Kumar & Siddhartha Panda, Fabrication of meso and nanotextured silica surfaces for tuneable densities of functionalized molecules, Colloids and Surfaces- A Physicochemical and engineering aspects, Volume 412, 38-46, 2012
38. Vivek Sood, S. K. Agarwal & A. Diwedi, Comparative study of pozzolanic activity of ultra fine pozzolana, International Journal of Multi Research Academy, Vol. 2, 512-524, Oct. 2012
39. Vivek Sood & S. K. Agarwal, Hydration behaviour of fly ash/slag based composite cement, International Journal of Multi Research Academy, Vol. 02, 195-212, Oct. 2012
40. V. K. Gupta, L. P. Singh, R. Singh & S. P. Kaur, A novel copper (II)- PVC membrane potentiometric sensor based on Dimethyl 4,4’ -(o-phenylene) bis (3- thioallophanate), Journal of Molecular Liquids, 174, 11-16, 2012.

Conferences/seminar/workshops

1. Amit Kush, Amod Krishna & P. K. Bhargava, Energy efficiency through ICT adoption for sustainable habitat, National Conference on Emerging Trends of Energy Conservation in Buildings, Nov. 1-3, 2012 , 120-125, CSIR-CBRI, Roorkee
2. A. D. John, A. K. Roy & A. Gairola, Wind loads on walls of low-rise building, 6th National Conference on Wind Engineering (NCWE), December 14-15, 2012, CSIR – CRRI, New Delhi
3. A. Ghosh, P. K. S. Chauhan, S. K. Jain, Dalip Kumar & Z. Ahmed, Holistic study on site characterization for habitat development, Indian Geotechnical Conference (IGC 2012), Dec. 13–15, 2012, New Delhi
4. Achal Mittal, Rajeev Kumar Sharma, I. A. Siddiqui, Deepak Dharamshaktu & P. K. Yadav, State of the art wind tunnel facility – A review for up-gradation, 6th National Conference on Wind Engineering (NCWE-2012), Vol. 2, December 14-15, 2012, 525-539, CSIR-CRRI, New Delhi
5. Ajay Chourasia, S. K. Singh & Jalaj Parashar, Health assessment of building using vibration characteristics ,28th National Convention of Civil Engineers & National Seminar on Role of Infrastructures for Sustainable Development, Oct. 12-14, 2012, IEI, Roorkee
6. Ajay Chourasia, S. K. Singh & S. K. Bhattacharyya, Failure analysis of structures: Case studies, 28th National Convention of Civil Engineers & National Seminar on Role of Infrastructures for Sustainable Development, Oct. 12-14, 2012, IEI, Roorkee
7. Ajay Chourasia, S. K. Singh & Jalaj Parashar, Seismic rehabilitation of heritage structures, Problems & prospects, 15th Sym. on Earthquake Engineering, ISET, Oct. 20-21, 2012
8. Ajay Chourasia, Jalaj Parashar, S. K. Bhattacharyya & S. K. Singh, Non-destructive tests for masonry structures, 15th Sym. on Earthquake Engineering, ISET, Oct. 20-21, 2012
9. Ajay Chourasia, Y. P. Kajale & J. Parashar, Prefab building construction for sustainable development, National Conference on Trends and Recent Advances in Civil Engineering (TRACE-2012), September 27, 2012, Amity School of Engineering & Technology, New Delhi
10. A. K. Roy & P. K. Bhargava, CFD modelling of wind flow around building for wind energy conversion, National Conference on Emerging Trends of Energy Conservation in Buildings (EECB-2012), Nov. 1-3 , 2012, 370-379, CSIR– CBRI, Roorkee
11. A. K. Roy, Nagesh Babu & P. K. Bhargava, Atmospheric boundary layer air flow through CFD simulation on pyramidal roof of square plan shape buildings, 6^th National Conference on Wind Engineering (NCWE), December 14- 15, 2012, CSIR – CRRI, New Delhi
12. A. K. Pandey & R. S. Bisht, Numerical modelling of in-filled clay brick masonry under blast loading , First International Conference on Performance Based & Life Cycle Structural Engineering (PLSE-2012), December 5-7, 2012, Hong Kong, China
13. Ashok Kumar, P. S. Chani & Rajesh Deoliya, The estimation of energy consumption due to building construction in India- Present status & future directions, International Conference on Advanced Materials for Energy Efficient buildings, , Feb. 13-15, 2013, 140-142, New Delhi
14. Ashok Kumar, P. S. Chani & Rajesh Deoliya, Comparative analysis of building sustainability assessment tolls & identifying key attributes for green retrofits, Published in National Seminar held at The Institution of Engineers (India), Oct. 12-14, 2012, 209-220, Roorkee
15. Ashok Kumar, P. S. Chani, Rajesh Deoliya, Rajni Lakhani & Naresh Kumar, Comparative assessment of energy requirements and carbon footprint for different types of building materials and construction techniques, National Conference on Emerging Trends of Energy conservation in Buildings, Nov.1-3, 2012, 63-71, CSIR-CBRI, Roorkee
16. B. M. Suman, Energy simulation for sustainable building with application of roof and wall insulation, National Conference on Emerging Trends of Energy Conservation in Buildings, Nov. 1-3, 2012, CSIR-CBRI, Roorkee
17. B. Singh, M. Gupta & Monika Chauhan, Pine needles- An alternate raw material for board manufacturing, International Conference on Advanced Materials for Energy Efficient Buildings, 13-15 Feb. 2013, New Delhi
18. Debdutta Ghosh & Achal Mittal, A review on pedestrian wind comfort around tall buildings, 6th National Conference on Wind Engineering (NCWE-2012), Vol. 2, December 14-15, 2012, CSIR-CRRI, New Delhi
19. D. P. Kanungo, A. Pain, S. Sarkar, S. Sharma, S. K. Jain, & Z. Ahmad, Field investigation and finite element modelling of a progressive debris slide in the Indian Himalayas, International Conference on Debris Flow 2012, May 29-31, 2012, Dubrovnik, Croatia
20. D.V.M. Bhaskar & S. R. Karade, Corrosion monitoring of reinforced concrete structures, Proc. 28th National Convention of Civil Engineers, Oct. 2012, IEI, Roorkee
21. Harpal Singh, Additives filled rigid polyurethane foam- A fire retardant and energy efficient building material, Proceedings of National Conference on Emerging Trends of Energy Conservation in Buildings, Nov. 1-3, 2012, CSIR-CBRI, Roorkee
22. H. K. Jain, P. K. Bhargava & Shiv Lal, Passive cooling of buildings, National Conference on Emerging Trends of Energy Conservation in Buildings, Nov. 1-3, 2012, CSIR-CBRI, Roorkee
23. I. A. Siddiqui, R. K. Sharma & D. S. Dhramshaktu, Planning and fabrication of model for wind tunnel study– A Technical Approach, 6th National Conference on Wind Engineering, December 14-15, 2012, CSIR-CRRI, New Delhi
24. Koushik Pandit, Ajay Chourasia & S. K. Bhattacharyya, Pillar design practices in coal mines, 28th National Convention of Civil Engineers & National Seminar on Role of Infrastructure for Sustainable Development, October 12-14, 2012, IEI, Roorkee
25. K. C. Panda, S. K. Bhattacharyya & S. V. Barai, Experimental investigation on shear strengthening of RC T-beams with GFRP sheet in shear zone, International Conference on Sustainability Challenges & Advances in Concrete Technology (SCACT 2012), May 2-4, 2012, Coimbatore, Tamilnadu
26. K. C. Panda, S. K. Bhattacharyya & S. V. Barai , Strain analysis of RC T-beams side bonded in shear with GFRP sheet, Proceedings of International Conference on Rehabilitation and Restoration of Structures (BTCM 2013), February 13-16, 2013, Building Technology and Construction Management division, Department of Civil Engineering, IIT Madras ,Chennai
27. K. C. Panda, S. K. Bhattacharyya & S. V. Barai , FRP strengthened reinforced concrete beams – A brief overview on shear strength models, UKIERI Concrete Congress Innovations in Concrete Construction (UCC 2013), March 5-8, 2013, NIT, Jalandhar
28. L. P. Singh, S. K. Bhattacharyya, U. Sharma, G. Mishra & S. Ahalawat, Role of silica nanoparticles on early stage reactivity of cementitious system, 7th Uttarakhand State Science Technology Congress – 2012, November 21-23, 2012, Dehradun
29. L. P. Singh, S. K. Bhattacharyya & S. Ahalawat , Comparative mineralogical and morphological aspects of C-S-H using silica nanoparticles, 4th International Symposium on Nanotechnology in Construction (NICOM4), May 20-22, 2012, Greece
30. M. P. Singh, P. K. Yadav & A Aggarwal, Response time optimization of grid computing system using genetic approach, National Conference on Recent Advances in Mathematics and its Applications (RAMA-2013), Feb. 14-16, 2013,171-179, Department of Applied Mathematics, Indian School of Mines, Dhanbad
31. Mridul Garg & Aakanksha Pundir, Energy-efficient high strength binder from by-product gypsum, 7th Uttarakhand State Science Technology Congress (7^th USSTC), Nov. 21-23, 2012, 158, Dehradun
32. Mridul Garg, A. K. Minocha, S. Maiti & A. Pundir, Development of energy efficient and eco-friendly construction materials from gypsum cement, International Conference on Advanced Materials for Energy Efficient Buildings, Feb 13-15, 2013, 81, CSIR-CBRI, Roorkee
33. Mridul Garg, A. K. Minocha, J. Singh, N. Jain, S. Maiti & A. Pundir, Recycling and reuse of construction and demolition waste in tiles, International Conference on Advanced Materials for Energy Efficient Buildings, Feb 13-15, 2013, 74, CSIR-CBRI, Roorkee
34. Nikhil Aggarwal, Achal Mittal & V. K. Gupta, Comparison of steel quantity for gable frame based on wind forces from a few International wind codes, 6th National Conference on Wind Engineering (NCWE-2012), Vol. 2, December 14-15, 2012, CSIR-CRRI, New Delhi
35. Nikhil Aggarwal, Achal Mittal & V. K. Gupta, Along wind interference effects on tall building, 6th National Conference on Wind Engineering (NCWE-2012), Vol. 1, December 14-15, 2012, CSIR-CRRI, New Delhi
36. Nagesh B. Balam & P. K. Bhargava, Solar energized liquid desiccant air conditioning –A review, National Conference on Emerging Trends of Energy Conservation in Buildings, Nov 1-3, 2012, CSIR-CBRI, Roorkee
37. Narendra Kumar, S. K. Saini & Sameer, Partial replacement of heat energy by solar energy in the production of Gypsum Plaster, National Conf. on Emerging Trends of Energy Conservation in Buildings, Nov 1-3, 2012, CBRI, Roorkee
38. Omna Suman & B. M. Suman, Thermal insulation materials for energy efficient building, National Conference on Emerging Trends of Energy Conservation in Buildings, Nov 1-3, 2012, CSIR-CBRI, Roorkee
39. P. C. Thapliyal & S. R. Karade. Studies on Physico-Mechanical behaviour of thermal insulating coatings for Buildings. International Conference on Advanced Materials for Energy Efficient Buildings (AME²B-2013), Feb. 13-15, 2013, 52, India Habitat Centre, New Delhi
40. P.C. Sharma, Rajeev Goel, S. K. Singh & Suraj Parkash, Construction of large shankh shaped ferro cement structure: A case study, 28th National Convention of Civil Engineers & National Seminar on Role of Infrastructures for Sustainable Development, Oct. 12-14, 2012, IEI, Roorkee
41. P. K. Bhargava, Nagesh Babu Balam & A. K. Roy, Passive design features for energy conservation in residential buildings, National Conference on Emerging Trends of Energy Conservation in Buildings (EECB-2012), November 1-3, 2012, 293-302, CSIR – CBRI, Roorkee
42. P. K. Bhargava, Nagesh B. Balam & H. K. Jain, Climate change assessment due to buildings & construction industries and its impact on water resources, 3^rd Annual Int. Symposium on Response of Asian Rivers to Climate Change- Past, Present and Future Scenario, Nov. 14-16, 2012, CSIR- NGRI, Hyderabad
43. P. K. Bhargava & Nagesh B. Balam, Studies on wind climate in India, 6^th National Conference on Wind Engineering (NCWE), Dec. 14-15, 2012, CSIR-CRRI, New Delhi
44. P. K. Yadav & B. M. Suman, Prediction of indoor thermal comfort level using fuzzy logic, National Conference on Emerging Trends of Energy Conservation in Buildings, Nov. 1-3, 2012, 380-388, CSIR-CBRI, Roorkee
45. Rajni Lakhani, S. P. Agrawal & Sapna Ghai, Development of energy efficient material from vermiculite, National Conference on Emerging Trends of Energy Conservation in Buildings, Nov. 1-3, 2012, CSIR-CBRI, Roorkee
46. Rajiv Kumar & Vinod Kumar, Development of integrated solar photovoltaic-thermal system, Proceedings-National Conference on Emerging Trends of Energy Conservation in Buildings, Nov. 1-3, 2012, CSIR-CBRI, Roorkee
47. R. S. Chimote, Shashi & Surendra Kumar, Liquid hydrocarbon pool fire suppression: Part-I:-experiments using direct foam injection (DFI)-methodology in a 5m² x 2m-cylindrical tank, International Conference on Safety, Oct. 12-13, IIT, Gandhinagar.
48. S. K. Singh, Post fire investigations and rehabilitation of structure- A case study, International Workshop on Innovations in Repair and Rehabilitation of Structures, Dec. 17-18, 2012, ICI, Ghaziabad
49. S. K. Singh & S.K. Bhattacharyya, Hybrid fibre reinforced concrete- A paradigm shift, International Conference on Advanced Materials for Energy Efficient Buildings, Feb. 13-15, 2013, IHC, New Delhi
50. S. K. Singh, Ajay Chourasia, M. M. Dalbehra & S. K. Bhattacharyya, Hybrid fibre reinforced concrete- A review, 28th National Convention of Civil Engineers & National Seminar on Role of Infrastructures for Sustainable Development, Oct. 12-14, 2012, IEI, Roorkee
51. S. K. Singh, M. M. Dalbehra & S. K. Bhattacharyya, Behaviour of hybrid fibre reinforced concrete exposed to Fire, 28th National Convention of Civil Engineers & National Seminar on Role of Infrastructures for Sustainable Development, 2012, IEI, Roorkee
52. S. K. Panigrahi, V. P. Kommula & C. Ketlogetswe, A mathematical model for assessment of physical properties of flyash-sand-cement bricks, Proceedings of the IA STED International Conference Modelling and Simulation (Africa MS 2012), Sept. 3-5, 2012, Botswana, Africa
53. S. K. Panigrahi, Narendra Kumar & Sameer, Underground horizontal drilling-A trenchless technology, 28th National Convention of Civil Engineers & National Seminar on Role of Infrastructure for Sustainable Development, Oct. 12-14, 2012, IEI, Roorkee
54. S. K. Agarwal, Vivek Sood & Ashok Kumar, Composite cement-A step towards reduction in green house gas emission, 2nd International Conference on Green Buildings Technologies & Materials (GBTM 2012), Dec. 27-28, 2012, Wuhan, China.
55. S. K. Bhattacharyya, Health monitoring of buildings subjected to wind loads, 6th National Conference on Wind Engineering (NCWE-2012), 79-84, December 14-15, 2012, CSIR-CRRI, New Delhi
56. S. K. Bhattacharyya & Ajay Chourasia, Experiences on 2011: Sikkim post-earthquake damage assessment-Strategies for risk reduction, ISET Golden Jubilee Symposium, October 20-21, 2012, Roorkee
57. S. R. Karade, Investigation of concrete structures in thermal power plants: Some case studies, Proc. International Workshop on Innovations in Repair and Rehabilitation of Structures, Dec. 17-18, 2012, ICI, Ghaziabad
58. S. R. Karade, Corrosion control in steel reinforced concrete structures for sustainability, Proc. 28th National Convention of Civil Engineers, Oct. 2012, Roorkee
59. S. R. Karade & P. C. Thapliyal, Energy efficient corrosion control measures in steel reinforced concrete structures, International Conference on Advanced Materials for Energy Efficient Buildings (AME²B-2013), Feb. 13-15, 2013, 24, India Habitat Centre, New Delhi.
60. S. P. Agrawal, B. M. Suman & Rajni Lakhani, Comparative studies on two different methods of thermal conductivity measurements, National Conference on Emerging Trends of Energy Conservation in Buildings, Nov. 1-3, 2012, CSIR-CBRI, Roorkee
61. S. P. Agrawal & B. M. Suman, Value added R&D insulating materials from waste, Proc. National Conference on Emerging Trends of Energy Conservation in Buildings, Nov. 1-3, 2012, CSIR-CBRI, Roorkee
62. Soumitra Maiti, Mridul Garg, Aakanksha Pundir & A. K. Minocha, Flue gas desulfurization gypsum for production of building components, International Conference on Advanced Materials for Energy Efficient Buildings, Feb 13-15, 2013, 83, CSIR-CBRI, Roorkee
63. Sriniwasrao Naik B, L. P. Singh, P. C. Thapliyal & Ashok Kumar, Studies on phase change materials for energy efficient buildings, International Conference on Advanced Materials for Energy Efficient buildings, Feb. 13-15, 2013, 30-32, New Delhi.
64. Siddharth Behera & Achal Mittal, A comparative study of wind forces of tall building and towers as per IS 875-Part-III (1987) and draft code (2011) using gust factor method, 6th National Conference on Wind Engineering (NCWE-2012), Vol. 2, Dec. 14-15, 2012, CSIR-CRRI, New Delhi
65. Suvir Singh, Fire safety in high rise buildings, National Seminar on Disaster Management , Nov. 2012, RGEC,Meerut
66. Shiv Lal, S. C. Kaushik & P. K. Bhargava, A study on stack ventilation system and integrated approaches, National Conference on Emerging Trends of Energy Conservation in Buildings, Nov. 1-3, 2012, CSIR-CBRI, Roorkee
67. Vivek Sood, Ashok Kumar & S. K. Agarwal, Impact of sustainable cements on conservation of energy in buildings, National Conference on Emerging Trends of Energy conservation in Buildings, Nov.1-3, 2012, 88-95, CSIR-CBRI, Roorkee.

Y. P. Kajale, J. Parashar & Ajay Chourasia, Energy efficient building technologies: An approach towards sustainable development, Conference on Emerging Trends on Energy Conservation in Buildings, November 1-3, 2012, CSIR-CBRI, Roorkee.

Journals

1. A. K. Pandey, An iterative approach for curvature ductility of RC beams at high strain rates, Journal of Structural Engineering, Vol. 38(4) , 307-317, 2011.
2. Ajay Chourasia, S.K. Bhattacharyya, Confined masonry: A solution for seismic resistant construction, BMTPC Newsletter, special issue., 30-37, October 2011.
3. A. Ghosh, S K Jain, Ajay Singh & Dalip Kumar, Human Settlement on Abandoned Ash Pond – A Case History, Geotech. Hanoi, 2011-ISBN978-604-82-000-8, ID No1/118-ID No8/118.
4. B. M. Suman, Energy simulation of a single zone building determining indoor air temperature, International Transaction in Mathematical Sciences and Computers, Vol.4, No.2, 231-242, July-Dec. 2011.
5. B.Singh, Lokesh Kumar, M.Gupta and G.S.Chauhan, Polymer modified bitumen of recycled LDPE and maleated bitumen, Journal of Applied Polymer Science 2012, DOI: 10.1002/app.36810 (Online) USA.
6. D.P. Kanungo, S. Sarkar, S. Sharma, Combining neural network with fuzzy, certainty factor and likelihood ratio concepts for spatial prediction of landslides, Natural Hazards, Vol. 59 (3), 1491-1512, 2011.
7. D.P. Kanungo, and S. Sarkar, Use of multi-source data sets for land use/land cover classification in a hilly terrain for landslide study. Disaster & Development, Vol. 5 (1), 35-51, 2011.
8. L. P. Singh, S. K. Bhattacharyya, P. Singh and S. Ahalawat, Granulometric synthesis and characterisation of dispersed nanosilica powder and its application in cementitious system, Advances in Applied Ceramics 111(4), 220-227,2012.
9. L. P. Singh, S. K. Bhattacharyya and S. Ahalawat, Application of nanotechnology in cement based materials, Nano Digest, CSIR Special Issue, 2011
10. M. Chauhan, M. Gupta, and B. Singh, Pine needle/isocyanate composites: Performance and durability, Polymer Composites, V 33, No. 3, 324-335, 2012, USA.
11. M. Pal, Rajesh K. Verma and S K Tewari, Anti-termite activity of essential oil and its components from Myristica fragrans against Microcerotermes beesoni, Journal of Applied Science and Environmental Management, (Nigeria), 15: 559-561, 2011.
12. M. Gupta, and A K Pandey, Experimental studies on brick masonry in compression, The Indian Concrete Journal, Vol 86(1), 49-55, 2012.
13. Neeraj Jain, J. Singh, A. K. Minocha, A.B. Akolkar and M. K. Choudhury, Integrated municipal solid waste management – A case study, Indian J. Environmental Protection, 31(11), 907-915, 2011.
14. Neeraj Jain, Effect of non pozzolanic and pozzolanic mineral admixtures on the hydration behavior of ordinary Portland cement, Construction & Building Materials, 27(1), 39-44, 2012.
15. N. K. Saxena, Sunil K. Sharma and Sushil Kumar, Fire protection of cellulosic lining materials, Fire Engineer, 30-32, Vol. 36(2) April-June 2011.
16. N. K. Saxena, Sunil K. Sharma and Sushil Kumar, Cable fire stop system- A fire protection measure for cable galleries, Electrical India, 152-159, Vol 51(11), Nov. 2011
17. P.C.Thapliyal, Nanotechnology based coatings: Innovation and collaboration, Nano Digest, 3(5), 46, 2011.
18. P.K. Yadav & Nadeem Ahmad, Performance analysis of heterogeneous distributed processing system through systematic allocation of task, International Journal of Intelligent Information Processing, ISSN : 0973-3892, Vol. 5(1), January-June, 19-24, 2011.
19. Richa Singh and S. P. Agrawal, Ecopots consolidated, in e-journal Science Tech entrepreneur, Bhopal, 2011
20. Rajiv Kumar and Sunil K. Sharma, Toxicants in compartment fires, Fire Engineer, 13-22, Vol. 36(2), April-June 2011
21. Rajni Lakhani, Anupam Singh and Lalit Kumar, Preparation and characterization of polymer blend used as consolidant, International Journal of Science, Technology and Management, Vol.2, issue 3, July 2011.
22. Richa Singh, and S. P. Agrawal, Review on bio-degradable composites for buildings, Journal of Civil Engineering & Construction Review, New Delhi, 24, 10, 100-106, October 2011.
23. Rajesh K. Verma, L. Chaurasia and M. Kumar, Antifungal activity of essential oils against selected building fungi, Indian Journal of Natural Product Research, 2: 448-451, 2011.
24. Rajesh K. Verma, L. Chaurasia and M. Kumar, Fungal deterioration in buildings, Biozone International Journal of Life Sciences, 3:420-429, 2011.
25. R.S. Chimote, Shashi, Surendra Kumar and Reshu Sharma, System design considerations for halon-alternative clean fire extinguishants w.r.t. Emerging fire hazard scenarios, Fire Engineer , Vol. 37, No. 1 , 7-14, 35-39; Jan-March 2012, The Institution of Fire Engineers, New Delhi.
26. S.K. Agarwal, L.P.Singh, Vivek Sood, G. Mishra and S. Ahlawat, Effect of blended flyash on the compressive strength of cement paste, Concrete Research Letter, 4, Vol.2, 336-345, Dec. 2011.
27. Sapna Ghai, Rajni Lakhani and S. P. Agrawal, A review on consolidants for repair of deteriorated structures, New Building Materials & Construction World, 190-196, February 2012.
28. S.K Panigrahi., V.P Kommula., C. Ketlogetswe, Design and Development of a Low Cost Brick Making Machine for Producing Fly ash-Sand-Cement Bricks, International Journal of Manufacturing Science and Engineering, Vol. 2(1), 47-51, 2011.
29. S. Sarkar, D.P. Kanungo and S.Kumar, Rock mass classification and slope stability assessment of road cut slopes in Garhwal Himalayas, Indian Geotechnical and Geological Engineering, DOI 10.1007/s10706-012-9501-x. 2012.
30. S. Sarkar, D.P. Kanungo and P.K.S. Chauhan, Varunavat landslide disaster in Uttarkashi, Garhwal Himalaya, India. Quarterly Journ. Engineering Geology and Hydrogeology, Vol. 44, 17-22, 2011.
31. V. P. Kommula, S.K Panigrahi and C. Ketlogetswe, Utilization of fly ash for building industries in Botswana: Present scenario and future, International Journal of Environment Development, Vol. 8(2), 123-129, 2011

Conferences/seminar/workshops

1. A. A. Ansari, Sunil K. Sharma, Harpal Singh and Rakesh Kumar, Fire propagation index & heat release studies of plywood treated with chemical surface barrier, Proceedings of conference on Fire Science and Technology- Research & its Implementation, 44-55, CSIR-CBRI, 3^rd -4^th November 2011.
2. A. A. Ansari, M. P. Singh, Sourabh Jain and Rakesh Kumar, Study on deterioration of visibility due to smoke for some materials used in railway industries, Proceedings of conference on Fire Science and Technology- Research & its Implementation, 141-146, CSIR-CBRI, 3^rd -4^th November 2011
3. Abha Mittal, Shaifaly Sharma, and D P Kanungo, A comparison of ANFIS and ANN for the prediction of Peak Ground Acceleration in Indian Himalayan region. In: K. Deep et al. (Eds.): Proc. of the International Conf. on SocPros, AISC 131, 457-468, 2011.
4. A.Ghosh, S.Sarkar, D.P.Kanungo, S.K.Jain, Dalip Kumar and Zamir Ahmad, Control measures design for Agrakhal unstable slope, Proc. National Conference on Landslide hazard-Consequences and Challenges, Sept. 2011, CSIR-CBRI, Roorkee, 177-184, 2011.
5. A. Ghosh, M. Samanta, S. Sharma, S K Jain & Dalip Kumar, Estimation of unconfined compressive strength of cement treated soft Indian coastal clay, Proceed. Of Indian Geotechnical Conference, Dec. 15 -17, 2011, Kochi ( Paper No. S-323 ).
6. A K Pandey and R. Deoliya, Investigation of distress and rehabilitation of a distressed historical building, National Conference on Repair and Rehabilitation of Concrete Structures, Noida, UP, India, May 6-7, 425-433, 2011.
7. A K Pandey, Ram Kumar and D K Paul, Reinforced concrete containment shell under impact and blast loading, Transactions, SMiRT 21, 6-11 November 2011, New Delhi, India, Div-V: Paper ID#160.
8. B. M. Suman and Sandeep Kumar, Effect of fire exposure to a semi-infinite plate on unexposed surface temperature , Proceedings Fire Science and Technology – Research and its implementation, held at CBRI, Roorkee during Nov 03-04(2011), 259-265,.
9. B.Singh, Utilization of flyash for making building materials, Seminar on Fly ash utilization, 22 July, 2011, Bidyut Unnayan Bhavan, Kolkata
10. B. Singh, Sarika Sharma, M.Gupta and S.K. Bhattacharyya, Performance of fly ash based geopolymer pastes under chemical environment, International Conference on Advances in Construction Materials Through Science and Engineering, 5-7 Sept. 2011, Hong Kong SAR, China.
11. B. Singh, Simmi Tyagi, M. Gupta and S.K. Bhattacharyya, Improvement in pozzolanic reactivity of coarse fly ash by mechano-chemical method, International Conference on Advances in Construction Materials Through Science and Engineering, 5-7 Sept. 2011, Hong Kong SAR, China.
12. B. Singh, M. Gupta, Monika Chauhan and A. Randhawa, Jute composites using unsaturated polyester -polyurethane IPN system, National Seminar on Frontiers in Polymer Science, 18-19 Nov. 2011, H.P. Univ. Shimla.
13. D.P. Kanungo, Y. Pandey, P.K.S. Chauhan, S. Sarkar, Zamir Ahmad, O. P. Sahu & Sandeep Kumar, Surface movement monitoring of Tangni landslide, Garhwal Himalaya, Proc. National Conference on Landslide hazard-Consequences and Challenges, Sept. 2011, CSIR-CBRI, Roorkee, 148-157, 2011.
14. Harpal Singh, Sunil K. Sharma, A. A. Ansari, Rakesh Kumar and M. P. Singh, Flammability performance of rigid polyurethane foam: use of different blowing agents, Proceedings of conference on Fire Science and Technology- Research & its Implementation, CSIR-CBRI, 24-34, 3^rd -4^th November 2011.
15. Jawad Farooqui, Shorab Jain, Shashi, Surendra Kumar, M. P. Singh, Performance based fire safety design: Estimation of movement time for evacuation using evacnet-4, Proceedings of conference on Fire Science and Technology- Research & its Implementation, 146-160, CSIR-CBRI, 3^rd -4^th November 2011
16. L. Kumar, M. Gupta, B. Singh and G.S.Chauhan, Bitumen modification with activated crumb rubber, National Seminar on Frontiers in Polymer Science, 18-19 Nov. 2011, H.P. Univ. Shimla.
17. M. P. Singh, A. A. Ansari, Shorab Jain, N.S.Tyagi, Sushil Kumar, and Rakesh Kumar, Visibility of photo luminiscent fire exit signs: An experimental studies, proceedings of conference on Fire Science and Technology- Research & its Implementation, 104-111, CSIR-CBRI, 3^rd -4^th November 2011
18. M K Arora, S. Chauhan, M. Sharma, D P Kanungo, LaSaRiZ: A software for landslide susceptibility zonation and risk assessment using neural network and fuzzy set approaches. Proc. INDOROCK 2011: Third Indian Rock Conference by ISRMTT, October 13-15, Roorkee, 2011
19. N. K. Saxena, Sunil K. Sharma & Sushil Kumar, Effect of fire retardants on generation of smoke and toxic combustion products, proceedings of conference on Fire Science and Technology- Research & its Implementation, 35-43 CSIR-CBRI, 3^rd -4^th November 2011
20. Pradeep Kumar Yadav, Rajeev Kumar Sharma, Sunil K Sharma, Rajiv Kumar, A model for determining optimal required safe evacuation time of a building during fire, Proceedings of conference on Fire Science and Technology- Research & its Implementation, 216-226, CSIR-CBRI, 3^rd -4^th November 2011
21. P.C.Thapliyal, Polymers from renewable resources: Eco-friendly building materials, Proc. International Conference on Green Technologies & Environmental Protection, 8-O6, 84, 2011.
22. P.C.Thapliyal, Performance enhancement of polymeric materials through Nanotechnology, Proc. Third International Multicomponent Polymer Conference (IMPC 2012), 1, 2012.
23. P.K. Champati Ray, R.C. Lakhera, R.S. Chatterjee, S.K. Srivastava, S. Sarkar, D.P. Kanungo, M. S. Singh and K. Bhusan, Landslide hazard zonation in Northeast India, Proc. National Conference on Landslide Hazard-Consequences and Challenges, Sept. 2011, CSIR-CBRI, Roorkee, 16-29, 2011
24. P.K.S. Chauhan, Y. Pandey, D.P. Kanungo, S. Sarkar,A. Dwivedi, Sandeep Kumar and O. P. Sahu, Subsurface investigation of Tangni landslide, Garhwal Himalaya. Proc. National Conference on Landslide hazard-Consequences and Challenges, Sept. 2011,CSIR-CBRI, Roorkee, 115-121, 2011.
25. Rajiv Kumar, M.P. Singh, Sunil K. Sharma and Sushil Kumar, Toxic species in compartment fires, Proceedings of conference on Fire Science and Technology- Research & its Implementation, 96-104, CSIR-CBRI, 3^rd -4^th November 2011.
26. Rajni Lakhani and Subodh Agarwal, Laboratory studies for the evaluation of consolidants and water repellents, International Symposium 2011 on Adhesives and Consolidants for Conservation, Ottawa (Canada), October 17-21, 2011.
27. Rajni Lakhani, Lalit Kumar, S.P.Agarwal and S.K.Bhattacharya, Vermiculite cement tiles for thermal insulation, International green technology symposium, Indore, 31 October to 1 November 2011
28. Rajni Lakhani, Sapna Ghai and S. P. Agrawal, Thermal insulation tiles using vermiculite and cement, 23^rd Annual General Meeting of Materials Research Society of India, Thapar University, Patiala, 103, 13 -15 February, 2012.
29. R.S. Chimote, Shashi, Surendra Kumar and Reshu Sharma, Design of clean agent fire extinguishing system as per NFPA 2001 standards w.r.t. fire hazard scenarios in India, Proceedings of conference on Fire Science and Technology- Research & its Implementation, 191-213, CSIR-CBRI, 3^rd -4^th November 2011
30. S. Karthigeyan and M.Samanta, Lateral response of pile under indirect loading due to adjacent excavations, Proceedings of Indian Geotechnical Conference – 2011 (IGC-2011), Kochi, December 15 – 17, 883-886, 2011.
31. Shorab Jain, M. P. Singh, A. A. Ansari, Performance based fire safety design : Prediction of untenability conditions in assembly hall and corridor using zone and CFD modeling, Proceedings of conference on Fire Science and Technology- Research & its Implementation, 276-288, CSIR-CBRI, 3^rd -4^th November 2011
32. Suvir Singh, S.K. Singh and Ajay Chourasia, Fire in business buildings – A case study, Proceedings of conference on Fire Science and Technology- Research & its Implementation, 327-334, CSIR-CBRI, 3^rd -4^th November 2011
33. S. Mehta, and A.K. Pandey, Improving flexural strength of unreinforced brick masonry under lateral loading, National Conference on Repair and Rehabilitation of Concrete Structures, Noida, UP, India, May 6-7, 425-433, 2011.
34. S. P. Agrawal, Rajni Lakhani, S. R. Karade and P. C. Thapliyal, Bio-degradable eco-pots from forest waste, International Green Technology Symposium, Indore, 31 October to 1 November 2011
35. S.K Panigrahi., V.P Kommula., C. Ketlogetswe, Potential of fly ash utilization in Botswana, 12th biennial International Conference & Africa-UK young professionals’ workshop, Botswana, 14-16 September 2011.
36. S. Sarkar, A. Ghosh, D.P. Kanungo and Z. Ahmad, Slope stability assessment and monitoring of a vulnerable site on Rishikesh-Uttarkashi Highway, Uttarakhand, India, The 2^nd World Landslide Forum, 3-7 October 2011, Rome, Italy.
37. S. Sarkar, D.P. Kanungo and Shaifaly Sharma, Landslide hazard assessment in upper reaches of Alaknanda valley, Proc. National Conference on Landslide Hazard-Consequences and Challenges, September 2011, CSIR-CBRI, Roorkee, 74-81, 2011.

Journals

1. Arghya Deb & S.K. Bhattacharyya, (2010), An investigation into the effect of bonding of FRP wrapped cylindrical concrete columns, Journal for Composites for Construction, ASCE, available online 12 May 2010.
2. A.K. Pandey, (2010), Damage prediction of RC containment shell under impact and blast loading, International Journal of Structural Engineering and Mechanics, Vol. 36 (6), 729-744
3. A.K. Pandey, (2010), A case study of shrinkage and other cracks in pavement quality concrete, Indian Concrete Journal, Vol. 84 (5), May 2010, 49-55.
4. B.M. Suman and G.V. Swamy, (2010), Impact of environment friendly foam insulation on green building, Journal of Indian Building Congress, V.XVII, No.2, 27-32.
5. B.S. Rawat, (2010), Studies on Chlorfluazuron 0.1% based baiting system for termite management in buildings in India, Ann. Entomol., 28(2), 83-87.
6. B. Singh, M.Gupta and Hina Tarannum, (2010), Jute sandwich composite panels for buildings applications, J. Bio-based materials and Bioenergy, Vol. 4, No. 4, 397-407, (USA).
7. B. Singh, M. Gupta, A. Randhawa, S. Tyagi and S. Sharma, (2011), Hybrid polymer networks of unsaturated polyester-urethane as composite matrices for jute reinforcement, J. Applied Polymer Science, Vol. 122, 1206-1218, (USA).
8. Harpal Singh, (2011), Fire retardant rigid polyurethane foam: use of phosphorus-nitrogen additives, Fire Engineer, Vol. 36, No. 3, 21-32.
9. Harpal Singh, (2011), Recent progress in phosphorus-based fire retardant additives for polyurethane foams, Polyurethanes Today, Vol. 5, No. 2, 32-36.
10. K.C. Panda, S.K. Bhattacharyya and S.V. Barai, (2010), Shear behavior of R. C. T – beams with U- bonded glass fibre reinforced plastic sheet, Indian Concrete Journal, Oct. 2010.
11. K.C. Panda, S.K. Bhattacharyya & S.V. Barai, (2010), Shear enhancement of R C T – beams strengthened with GFRP sheet in shear zone : Experimental study, International Journal of Earth Sciences & Engineering, Vol. 3, No.01.
12. L.P. Singh, S.K. Agarwal, U. Sharma, S.K. Bhattacharyya and S. Ahalawat (2011), Preparation of silica nanoparticles and its beneficial role in cementitious materials. Nanomater Nanotechnol. 1, 44-51.
13. L. P. Singh, S. K. Bhattacharyya, G. Mishra and S. Ahalawat, (2011), Functional role of cationic surfactant to control the nano size of silica powder, Applied Nanoscience, 1, 117-122.
14. M. Chakradhara Rao, S.K. Bhattacharyya and S.V. Barai, (2010), Behaviour of recycled aggregate concrete under low velocity impact, Journal of Construction and Building Materials (Elsevier), Doi: 10.1016/j.conbuildmat. 2010.06.055
15. M. Chakradhara Rao, S. K. Bhattacharyya and S.V. Barai, (2010), Influence of field recycled coarse aggregate on properties of concrete, Journal of Materials and Structures (Springer), June 2010, Doi: 10.1617/s11527-010-9620-x.
16. M. Gupta, Monika, Naseeba Khatoon and B. Singh, (2010), Studies on bio-composites based on pine needles and isocyanate adhesives, Journal of Bio-based Materials and Bioenergy, Vol. 4, No. 4, 353-362, (USA).
17. M. Gupta, Monika, Naseeba Khatoon and B. Singh, (2010 ), Composite boards from iso cyanate bonded pine needles, J. Applied Polymer Science, Vol. 118, 3477-3489, (USA).
18. Mridul Garg, A. K. Minocha and Neeraj Jain, (2011), Environmental hazard mitigation of waste gypsum and chalk: Use in construction materials, Construction & Building Materials , 250, 944-949.
19. Mridul Garg and Neeraj Jain, (2010), Waste gypsum from intermediate dye industries for production of building materials, Construction & Building Materials, 24 (9), 1632-1637.
20. Mridul Garg and Neeraj Jain, (2010), Utilization of industrial waste for making value added building materials, Civil Engineering & Construction Review, 56-64.
21. Mridul Garg and Neeraj Jain, (2010), Development of masonry cement from waste chalk and phosphogypsum, New Building Materials and Construction World, 260-264.
22. M. Kumar and Rajesh K. Verma, (2010), Fungi diversity, their effects on building materials, occupants and control – A brief review, Journal of Scientific and Industrial Research, Vol 69 (9): 657-661.
23. Neeraj Jain, (2011), Solidification and leachability of Cr(VI) in rice husk ash blended cement, ISRN Civil Engineering, 1-6, doi:10.5402/2011/183158.
24. N. Saxena, D.K. Paul and R. Kumar, (2011), Effects of slip and separation on seismic SSI response of nuclear reactor building, International Journal Nuclear Engineering and Design, 241, 12-17.
25. N.K. Saxena, Sunil Kr. Sharma, Suvir Singh and Suresh Kumar, (2010), Studies on bitumenised mud based cable fire stop, Fire Engineer, Vol. 35(4), 31-38.
26. N.K. Saxena, Sunil Kr. Sharma and Sushil Kumar, (2011), Fire protection of cellulosic lining materials, Fire Engineer, Vol. 36(2),31-32.
27. Rajiv Kumar and Sunil K. Sharma, (2008), Experimental validation of RELIEF- A zone model to predict fire behaviour in enclosures with wall linings, Journal of Applied Fire Science, vol. 17(4), 309-334. (Published in 2010).
28. Rajiv Kumar and Sunil K. Sharma, (2009), Compartment fires : Temperature – time curves, Journal of Applied Fire Science, Vol. 19(4) 287-310. (Published in 2010).
29. S. Chandra, S. Kumar, R. Singh, L.P. Singh and B. Sethi, (2011), Crown ether-dendrimer based potentiometric Na+ sensor electrode, J. of Electroanal. Chem. 651, 185–190.
30. S. Kanodia and P.C. Thapliyal, (2011), Regioselective mono nitration of coumarins using claycop reagent, Journal of Indian Chemical Society, 88(2), 241-244.
31. S. K. Singh, (2011), Polypropylene fibre reinforcement concrete- An overview, Journal of Civil Engineering & Construction Review, Vol. 24, No. 1, 72-81.
32. S. Kumar, R. Singh, V. K. Gupta, L. P. Singh and B. Sethi, (2011), Molybdate anion recognition through a cationic crowned ionopore based electrochemical sensor: Detection of an environmental pollutant, International Journal of Environmental Sciences, 1(6), 1361-1372.
33. S.R. Karade, (2010), Cement-bonded composites from lignocellulosic wastes, Construction & Building Materials, 24 (8), 1323-1330.
34. S.Sarkar and D.P.Kanungo, (2010), Landslide disaster on Berinag-Munsiyari Road, Pithoragarh district, Uttarakhand, Current Science, Vol.98, No.7, 900-902.
35. S. Sarkar, D.P. Kanungo, P.K.S. Chauhan, (2011). Varunavat landslide in Uttarkashi: Triggering, risk assessment and damage. Quarterly Jour. Engineering Geology and Hydrogeology, Vol. 44, 2011, 17-22.
36. Sunil Kr. Sharma, N.K. Saxena and A.K. Gupta (2008), Flame retardant smoke suppressants for (polyvinylchloride) 1-Metal based organic complexes, Journal of Applied Fire Sciences, Vol. 17 (2), 143-165. (Published in 2010).
37. V. K. Gupta, N. Upadhyay, S. Kumar, R. Singh, L. P. Singh and B. Sethi, (2011), Iron (III) selective electrode based on S-Methyl N-(Methylcarbamoyloxy) thioacetimidate as a sensing material, International J. of Electrochem. Sci., 6, 650.

Conferences/seminar/workshops

1. A. Ghosh, S. Sarkar, D. P. Kanungo, P.K.S. Chauhan and Z. Ahmed, (2010), Stability assessment and suggestion for control measures of a potential landslide slope on NH 94, Uttarakhand Himalaya, India, 5th Int. Conf. on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, San Diego, California.
2. Abha Mittal, D. P. Kanungo and Shaifaly Sharma, (2010), Prediction of peak ground acceleration using artificial neural network for Himalayan region, 14th Symposium on Earthquake Engineering, IIT Roorkee, India, 17-19 Dec., 2010,
3. A. Bhar, S. K. Satsangi and S. K. Bhattacharyya, (2010), Finite Element Analysis of stiffened functionally graded annular sector plates, ICTACEM, held at IIT Kharagpur, December 2010.
4. A Bhar, S. K. Satsangi and S. K. Bhattacharyya, (2010) Natural vibration analysis of laminated composite stiffened annular sectorial plates, 55th International Seminar on Theoretical and Applied Mechanics, NIT, Hamirpur.
5. Anupam Mittal & Pradeep Kumar, (2011), Prediction of stability of rectangular underground openings in stratified formations using Equivalent Material Modeling (EMM), Conference on Landslide Hazard-Consequences & Challenges, CSIR-CBRI Roorkee, India, 10-12 Feb. 2011.
6. Ajay Chourasia, Ayon Mohan Ghosh, J. Parashar and S.K.Singh, (2010), Structural health monitoring of buildings using wireless sensors : A review, 14th Symposium on Earthquake Engineering, IIT Roorkee, India, 17-19 Dec. 2010.
7. A. Ghosh, S.Sarkar, D.P.Kanungo, Dalip Kumar, S.K.Jain and B.S.Bisht, (2011), Subsurface investigation of tangni landslide, Garhwal Himalaya, Conference on Landslide hazard-Consequences and Challenges, CSIR-CBRI Roorkee, India. 10-12 Feb. 2011.
8. A K Pandey, (2010), Ductility of RC beams at high strain rates, 14th Symposium on Earthquake Engineering, IIT Roorkee, India, 17-19 Dec. 2010.
9. A. Parihar, N. Saxena and D.K. Paul, (2010), Effects of wall-soil-interaction on seismic response of retaining wall, Fifth International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, SAN Diego, CA, USA, paper no. 6.15a.
10. B.S. Rawat and M. Kaur, (2010), Baiting System: Aadhunik bhawno mein deemak niyantran hetu ek sarvottam upaya, (In Hindi), Rashtriya Sangoshthi-2010 on Nirman Samagriya- Vision 2030 at CSIR- CRRI, New Delhi jointly organized by CSIR-CBRI, Roorkee and CSIR-AMPRI, Bhopal.
11. B. Singh and M. Gupta, (2010), Natural fibre based composite building materials, 2nd International Conference on Natural Polymers and Bio-Materials (ICNP-2010), Kottayam, Kerala, 24-26 Sept., 2010.
12. D.P. Kanungo, (2010), Landslide susceptibility assessment – An attempt towards standardizing the methodology in Indian scenario, International Symposium on a Robust and Resilient Society against Natural Hazards and Environmental Disasters and the Third AUN/SEED-Net Regional Conference on Geo-Disaster Mitigation, Kyoto University, Japan.
13. G. Bhat, N. Saxena and S.K. Prasad, (2010), Static and dynamic behavior of earthen slopes in the region of Uttarkashi, India, Fifth International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, SAN Diego, CA, USA, paper no. 4.37b.
14. Harish Chandra Arora and V Srinivasan, (2011), Evaluation of Distressed Reinforced Concrete Structures and Materials, International Conference on Materials for the Future, Government Engineering College, Trichur, Kerala, 23-25 February 2011,
15. Jaswinder Singh, Neeraj Jain, A. K. Minocha and Deepmala,(2010), Bhawan nirman samugri udyogon se pradushan tatha unka nivaran (in Hindi), Rashtriya Sangoshthi-2010 on Nirman Samagriya- Vision 2030 at CSIR- CRRI, New Delhi jointly organized by CSIR-CBRI, Roorkee and CSIR-AMPRI, Bhopal.
16. L.P. Singh, (2010), Preparation and Applications of Nano-Silica in Cementitious System at INDO-US workshop on Nanotechnology in the Science of Concrete at CSIR-CBRI, Roorkee, Uttarakhand, 14-15 December, 2010.
17. L. P. Singh, S. K. Agarwal, A. K. Minocha, S. K. Bhattacharyya and S. Ahalawat (2010), Controlling the leaching behaviour of calcium in cement hydration using nanoparticles, International conf. on advances in electron microscopy and related techniques and XXXI annual meeting of EMSI 2010, BARC, Mumbai.
18. L.P. Singh, S.K. Agarwal & S. Ahalawat, (2010), Reducing the calcium leaching in cementitious system using nanomaterials, 5th UCOST Science Congress, Dehradun, during 10-12 Nov. 2010.
19. L.P. Singh, S.K. Agarwal, A.K. Minocha, Ruchika Goel, (2010), Aodhogik upsiston ke oopyog dwara eiton ka ootpadan aur urja sanraksan, (in Hindi), Rashtriya Sangoshthi -2010 on Nirman Samagriya- Vision 2030 at CSIR-CRRI, New Delhi jointly organized by CSIR-CBRI, Roorkee and CSIR-AMPRI, Bhopal.
20. L. Chaurasia and Rajesh K.Verma, (2010), Bhawano mein paye jane wali vanaspaticvardhia evam upchar, (in Hindi), Rashtriya Sangoshthi -2010 on Nirman Samagriya- Vision 2030 at CSIR-CRRI, New Delhi jointly organized by CSIR-CBRI, Roorkee and CSIR-AMPRI, Bhopal.
21. Mridul Garg, Neeraj Jain and Shilpi Agarwal, (2010), Flourogypsum dwara farshi tilo ka nirman, (in Hindi), Rashtriya Sangoshthi-2010 on Nirman Samagriya- Vision 2030 at CSIR- CRRI, New Delhi jointly organized by CSIR-CBRI, Roorkee and CSIR-AMPRI, Bhopal.
22. Manpreet Kaur and B.S. Rawat, (2010), Bhavno mein deemak niyantran hetu paadap niskarshon ki upyogita (in Hindi), Rashtriya Sangoshthi-2010 on Nirman Samagriya- Vision 2030 at CSIR- CRRI, New Delhi jointly organized by CSIR-CBRI, Roorkee and CSIR-AMPRI, Bhopal
23. M. Chakradhara Rao, S. K. Bhattacharyya and S.V. Barai, (2010), Influence of recycled aggregates on mechanical properties of concrete, The 5th Civil Engineering conference in the Asian Region and Australasian Structural Engineering Conference, Sydney, Australia.
24. M. Chakradhara Rao and S. K. Bhattacharyya, (2010), Recycled aggregates: A sustainable construction material, National Conference on Sustainable Development of Urban Infrastructure, VNIT, Nagpur.
25. Neeraj Jain, A. K. Minocha and Jaswinder Singh, (2010), Ent bhatto se utpa paryavaraniya pradushan, dushprabhav avam niyantran prodyyogiki, (In Hindi), Rashtriya Sangoshthi-2010 on Nirman Samagriya- Vision 2030 at CSIR- CRRI, New Delhi jointly organized by CSIR-CBRI, Roorkee and CSIR-AMPRI, Bhopal.
26. Neeraj Jain, Mridul Garg, A. K. Minocha and Jaswinder Singh, (2011), Solidification and leachability of Cr(VI) in rice husk ash blended cement, 98th Indian Science Congress, SRM University, Kattankulathur, Chennai, 3- 7 Jan. 2011
27. P. C. Thapliyal, (2010), Nanocoatings for building applications, Proc. Indo-US International Workshop on ‘Nanotechnology in the Science of Concrete’, CBRI, Roorkee, 2010. P. 69.
28. P. C. Thapliyal, (2010), Nanotechnology based multifunctional coatings for buildings, International Conference on Recent Trends in Materials Science & Technology (ICMST 2010), VH3, 3.
29. P.K. Champati Ray, R.C. Lakhera, R.S. Chatterjee, S.K. Srivastava, S. Sarkar, D.P. Kanungo, M. S. Singh and K. Bhusan, (2011), Landslide hazard zonation and mitigation measures in Northeast India, National Conference on Landslide hazard-Consequences and Challenges, CSIR-CBRI, Roorkee, 10-12 Feb. 2011.
30. P.K.S. Chauhan, Y. Pandey, D.P. Kanungo, S. Sarkar, A. Dwivedi, Sandeep Kumar and O. P. Sahu, (2011), Pipalkoti landslide – a case study, National Conference on Landslide hazard-Consequences and Challenges, CSIR-CBRI, Roorkee, 10-12 Feb. 2011.
31. P. Nagarajan, N. Saxena and P. Agarwal, (2010), Seismic design of base isolated RC framed multistoreyed building 14th European Conference on Earthquake Engineering, Ohrid, Republic of Macedonia, paper Id 1044.
32. P, Nagarajan, N. Saxena and P. Agarwal (2010), Time domain seismic response of base isolated RCC framed building, 14th Symposium on Earthquake Engineering, IIT Roorkee, India 17-19 Dec. 2010, paper no. A0095.
33. P.K.S. Chauhan and Y. Pandey, (2010), Site response studies of Yamuna river floodplains in Delhi 14th Symposium on Earthquake Engineering, IIT Roorkee, India, 17-19 Dec., 2010.
34. Pradeep Kumar and Prabhat Kumar, (2010), Building construction on soils susceptible to liquefaction and uplift, International Conference on Advances in Materials, Mechanics and Management, College of Engineering, Trivandrum, Kerala, India, 14-16 Jan 2010, Vol. II, P 415.
35. Pradeep Kumar, G. Ranjan, V. A. Sawant, V. A. Patil and K. B. Ladhane, (2011), Field study on GAP system for resistance of tensile forces, National Conf. on Recent Advances in Ground Improvement Techniques (RAGIT 2011), CSIR-CBRI Roorkee (India), 24-25 Feb. 2011.
36. Pradeep Kumar, V. A. Sawant, V A Patil, K. B. Ladhane, (2011), Robust foundation system for resistance of uplift forces in weak soil, National Conf. on Recent Advances in Ground Improvement Techniques (RAGIT 2011), CSIR-CBRI Roorkee (India), 24-25th Feb. 2011.
37. Richa Singh and S. P. Agrawal, (2010), A review on bio-degradable composite for building applications, National conference on Advances in Polymer Science and Technology (APST-2010), Department of Applied Chemistry, National Institute of Technology, Hamirpur, 22-24 October 2010.
38. Rajni Lakhani and Anupam Singh, (2010), Preparation and characterization of polymer blend, International Conference on Polymer Science and Engineering: Engineering Dimensions PSE-2010, 26-27 November 2010, organised by Punjab University, Chandigarh under the auspices of Asian Polymer Association.
39. Rajni Lakhani, (2010), Uchch nishpadan farshi tayalo ka vikas, (in Hindi), Rashtriya Sangoshthi-2010 on Nirman Samagriya- Vision 2030 at CSIR- CRRI, New Delhi jointly organized by CSIR-CBRI, Roorkee and CSIR-AMPRI, Bhopal.
40. S. Ahalawat & L. P. Singh, (2010), Studies on role of nanotechnology in construction, 2nd Rashtriya Yuva Vaigyanik Sammelan-2010, Dehradun, Feb 6-7. 2010.
41. S.R. Karade, A.K. Mittal, P.C. Thapliyal and S.P. Agrawal, (2010), Tap bijli sanyantro me concrete sanrachnao ka upkarsh tatha marammat avam sanrakshan karya, (in Hindi), Rashtriya Sangoshthi-2010 on Nirman Samagriya- Vision 2030 at CSIR- CRRI, New Delhi jointly organized by CSIR-CBRI, Roorkee and CSIR-AMPRI, Bhopal
42. S.R Karade, (2010), Polymer based materials for repair of concrete structures, Workshop on Innovative Methods in Concrete Construction (IMCC-2010), organized by the Indian Society for Construction Materials & Structures and Institution of Engineers (India) Local Centre’ at Roorkee.
43. S.K. Agarwal (2010), Kam kharchile kam urja wali navin avam unnat bhawan samagriya, Rashtriya Sangoshthi-2010 on Nirman Samagriya-Vision 2030 at CSIR- CRRI, New Delhi jointly organized by CSIR-CBRI, Roorkee and CSIR-AMPRI, Bhopal.
44. S. Karthigeyan ,(2010), Numerical investigation of the lateral response of pile groups under combined loading, Indian Geotechnical Conference–2010 (IGC-2010), IIT Bombay, Mumbai, 16– 18 December, 2010, pp. 925 – 928.
45. S. Sarkar, D.P Kanungo and Shaifaly Sharma, (2011), Landslide hazard assessment in upper reaches of Alaknanda valley, National Conference on Landslide hazard-Consequences and Challenges, CSIR-CBRI, Roorkee, 10-12 Feb. 2011.
46. S.G. Dave, (2010), Affordable housing technologies: A case study, National Workshop on Affordable Housing in Rural Areas at Bhopal, M.P., 19-20 Oct., 2010
47. S.G. Dave, (2011), Field demonstration of appropriate low cost housing in 7 regions of India, National Workshop on Rural Technologies for Sustainable Livelihood organized at NIRD Hyderabad, A.P. , 04 Feb., 2011.
48. S.G. Dave, (2011), Pre-fabricated components for construction industry, Workshop on Green Buildings, organized by Centre of Science & Technology (COSTFORD) at Thrissure, Kerala, 4-5 March, 2011
49. S. Maiti, A.K. Minocha and M. Garg, (2011), Use of fly ash and zeolite for the removal of heavy metals from waste water- A review, Proceedings of the International Conference on Sustainable Water Resource Management and Treatment Technologies, CSIR-NEERI, Nagpur, January 19-21, 2011, 413-420.
50. V. A. Sawant, Pradeep Kumar and Gopal Ranjan, (2010), Granular anchor pile system for resisting uplift forces (Paper 111T11), Indian Geotechnical Conference (IGC 2010), IIT Bombay, India, 14-16 Dec 2010 .
51. V Srinivasan and S.K Negi, (2011), Energy efficient small settlements: Sustainable building approach, Conference on Advances in Materials and Structures, Pondicherry Engg. College, 3-4 Feb 2011.
52. V Srinivasan, S.K Singh and S.K Negi, (2011), Green building challenges and assessment of building construction –An overview National Energy Management in Buildings and Services, organized by Chief Engineer Bareilly Zone, Bareilly, 4th Feb 2011.
53. V Srinivasan and S.K Negi, (2010), Sustainable precast construction for hill areas, Sustainable Development of Hill Areas, IIT Roorkee, 11 Dec. 2010.
54. V Srinivasan & Harish Chandra Arora, (2011), Assessment, distress diagnosis & rehabilitation of structures, National Conference on Advances in Materials and Structures, Pondicherry Engineering College, Pondicherry, 3-4 February 2011.
55. Y. Pandey, D.P. Kanungo, P.K.S. Chauhan, S. Sarkar, Zamir Ahmad, O. P. Sahu and Sandeep Kumar , (2011), Surface movement monitoring of tangni landslide, Garhwal Himalaya, National Conference on Landslide hazard-Consequences and Challenges, CSIR-CBRI, Roorkee, 10-12 Feb. 2011.

Y. Pandey and P.K.S. Chauhan, (2010), Strong ground motion data from Delhi region, 14th Symposium on Earthquake Engineering, IIT Roorkee, India, 17-19 Dec., 2010.

1. Karade S. R., Thapliyal P. C. and Agrawal S. P. Influence of Aggressive Exposure Conditions on Performance of Repair Materials. Proc. Conference on Trends and Challenges in Structural Engineering and Construction Technologies. Feb. 11-12, 2009 at C. B. R. I., Roorkee.
2. Panigrahi S. K., Chakraverty S. and Mishra, B. K., Application of genetic algorithm for system identification of a shear structures with noisy sparse modal information, Trends and Challenges in Structural Engineering and Construction Technologies, 11-12 Feb. 2009, CBRI, Roorkee.
3. Panigrahi S. K., Chakraverty S. and Mishra, B. K., A New Approach for Damage Identification in Multi Storey Shear Structure from Sparse Modal Information, Trends and Challenges in Structural Engineering and Construction Technologies, 11-12, February 2009, CBRI Roorkee, India.
4. Singh Harpal and Jain A.K, Ignition, Combustion, Toxicity and Fire Retardancy of Polyurethane Foams: a Comprehensive Review, Journal of Applied Polymer Science, Vol. 111, No. 2, pp. 1115-1143, 2009.
5. Suman.B. M. and Srivastava R. K. Influence of Thermal Insulation on Conductive Heat Transfer through Roof Ceiling Construction, Journal of Scientific & Industrial Research, Vol.68, March 2009, pp. 248 – 251.
6. Suman B. M., Srivastava R.K. and Chauhan Rashmi, Thermal Behaviour of Fly Ash Mix Concrete, Conference on Trends and Challenges in Structural Engineering and Construction Technologies, CBRI, Roorkee, 11-12 Feb., 2009.

Suman B. M. and Srivastava R. K., Role of Tree Shading in Solar Heat Flux into the Buildings, Journal of Indian Building Congress, Vol. XVI, No.1, 2009.

1. Aggarwal, L. K., Thapliyal, P. C. & Karade S. R. Cement-bonded Composite Boards with Arhar Stalks, Cement & Concrete Composites, 30, 44-51. 2008.
2. Chakraverty S., Saini Himani, and Panigrahi S. K., Prediction of Compressive strength using simplex Lattice Design for Mixture Proportions in Ternary Systems of Fly Ash-Cement-Sand Bricks, Indian Concrete Journal, Vol. 82, No.7, July 2008.
3. Dharmaraju R., Ramakrishna, V. V. G. S. T., Karthigeyan, S. and Gayathri Devi, Liquefaction Potential of Chandigarh City- A Conventional Approach, 12^th Interernational Conference of International Association of Computer Methods and Advances in Geomechanics , Goa, October, 1-6, 2008, pp. 2804-2810.
4. Dhawan, Astha & Thapliyal, P. C. Sustainable Development towards Green Buildings, National Seminar on Corporate Governance, April 5, Roorkee, India, 2008.
5. Karade S. R., Mittal A. K. Thapliyal P.C. and Agrawal S. P. . Deterioration and Repair of Concrete Structures in Thermal Power Plants Proc. Structural Engineers Congress(SEC-2008), Chennai, Dec. 18-20, 2008 pp. 1227-1236.
6. Karade S. R., Spreadsheet Applications in Building Material Research Studies. Proc. Conference on Challenges and Applications of Mathematical Modelling Techniques in Building Science and Technology (CAM2TBST), Central Building Research Institute, Roorkee. February 7-8, 2008
7. Karthigeyan, S., Numerical Investigation of the Effect of Combined Loading on the Lateral Response of Piles in Sand, Published in Challenges and Applications of Mathematical Modeling Techniques in Building Science and Technology (CAM2TBST), February 7-8, 2008, Central Building Research Institute, Roorkee, India.
8. Khan, M. Shahiq, Prasad, J.and Suman, B. M., Thermal Properties of High Volume Flyash Concrete, The Indian Concrete Journal, May 2008.
9. Kumar Shree, Jain H. K. and Suman B. M., Potential of Light Emitting Diodes for Lighting of Buildings, Published in 3^rd Uttarakhand State Science and Technology Congress, 2008.
10. Panigrahi S. K., Chakraverty S. and Mishra, B. K., Application of genetic algorithm for damage identification of non-homogenous tapered beam, Journal of Computer Methods in Material Science, 8(2), P93-102, 2008
11. Panigrahi S. K., Chakraverty S. and Mishra, B. K., Identification of structural parameters of Multistory shear structures from Minimum Numbers of model data, challenges and Application of Mathematical Modeling Techniques in Building Science and Technology, Proc. of CBRI Diamond Jubilee Year Conference, CBRI, Roorkee, Feb. 7-8, 2008.
12. Panigrahi S. K., Chakraverty S. and Mishra, B. K., Genetic algorithm based damage Identification in Non-homogenous Structural Members, Challenges and applications of mathematical Modeling techniques in Building science and Technology, Proc. of CBRI Diamond Jubilee year Conference, CBRI, Roorkee, Feb. 7-8, 2008.
13. Panigrahi S. K., Chakraverty S. and Mishra, B. K., Damage Identification in vibrating lumped mass systems using genetic algorithm, The Sixth Structural Engg. Convention, SERC, Chennai, 18-20, Dec. 2008.
14. Rajagopal K. and Karthigeyan, S., Influence of Combined Vertical and Lateral Loading on the Lateral Response of Piles, Published in the Porceeding of 12^th International Conference of International Association of Computer Methods and Advances in Geomechanics, Goa, October, 1-6, 2008, pp. 3272-3282.
15. Singh Harpal, Jain A. K. and Sharma T. P., Effect of Phosphorus-Nitrogen Additives on Fire Retardancy of Rigid Polyurethane Foams, Journal of Applied Polymer Science, Vol. 109, No. 4, pp. 2718-2728, 2008.
16. Singh Harpal and Jain A. K., Effects of Blowing Agents on the Characteristics of Rigid Polyurethane Foam, Appliance, A canon communications LLC publication, Los Angeles, USA, Vol. 65, No. 2, pp. 22-27, February 2008.
17. Singh Harpal and Singh Suvir, Burning Behaviour Characteristics of Toluene Diisocyanate (TDI) in Flexible Polyurethane Foam Fire Environment, Fire Engineer, Volume 33, No. 1, pp. 13-21, January-March, 2008
18. Singh Harpal and Jain A. K, Density, Cell Morphology and Flammability Characteristics of Rigid Polyurethane Foam Blown with Chemical and Physical Blowing Agents, Polyurethanes Today, Vol. 1, No. 4, pp. 39-45, January-March, 2008
19. Singh Harpal, A Profile of a Scientist: Fire Retardant Rigid Polyurethane Foam, Polyurethanes Today, Vol. 1, No. 5, pp. 30-33, June, 2008
20. Singh Harpal and Jain A. K, Phosphorus-Nitrogen (P-N) Based Additives Impregnated Fire Retardant Rigid Polyurethane Foam (RPUF), International Conference on Polyurethane, PUTECH-2008, pp. 217-228, India Expo Centre, Greater Noida (New Delhi), India, March 12-13, 2008.
21. Singh Harpal, Calculation of Blowing Agents and the Flammability Characteristics of rigid Polyurethane Foam (RPUF), Conference on Challenges and Applications of Mathematical Modeling Techniques in Building Science and Technology (CAM2TBST), Central Building Research Institute, Roorkee, Vol. II, pp. 511-520, February 7-8, 2008.
22. Singh R. D., Energy Efficient & Planning of Small Settlements as a Sustainable Building Approach, World Sustainable Congress, Australia, Sept., 2008.
23. Suman B. M. and Srivastava R. K., Effect of Air Gap on Thermal Performance of Composite Wall Section, Indian Journal of Science and Technology, Vol1.No.5, October2008.
24. Suman B. M. and Srivastava R. K., Summer Period Analysis of Performance of Insulated Roof Energy Saving and Thermal Comfort in Buildings, NBM & CW, October, 2008.
25. Thapliyal, P. C. & Dhawan, Astha Diffusion Processes in Organic Protective Coatings. All India Conference on Challenges & Applications of Mathematical Modeling Techniques in Building Science & Technology. February 7-8, Roorkee, India. 2008.

Verma R. K., Chaurasia L., and Katiyar S., Potential Antifungal Plants for Controlling Building Fungi, Natural Product Radiance, 7 (4): 374-387, 2008.

1. Aggarwal, L.K., Thapliyal P.C. and Karade, S.R. . Properties of Polymer-Modified Mortars using Epoxy and Acrylic Emulsions. Construction and Building Materials. 21:379–383. 2007
2. Aggarwal, L. K., Thapliyal, P. C. & Karade S. R. Anti-corrosive Properties of the Epoxy-Cardanol Resin based Paints. Progress in Organic Coatings, 59, 76-80. 2007.
3. Dhawan, Astha & Thapliyal, P. C. Global Warming- A Universal Threat. National Seminar on Threats: Global Warning to Global Warming, March 31, Roorkee, India, 65. 2007.
4. Karade S. R. and Agrawal S.P., Testing and Evaluation of Repair Materials. Proc. Structural Engineers World Congress, Bangalore, Nov. 2-7, 2007, Paper No. 291.
5. Karade S. R., Developments in Cement-Bonded Composite Material Technology. Proc. National Seminar on Modern Trends in Architectural and Civil Engg. Practices, Roorkee, 23-24 Nov. 2007, pp. 57-64
6. Karthigeyan, S., Ramakrishna, V. V. G. S. T. and Rajgopal K., Numerical Investigation of the Effect of Vertical Load on the Lateral Response of Piles, Journal of Geotechnical and Geo environmental Engineering, ASCE,vol.133,No.5, May 2007,pp512-521.
7. Karthigeyan, S., Ramakrishna, V. V. G. S. T. and Rajgopal K., Numerical Investigation of the Effect of Vertical Load on the Lateral Response of Piles, Journal of Geotechnical and Geo environmental Engineering, ASCE,vol.133,No.5, May 2007,pp512-521.
8. Panigrahi S. K., Chakraverty S. and Mishra, B. K., Identification of Damage in Structural members using genetic Algorithm, National Conference on Emerging Technology and Developments in Civil Engineering, Govt. College of Engineering, Amravati, March, 22-23,2007
9. Panigrahi S. K., Chakraverty S. and Mishra, B. K., Genetic Algorithm based damage Identification in Tapered Structural members, Second Uttarakhand State Science Congress, Dehradun, Kumaun University, Nainital, Nov. 15-17, 2007.
10. Ramakrishna, V. V. G. S. T. Karthigeyan S. and Sharma A.K., Pile Load Capacity from Low Strain Integrity Tests, Published in proc. of 13^th Asian Regional Conference, Kolkata, December 2007, pp. 317-320.
11. Singh Harpal, Sharma T. P and Jain A. K., Reactivity of Raw Materials and Their Effects on Structure and Properties of Rigid Polyurethane Foams, Journal of Applied Polymer Science, Vol. 106, No. 2, pp. 1014-1023, 2007.
12. Singh Harpal, Kapde ki Jawalanshilata evam Aagni Avrodhi Upchar (Flammability of Textile and Fire Retardant Treatment), Indian Institute of Technology, New Delhi, Gigyasa, Number 21, pp. 98-109, 2007.
13. Singh Harpal, Aab Aag se Be-asar Honge Kapade evam Kapade ke Shamihane (Fire Unaffected Textile and Shamiyanas), Indian Institute of Technology, Roorkee, Manthan, Number 5, pp. 41-47, 2007.
14. Singh Harpal, and Jain A. K., Effect of Chemical and Physical Blowing Agents on the Density, Cell Morphology and Flammability of Rigid Polyurethane Foam, Polyurethanes 2007 Technical Conference, in partnership with UTECH North America Exhibition. Gaylord Palms Resort and Convention Center Orlando, Florida, USA, pp. 1-15, September 24-26, 2007
15. Singh Harpal, and Jain A. K., Effect of Chemical and Physical Blowing Agents on the Density, Cell Morphology and Flammability of Rigid Polyurethane Foam, Polyurethanes 2007 Technical Conference, in partnership with UTECH North America Exhibition. Gaylord Palms Resort and Convention Center Orlando, Florida, USA, pp. 1-15, September 24-26, 2007
16. Singh Harpal, Fire retardant insulation foam for buildings, National seminar on Modern trends in architectural and civil engineering practices, Institution of Engineers, Indian Institute of Technology, Roorkee, pp. 185 – 198, November 23-24, 2007
17. Singh R. D. and Bhatnager N. K., Missing Approach to Integrated Urban Planning– Case of Roorkee town, Uttarakhand, Journal of Indian Building Congress, June 2007.
18. Singh R. D., Gupta A. K., and Suman B. M., Green Built-Environment in Small Settlement through Planning Patterns, IBC News, Vol.10, Issue 1, Jan.-March, 2007.
19. Singh R. D., Gupta A. K., and Suman B. M., Green Built-Environment in Small Settlement through Planning Patterns, IBC News, Vol.10, Issue 1, Jan.-March, 2007.
20. Suman B. M. and Srivastava R. K., Mathematical Modeling of Transient Time-Temperature Distribution in Semi-Infinite Composite Plates, Published in International Conference on Advanced Materials and Composites, Oct 24-26, 2007.
21. Thapliyal, P. C. Phosphorescent Pigments: Opportunities and Challenges. Everyman’s Science, 42, 76-79. 2007.
22. Verma R. K., Chaurasia L., and Katiyar S., Fungal Decay in Building Materials and their Alternative Control , Proc. of the all India Seminar on Modern Trends in Architectural and Civil Engineering Practices, Nov. 23-24, 2007, Institution of Engineers, Roorkee local center, Roorkee, India, 89-93.
23. Verma R. K., Chaurasia L., and Katiyar S., Evaluation of Antifungal Potency of Citrus Essential Oils against Building Fungi, Pestology, 31(1): 29-31, 2007.